Blue laser

Last updated
Trails of a 20 mW 405 nm violet laser shows clear fluorescence on some objects Blacklaser2.jpg
Trails of a 20 mW 405 nm violet laser shows clear fluorescence on some objects

A blue laser emits electromagnetic radiation with a wavelength between 400 and 500 nanometers, which the human eye sees in the visible spectrum as blue or violet. [1]

Contents

Blue lasers can be produced by:

Lasers emitting wavelengths below 445 nm appear violet, but are nonetheless also called blue lasers. Violet light's 405 nm short wavelength, on the visible spectrum, causes fluorescence in some chemicals, like radiation in the ultraviolet ("black light") spectrum (wavelengths less than 400 nm).

History

445-450 nm blue laser (middle) Laser Pointer.jpg
445–450 nm blue laser (middle)

Prior to the 1960s and until the late 1990s, gas and argon-ion lasers were common and suffered from poor efficiencies (0.01%) and large sizes. [7]

In the 1960s, advancements in sapphire creation [8] allowed researchers to deposit GaN on a sapphire base to create blue lasers, but a lattice mismatch between the structures of gallium nitride and sapphire created many defects or dislocations, leading to short lifetimes (<10 hours) and low efficiency (<1%).

Additionally, gallium nitride (GaN) crystal layer construction proved difficult to manufacture as the material requires high nitrogen gas pressures and temperatures, similar to the environment for creating synthetic diamonds.

In 1992, Japanese inventor Shuji Nakamura, while working at Nichia Chemicals, invented the first blue semiconductor LED using an InGaN active region, GaN optical guide and AlGaN cladding, and four years later, the first low-power blue laser; eventually receiving the Millennium Technology Prize awarded in 2006, and a Nobel Prize for Physics along with Professor Isamu Akasaki, and Hiroshi Amano [9] [10] [3] [11] in 2014 for this invention. [12] The gain medium defects still remained too high (106–1010 defects/cm2) resulting in a low-power laser with a short, < 300 hour lifetime using pulsed excitation. [13] [14]

In the late 1990s, Dr. Sylwester Porowski, at the Institute of High Pressure Physics at the Polish Academy of Sciences in Warsaw (Poland), developed technology to create gallium nitride mono-crystals with high structural quality using magnesium doping to create fewer than 100 defects/cm2— at least 10,000 times better than prior attempts. [15] In 1999, Nakamura used Polish-produced GaN crystals, creating lasers with twice the yield and ten times the lifetime of his original designs; 3,000 hours at 30 mW.

In the 2000s, Japanese manufacturers mastered the production of a blue laser with 60 mW of power and long lifetimes, making them applicable for devices that read a dense (due to blue's short wavelength) high-speed stream of data from Blu-ray, BD-R, and BD-RE. Semiconductor lasers enabled the development of small, convenient and low-priced blue, violet, and ultraviolet (UV) lasers, which were previously not available, opening the door for many applications.

Today, blue semiconductor lasers either use a sapphire substrate (primarily used by Nichia, which uses a contract manufacturer: Sony), or a GaN mono-crystal substrate (primarily used by TopGaN [16] ), both covered with layers of gallium nitride. The GaN optical guide layer of the Nichia devices is formed from active region InGaN quantum wells or quantum dots spontaneously via self-assembly.

Polish technology is considered less expensive than the Japanese, but has a smaller share of the market. Another Polish company creates GaN crystals for use in blue diodes – Ammono, [17] [18] but does not produce blue lasers.

Types

Direct Diode Semiconductor lasers

Blue, direct diode semiconductor lasers can be built using inorganic gallium nitride (GaN) or InGaN gain medium, upon which many (dozens or more) layers of atoms are placed to form the active part of the laser that generates photons from quantum wells. Infrared lasers built on gallium arsenide (Ga As) semiconductors use similar manufacturing techniques. To contain the photons in the gain medium, AlGaN cladding is constructed. Using methods similar to those developed for silicon semiconductors such as the inclusion of doping materials (such as magnesium), the substrate can be built free of the type of defect known as dislocations and with uniform carrier distribution, allowing the gain medium atoms to be layered such that the distances between the atoms making up ground and those of the quantum wells are uniformly the same.

Blue, direct diode lasers can also be fabricated with InGaN semiconductors (445 nm through 465 nm). [19] The InGaN devices are perceived as significantly brighter than GaN (405) nm direct diode lasers, since the longer wavelengths are closer to the peak sensitivity of the human eye. [20]

Use of phosphorescent direct diode blue organic light emitting diodes for lasers is impractical, due to poor lifetimes(<200hrs). [21]

Zener diodes can be incorporated into the circuitry to minimize ESD failures. [22]

Semiconductor lasers can be either driven by pulses or continuous wave operation. [23]

Edge or Vertical Cavity Surface Emitting

Semiconductor lasers may be configured to emit photons either perpendicular or horizontal to the lasing medium layers depending on end use.

Direct Diode-pumped solid state (DPSS), frequency doubled lasers

Direct diode infrared semiconductor lasers, readily available since the 1960s, typically as a pump source for telecom lasers, can be frequency-doubled to the blue range by common nonlinear crystals (BBO or KTP). [24] Greater than 1W power can be reached when the frequency doubling is resonator enhanced, resulting in Watt-class sources spanning across the visible spectrum, including a 400 nm blue laser with 2.6 W of output power. [25]

Violet DPSS laser pointers (120 mW at 405 nm) use a direct diode infrared gallium arsenide (1 W @ 808 nm) lasers being directly doubled, without a longer-wave diode-pumped solid state laser interposed between diode laser and doubler-crystal results in higher-power.

Blue DPSS laser pointers, initial availability around 2006, have the same basic construction as DPSS green lasers. They most commonly emit light at 473 nm, which is produced by frequency doubling of 946 nm laser radiation from a diode-pumped Nd:YAG or Nd:YVO4 crystal. [26] Neodymium-doped crystals usually produce a principal wavelength of 1064 nm, but with the proper reflective coating mirrors can be also made to lase at other non-principal neodymium wavelengths, such as the 946 nm transition used in blue-laser applications. For high output power BBO crystals are used as frequency doublers; for lower powers, KTP is used. Output powers available are up to 5000 mW. Conversion efficiency for producing 473 nm laser radiation is inefficient with some of the best lab produced results coming in at 10–15% efficient at converting 946 nm laser radiation to 473 nm laser radiation. [27] Due to low conversion efficiency, use of a 1000 mW IR diode results in at most 150 mW of visible blue DPSS laser light, but more practically 120mW.

Gas or Ion Lasers

Blue gas lasers are large and expensive instruments relying on population inversion in rare gas mixtures which use high currents and large cooling due to poor efficiency: 0.01%. [28] Blue beams can be produced using helium-cadmium gas lasers at 441.6 nm, or argon-ion lasers at 458 and 488 nm,

Blue Visual Appearance

The violet 405 nm laser (whether constructed directly from GaN or frequency-doubled GaAs laser diodes) is not in fact blue, but appears to the eye as violet, a color for which a human eye has a very limited sensitivity. When pointed at many white objects (such as white paper or white clothes which have been washed in certain washing powders) the visual appearance of the laser dot changes from violet to blue, due to fluorescence of brightening dyes.

For display applications which must appear "true blue", a wavelength of 445–450 nm is required. With advances in volume production, 445 nm InGaN laser diodes have dropped in price, becoming an optimal solution for laser phosphor projectors. [29]

Applications

Areas of application of the blue laser include:

See also

Related Research Articles

<span class="mw-page-title-main">Laser</span> Device which emits light via optical amplification

A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The word laser is an anacronym that originated as an acronym for light amplification by stimulated emission of radiation. The first laser was built in 1960 by Theodore Maiman at Hughes Research Laboratories, based on theoretical work by Charles H. Townes and Arthur Leonard Schawlow.

<span class="mw-page-title-main">Light-emitting diode</span> Semiconductor and solid-state light source

A light-emitting diode (LED) is a semiconductor device that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light is determined by the energy required for electrons to cross the band gap of the semiconductor. White light is obtained by using multiple semiconductors or a layer of light-emitting phosphor on the semiconductor device.

<span class="mw-page-title-main">Laser diode</span> Semiconductor laser

A laser diode is a semiconductor device similar to a light-emitting diode in which a diode pumped directly with electrical current can create lasing conditions at the diode's junction.

Wide-bandgap semiconductors are semiconductor materials which have a larger band gap than conventional semiconductors. Conventional semiconductors like silicon have a bandgap in the range of 0.6 – 1.5 electronvolt (eV), whereas wide-bandgap materials have bandgaps in the range above 2 eV. Generally, wide-bandgap semiconductors have electronic properties which fall in between those of conventional semiconductors and insulators.

<span class="mw-page-title-main">Gallium nitride</span> Chemical compound

Gallium nitride is a binary III/V direct bandgap semiconductor commonly used in blue light-emitting diodes since the 1990s. The compound is a very hard material that has a Wurtzite crystal structure. Its wide band gap of 3.4 eV affords it special properties for applications in optoelectronic, high-power and high-frequency devices. For example, GaN is the substrate that makes violet (405 nm) laser diodes possible, without requiring nonlinear optical frequency doubling.

<span class="mw-page-title-main">Nd:YAG laser</span> Crystal used as a lasing medium for solid-state lasers

Nd:YAG (neodymium-doped yttrium aluminum garnet; Nd:Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, neodymium in the +3 oxidation state, Nd(III), typically replaces a small fraction (1%) of the yttrium ions in the host crystal structure of the yttrium aluminum garnet (YAG), since the two ions are of similar size. It is the neodymium ion which provides the lasing activity in the crystal, in the same fashion as red chromium ion in ruby lasers.

<span class="mw-page-title-main">Shuji Nakamura</span> Inventor of the blue LED, 2014 Nobel laureate in physics

Shuji Nakamura is a Japanese-American electronic engineer and inventor of the blue LED, a major breakthrough in lighting technology. Nakamura specializes in the field of semiconductor technology, and he is a professor of materials science at the College of Engineering of the University of California, Santa Barbara (UCSB).

<span class="mw-page-title-main">Laser pointer</span> Handheld device that emits a laser beam

A laser pointer or laser pen is a handheld device that uses a laser diode to emit a narrow low-power visible laser beam to highlight something of interest with a small bright colored spot.

<span class="mw-page-title-main">Indium gallium nitride</span> Chemical compound

Indium gallium nitride is a semiconductor material made of a mix of gallium nitride (GaN) and indium nitride (InN). It is a ternary group III/group V direct bandgap semiconductor. Its bandgap can be tuned by varying the amount of indium in the alloy. InxGa1−xN has a direct bandgap span from the infrared for InN to the ultraviolet of GaN. The ratio of In/Ga is usually between 0.02/0.98 and 0.3/0.7.

<span class="mw-page-title-main">Gallium phosphide</span> Chemical compound

Gallium phosphide (GaP), a phosphide of gallium, is a compound semiconductor material with an indirect band gap of 2.24 eV at room temperature. Impure polycrystalline material has the appearance of pale orange or grayish pieces. Undoped single crystals are orange, but strongly doped wafers appear darker due to free-carrier absorption. It is odorless and insoluble in water.

Aluminium gallium indium phosphide is a semiconductor material that provides a platform for the development of multi-junction photovoltaics and optoelectronic devices. It has a direct bandgap ranging from ultraviolet to infrared photon energies.

Aluminium gallium nitride (AlGaN) is a semiconductor material. It is any alloy of aluminium nitride and gallium nitride.

A photonic integrated circuit (PIC) or integrated optical circuit is a microchip containing two or more photonic components that form a functioning circuit. This technology detects, generates, transports, and processes light. Photonic integrated circuits utilize photons as opposed to electrons that are utilized by electronic integrated circuits. The major difference between the two is that a photonic integrated circuit provides functions for information signals imposed on optical wavelengths typically in the visible spectrum or near infrared (850–1650 nm).

Nichia Corporation is a Japanese chemical engineering and manufacturing company headquartered in Anan, Japan with global subsidiaries. It specializes in the manufacturing and distribution of phosphors, including light-emitting diodes (LEDs), laser diodes, battery materials, and calcium chloride.

<span class="mw-page-title-main">Isamu Akasaki</span> Japanese engineer (1929–2021)

Isamu Akasaki was a Japanese engineer and physicist, specializing in the field of semiconductor technology and Nobel Prize laureate, best known for inventing the bright gallium nitride (GaN) p-n junction blue LED in 1989 and subsequently the high-brightness GaN blue LED as well.

<span class="mw-page-title-main">Ferdinand-Braun-Institut</span>

The Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH) is a research institute, which is a member of the Gottfried Wilhelm Leibniz Scientific Community. The institute is located in Berlin at the Wissenschafts- und Wirtschaftsstandort Adlershof (WISTA), its research activity is applied science in the fields of III-V electronics, photonics, integrated quantum technology and III-V technology

IQE PLC is a British semiconductor company founded 1988 in Cardiff, Wales, which manufactures advanced epitaxial wafers for a wide range of technology applications for wireless, optoelectronic, electronic and solar devices. IQE specialises in advanced silicon and compound semiconductor materials based on gallium arsenide (GaAs), indium phosphide (InP), gallium nitride (GaN) and silicon. The company is the largest independent outsource producer of epiwafers manufactured by metalorganic vapour phase epitaxy (MOCVD), molecular beam epitaxy (MBE) and chemical vapor deposition (CVD).

<span class="mw-page-title-main">Gallium nitride nanotube</span>

Gallium nitride nanotubes (GaNNTs) are nanotubes of gallium nitride. They can be grown by chemical vapour deposition.

Light-emitting diodes (LEDs) produce light by the recombination of electrons and electron holes in a semiconductor, a process called "electroluminescence". The wavelength of the light produced depends on the energy band gap of the semiconductors used. Since these materials have a high index of refraction, design features of the devices such as special optical coatings and die shape are required to efficiently emit light. A LED is a long-lived light source, but certain mechanisms can cause slow loss of efficiency of the device or sudden failure. The wavelength of the light emitted is a function of the band gap of the semiconductor material used; materials such as gallium arsenide, and others, with various trace doping elements, are used to produce different colors of light. Another type of LED uses a quantum dot which can have its properties and wavelength adjusted by its size. Light-emitting diodes are widely used in indicator and display functions, and white LEDs are displacing other technologies for general illumination purposes.

<span class="mw-page-title-main">Pr:YLF laser</span> Type of solid-state laser

A Pr:YLF laser (or Pr3+:LiYF4 laser) is a solid state laser that uses a praseodymium doped yttrium-lithium-fluoride crystal as its gain medium. The first Pr:YLF laser was built in 1977 and emitted pulses at 479 nm. Pr:YLF lasers can emit in many different wavelengths in the visible spectrum of light, making them potentially interesting for RGB applications and materials processing. Notable emission wavelengths are 479 nm, 523 nm, 607 nm and 640 nm.

References

  1. ↑ "The Blue Laser and Its Applications in Industry and Science". Opt Lasers. Retrieved 2023-06-23.
  2. ↑ "GaN Nanowire Lasers" (PDF).
  3. 1 2 Kuchibhatla, Sridhar. "Master's Thesis GaN Blue based diodes".
  4. ↑ Paschotta, Dr Rüdiger. "Blue lasers". www.rp-photonics.com. Retrieved 2023-06-24.
  5. ↑ "StackPath". www.laserfocusworld.com. Retrieved 2023-06-24.
  6. ↑ "StackPath". www.laserfocusworld.com. Retrieved 2023-06-24.
  7. ↑ Paschotta, Dr Rüdiger. "Blue lasers". www.rp-photonics.com. Retrieved 2023-06-24.
  8. ↑ "Sapphire Series Part 3: Modern Synthetic Sapphire Applications | Research & News". www.gia.eduhttps. Retrieved 2023-06-24.
  9. ↑ NobelPrize.org Press Release (7 October 2014): The Royal Swedish Academy of Sciences has decided to award the Nobel Prize in Physics for 2014 to Isamu Akasaki (Meijo University, Nagoya, Japan and Nagoya University, Japan), Hiroshi Amano (Nagoya University, Japan) and Shuji Nakamura (University of California, Santa Barbara, CA, USA) “for the invention of efficient blue light-emitting diodes which has enabled bright and energy-saving white light sources”
  10. ↑ "Nobel Prize Press Release" (PDF).
  11. ↑ "His Blue LEDs Changed How We Light Our World - IEEE Spectrum". spectrum.ieee.org. Retrieved 2023-06-24.
  12. ↑ Shuji Nakamura wins the 2006 Millennium Technology Prize. Gizmag.com (2006-05-17). Retrieved on 2010-10-26.
  13. ↑ Hogan, Melinda Rose and Hank. "A History of the Laser: 1960 - 2019". www.photonics.com. Retrieved 2023-06-24.
  14. ↑ Paschotta, Dr Rüdiger. "Pulsed lasers". www.rp-photonics.com. Retrieved 2023-06-24.
  15. ↑ Porowski, S. (January 1999). "Near Defect Free GaN Substrates". Materials Research Society Internet Journal of Nitride Semiconductor Research. 4 (S1): 27–37. doi: 10.1557/S1092578300002210 . ISSN   1092-5783.
  16. ↑ "TGL". topganlasers.com (in Polish). Retrieved 2023-06-24.
  17. ↑ Stevenson, Richard. "The World's Best Gallium Nitride - IEEE Spectrum". spectrum.ieee.org. Retrieved 2023-06-24.
  18. ↑ "Home". www.ammono.com. Retrieved 2023-06-24.
  19. ↑ "Product Selector - ams-osram - ams". ams-osram. Retrieved 2023-06-24.
  20. ↑ "Peak Sensitivity - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-06-24.
  21. ↑ Lee, Jaesang; Jeong, Changyeong; Batagoda, Thilini; Coburn, Caleb; Thompson, Mark E.; Forrest, Stephen R. (2017-05-31). "Hot excited state management for long-lived blue phosphorescent organic light-emitting diodes". Nature Communications. 8 (1): 15566. doi:10.1038/ncomms15566. ISSN   2041-1723. PMC   5460033 . PMID   28561028.
  22. ↑ "Nichia Laser Diode Spec Sheet" (PDF).
  23. ↑ Paschotta, Dr Rüdiger. "Continuous-wave operation". www.rp-photonics.com. Retrieved 2023-06-24.
  24. ↑ Paschotta, Dr Rüdiger. "Nonlinear crystal materials". www.rp-photonics.com. Retrieved 2023-06-24.
  25. ↑ U. Eismann et al., Active and passive stabilization of a high power violet frequency-doubled diode laser, CLEO: Applications and Technology, pages JTu5A-65 (2016)
  26. ↑ Lasers - Direct Diode vs Diode-Pumped Solid-State (DPSS) , retrieved 2023-06-24
  27. ↑ "The Blue Laser and Its Applications in Industry and Science". Opt Lasers. Retrieved 2023-06-24.
  28. ↑ Paschotta, Dr Rüdiger. "Blue lasers". www.rp-photonics.com. Retrieved 2023-06-24.
  29. ↑ "What's the difference between laser phosphor and RGB laser?". www.barco.com. Retrieved 2023-06-24.
  30. ↑ "Defense Advanced Research Projects Agency Strategic Plan" (PDF). May 2009. p. 18. Archived (PDF) from the original on January 21, 2022. Retrieved 2021-10-25.
  31. ↑ "The Blue Laser and Its Applications in Industry and Science". Opt Lasers. Retrieved 2023-06-24.
  32. ↑ "Kilowatt class Lasers".
  33. ↑ "Lasers and Dyes for Multicolor Flow Cytometry". www.bdbiosciences.com. Retrieved 2023-06-24.
  34. ↑ "WOLF Diode Laser CO2 Laser - Blue Laser ENT". www.arclaser.com. Retrieved 2023-06-23.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.