Omnidirectional treadmill

Last updated
U.S. Army Research Lab's ODT with CAVE Graphics ARL ODT.jpg
U.S. Army Research Lab's ODT with CAVE Graphics

An omnidirectional treadmill (ODT) is a mechanical device, similar to a typical treadmill, that allows a person to perform locomotive motion in any direction, allowing for 360 degrees of movement. The ability to move in any direction is how these treadmills differ from their basic counterparts (that permit only unidirectional locomotion). [1]

Contents

Omnidirectional treadmills are employed in immersive virtual environment implementations to allow unencumbered movement within the virtual space. [2]

Advantages to pairing an ODT with an immersive virtual environment include:

Future directions and discussion

Natural navigation employing the ODT has two fundamental, parallel paths. One path seeks to create wholly immersive, obstruction free environments as in virtual reality, while the other seeks a lower cost, more restricted device. The immersive vision is that of a large active surface upon which the user is able to walk freely and unfettered. The second approach employs a harness for tracking, and optionally provides whole-body force feedback.

Both approaches have their advantages and disadvantages. Without a harness, the ODT user is able to accelerate away from center of the surface. The system must recognize this using a variety of sensing means, and gently accelerate the user back towards the center. Keeping the forces that return the user to center below the human sensing threshold is the main challenge with these systems. The larger the active surface, the easier it is to control using this means.

Additional routes are available, for example employing the mechanisms of two standard treadmills, one for the X and one for the Y axis. In such a setup, the mechanism for one axis would lay within the other, the belts typically being replaced with something akin to a wire ladder, and studs being used on footwear.

With a harness, the user is kept on center mechanically, and the surface area can be made much smaller. But actions such as rolling are not possible. On the plus side, a harness can provide body forces such as inertia or slope display. In addition, the harness may provide lifting force to simulate free-body flight. And the well-defined user space makes interaction with outside haptic devices feasible.

Omnidirectional treadmills have the potential to also be used in film, such as in conjunction with a green screen. This type of application would allow limitless movement by the actors. [3]

See also

Related Research Articles

Virtual reality Computer-simulated experience

Virtual reality (VR) is a simulated experience that can be similar to or completely different from the real world. Applications of virtual reality include entertainment, education and business. Other distinct types of VR-style technology include augmented reality and mixed reality, sometimes referred to as extended reality or XR.

Augmented reality View of the real world with computer-generated supplementary features

Augmented reality (AR) is an interactive experience of a real-world environment where the objects that reside in the real world are enhanced by computer-generated perceptual information, sometimes across multiple sensory modalities, including visual, auditory, haptic, somatosensory and olfactory. AR can be defined as a system that incorporates three basic features: a combination of real and virtual worlds, real-time interaction, and accurate 3D registration of virtual and real objects. The overlaid sensory information can be constructive, or destructive. This experience is seamlessly interwoven with the physical world such that it is perceived as an immersive aspect of the real environment. In this way, augmented reality alters one's ongoing perception of a real-world environment, whereas virtual reality completely replaces the user's real-world environment with a simulated one. Augmented reality is related to two largely synonymous terms: mixed reality and computer-mediated reality.

Haptic technology Any form of interaction involving touch

Haptic technology, also known as kinaesthetic communication or 3D touch, refers to any technology that can create an experience of touch by applying forces, vibrations, or motions to the user. These technologies can be used to create virtual objects in a computer simulation, to control virtual objects, and to enhance remote control of machines and devices (telerobotics). Haptic devices may incorporate tactile sensors that measure forces exerted by the user on the interface. The word haptic, from the Greek: ἁπτικός (haptikos), means "tactile, pertaining to the sense of touch". Simple haptic devices are common in the form of game controllers, joysticks, and steering wheels.

Telerobotics

Telerobotics is the area of robotics concerned with the control of semi-autonomous robots from a distance, chiefly using television, wireless networks or tethered connections. It is a combination of two major subfields, which are teleoperation and telepresence.

Treadmill Exercise machine

A treadmill is a device generally used for walking, running, or climbing while staying in the same place. Treadmills were introduced before the development of powered machines to harness the power of animals or humans to do work, often a type of mill operated by a person or animal treading the steps of a treadwheel to grind grain. In later times, treadmills were used as punishment devices for people sentenced to hard labor in prisons. The terms treadmill and treadwheel were used interchangeably for the power and punishment mechanisms.

VirtuSphere

VirtuSphere is a spherical virtual reality device. It consists of a 10-foot hollow sphere, which is placed on a special platform that allows the sphere to rotate freely in any direction according to the user’s steps. It works with computer based simulations and virtual worlds, and rotates as the user walks, allowing for an unlimited plane upon which the user can walk. A wireless head-mounted display with gyroscopes is used to both track the user's head movement as well as display the environment of the virtual world. VirtuSphere can serve many purposes, including exercise, video gaming, military training, and virtual museum tours.

A virtual fixture is an overlay of augmented sensory information upon a user's perception of a real environment in order to improve human performance in both direct and remotely manipulated tasks. Developed in the early 1990s by Louis Rosenberg at the U.S. Air Force Research Laboratory (AFRL), Virtual Fixtures was a pioneering platform in virtual reality and augmented reality technologies.

360-degree video Visual arts technique

360-degree videos, also known as surround video, or immersive videos or spherical videos, are video recordings where a view in every direction is recorded at the same time, shot using an omnidirectional camera or a collection of cameras. During playback on normal flat display the viewer has control of the viewing direction like a panorama. It can also be played on a display or projectors arranged in a sphere or some part of a sphere.

Immersion (virtual reality) Perception of being physically present in a non-physical world

Immersion into virtual reality (VR) is a perception of being physically present in a non-physical world. The perception is created by surrounding the user of the VR system in images, sound or other stimuli that provide an engrossing total environment.

In computing, 3D interaction is a form of human-machine interaction where users are able to move and perform interaction in 3D space. Both human and machine process information where the physical position of elements in the 3D space is relevant.

Vortex Studio is a complete simulation software platform. It features a high-fidelity, realtime physics engine developed by CM Labs Simulations that simulates rigid body dynamics, collision detection, contact determination, and dynamic reactions. It also contains model import and preparation tools, an image generator, and networking tools for distributed simulation, accessed through a desktop editor via a GUI. Vortex adds accurate physical motion and interactions to objects in visual-simulation applications for operator training, mission planning, product concept validation, heavy machinery and robotics design and testing, haptics devices, immersive and virtual reality (VR) environments.

Astronaut training Preparing astronauts for space missions

Astronaut training describes the complex process of preparing astronauts in regions around the world for their space missions before, during and after the flight, which includes medical tests, physical training, extra-vehicular activity (EVA) training, procedure training, rehabilitation process, as well as training on experiments they will accomplish during their stay in space.

Virtuix Omni

The Virtuix Omni is an omnidirectional treadmill simulator for virtual reality games and other applications. It uses a platform to simulate locomotion i.e. the motion of walking, requiring both special shoes or shoe covers and a surface that reduces friction. It works in conjunction with the HTC Vive, and allows a vive user to walk within a limited number of games.

Haptic suit Wearable device that provides haptic feedback

A haptic suit is a wearable device that provides haptic feedback to the body.

Cyberith Virtualizer Motion detector in virtual reality applications

The Virtualizer is a series of omnidirectional treadmills with integrated sensors for motion detection in virtual reality applications. The products are being developed, manufactured and sold by the Austrian company Cyberith GmbH.

Virtual reality sickness occurs when exposure to a virtual environment causes symptoms that are similar to motion sickness symptoms. The most common symptoms are general discomfort, headache, stomach awareness, nausea, vomiting, pallor, sweating, fatigue, drowsiness, disorientation, and apathy. Other symptoms include postural instability and retching. Virtual reality sickness is different from motion sickness in that it can be caused by the visually-induced perception of self-motion; real self-motion is not needed. It is also different from simulator sickness; non-virtual reality simulator sickness tends to be characterized by oculomotor disturbances, whereas virtual reality sickness tends to be characterized by disorientation.

Virtual reality sex VR technology

Virtual reality sex is a technology that allows the user to receive tactile sensations from remote participants, or fictional characters through the use of computer-controlled sex toys. Usually the user also wears a virtual reality headset so they can see and interact with the partner. The very first VR Porn experiences were filmed by an award winning studio called VR Bangers. Two entrepreneurs decided to leave their jobs and create an adult studio that films virtual reality sex. They have opened their site vrbangers.com in 2014 and released 21 films that became the very first VR Porn experience in the world. Since then, the studio has been pushing VR technology to another level with more camera and sound innovations for virtual reality.

Virtual reality game Video game played in virtual reality

A virtual reality game or VR game is a video game played on virtual reality (VR) hardware. Most VR games are based on player immersion, typically through head-mounted display unit or headset and one or more controllers. The headset typically provides two stereoscopic displays in front of the user's eyes to simulate a 3D space.

Virtual reality applications Overview of the various applications that make use of virtual reality

Virtual reality applications are applications that make use of virtual reality (VR), an immersive sensory experience that digitally simulates a virtual environment. Applications have been developed in a variety of domains, such as education, architectural and urban design, digital marketing and activism, engineering and robotics, entertainment, virtual communities, fine arts, healthcare and clinical therapies, heritage and archaeology, occupational safety, social science and psychology.

Wizdish ROVR Treadmill and virtual reality peripheral

The Wizdish ROVR is an omnidirectional treadmill that simulates walking and running in virtual reality when used alongside a head-mounted display.

References

  1. Meglio, Marco (2022-08-15). "Using Virtual Reality to Identify Early Signs of Parkinson Disease: Jay Alberts, PhD". neurologylive.com. Neurology Live. Retrieved 2022-08-15.
  2. Lang, Ben (27 May 2014). "Infinadeck is a 1000 Pound Omnidirectional Treadmill Designed and Built By One Man". Road to VR. Retrieved 15 December 2014.
  3. Buckley, Sean. "This treadmill lets you walk in any direction". Engadget. Retrieved 17 February 2015.