Stott

Last updated

The Stotts were a family of architects from Oldham, North West England, of Scottish descent who specialised in the design of cotton mills. James Stott was the father, Joseph and his elder brother Abraham Stott had rival practices, and in later years did not communicate. Their children continue their practices.[ clarification needed ]

Contents

Family tree

Stott family of Oldham
James StottMary Henthorn
Abraham Henthorn Stott, Senior
"A.H.Stott"
25 April 1822 – 1904
 A H Stott and sons
  Stott and Sons
James Stott
 Stotts of Oldham
Catering equipment
Joseph Stott
25 October 1836 – 1894
Joseph Stott (1861–1894)
Joseph Stott, Heywood and Ogden (1894–1895)
Joseph Stott and Son (George Stott, 1896–1936)
Jesse Ainsworth Stott
(1853–1917)
 A H Stott and sons
 Stott and Sons
Abraham Henthorn Stott, Junior
(1856–1931) "Henthorn"
 A H Stott and sons
 Stott and Sons
Philip Sydney Stott
"Sydney Stott"
Sir Philip Stott, 1st Baronet'
(1858–1937)
George Stott
(1876–1936)
Joseph Stott and Son (1896–1936)
His sons:
James Stott (1880–)
Harold Stott (1885–)
George Edward Stott
(1887–1957)
Note: Abraham Stott of
 Abraham Stott and Son (Osborne Mills)
was a cousin of A H Stott.

Joseph Stott

Duke Mill, Shaw, 1883, Joseph Stott. DukeMillShaw2007a.jpg
Duke Mill, Shaw, 1883, Joseph Stott.

Joseph Stott was born on 25 October 1836 in Oldham, the third son of James Stott and Mary Henthorn. In the Oldham archives are papers relating to mills designed by Joseph and his practice. [1]

George Stott

Lily No.1 Mill, Shaw,George Stott No 1 mill, Shaw 2004.jpg
Lily No.1 Mill, Shaw,George Stott

The only son of Joseph Stott, George was born in Oldham in 1876. He was educated at Mr Binns' Highfield Academy and Manchester Grammar School. On Joseph Stott's death in 1894 George Stott took over his father's practice, trading as Joseph Stott and Son. George Stott adopted the triple brick arch system of flooring. His mills are known for their proportions and the meticulous detail of their facades. Manor [2] and Kent Mills in Chadderton are two good examples. Another two are the Pine Mill and the Elm Mill (Newby). Stott designed mills in Ramleh Egypt and Brazil. He was a donor to the British Conservative Party. He died in December 1936. [1]

Abraham Henthorn Stott

Houldsworth Mill, Reddish, A H Stott, 1865 Reddish Mill 1.jpg
Houldsworth Mill, Reddish, A H Stott, 1865

Abraham Henthorn Stott was born on 25 April 1822 in the parish of Crompton. He served a seven-year apprenticeship with Sir Charles Barry, the architect of the Houses of Parliament and Manchester Art Gallery. He returned to Oldham in 1847 and founded the architectural practice of A H Stott and Sons, and was known for his innovative structural engineering. His brother Joseph Stott started his career here before leaving to start his own practice. After his retirement, the practice was renamed Stott and Sons. Three of his 9 children worked in the practice. [1]

Philip Sydney Stott

Dee Mill, Shaw,1907, P.S.Stott Dee Mill - Shaw.jpg
Dee Mill, Shaw,1907, P.S.Stott

Philip Sydney Stott (Sydney Stott) was the third son of A H Stott. He is regarded as Oldham's greatest architect. He established his own practice, P.S.Stott, in 1883. He was known as Sydney Stott until 1920, but adopted the title Sir Philip Stott on being made a baronet. He benefitted from the innovations made by his father and Edward Potts, another Oldham architect. His first mill design was for Chadderton Mill in 1885. Sydney designed 22 mills in Oldham and 55 elsewhere in Lancashire. His last design was the Maple No 2 in 1915. The mills accounted for 44% of the increase in the spinning capacity of the county between 1887 and 1925, and for 40% of the new spindles laid down in Oldham between 1887 and 1914. His mills accounted for 9 million spindles. He relied on the triple brick arches supported on steel beams favoured by George Stott, rather than concrete.

Stott was a Conservative and a freemason, he was president of the Oldham Lyceum and played rugby for Oldham Football Club. He held several directorships in the cotton-spinning industry. He moved to Stanton Court, Gloucestershire (near Broadway, Worcestershire), in 1913, where he became a Justice of the Peace and, in 1925, High Sheriff of Gloucester. He died in 1937. [1]

James Stott

James was a younger brother of Abraham Henthorn Stott, the son of James Stott. He set up a heating, ventilation, and catering equipment business that trades as Stotts of Oldham. [3]

Abraham Stott and Son

Osborne Mills, Chadderton. No. 1 to the rear was by A H Stott (1873), extended (1891, 1900), No. 2 was by P S Stott (1912) both closed 1968. Osborne Mills, Chadderton 695142-by-Chris-Allen.jpg
Osborne Mills, Chadderton. No. 1 to the rear was by A H Stott (1873), extended (1891, 1900), No. 2 was by P S Stott (1912) both closed 1968.

Abraham Stott and Son, set up by Abraham Stott, a cousin of Abraham Henthorn Stott, was a cotton-spinning company operating Osborne mill. Abraham Stott had a reputation for fairness and was nicknamed 'Honest Abe'. He invested in a clipper ship that traded with the confederate forces during the cotton famine; it was captured by the Union forces. [4]

Related Research Articles

<span class="mw-page-title-main">Royton</span> Town in Greater Manchester

Royton is a town in the Metropolitan Borough of Oldham, Greater Manchester, England, with a population of 21,284 in 2011. Close to the source of the River Irk, near undulating land at the foothills of the South Pennines, it is 1.7 miles (2.7 km) northwest of Oldham, 3.2 miles (5.1 km) southeast of Rochdale and 7.6 miles (12.2 km) northeast of Manchester.

Sir Philip Sidney Stott, 1st Baronet, usually known by his full name or as Sidney Stott, was an English architect, civil engineer and surveyor.

<span class="mw-page-title-main">Trent Mill</span> Cotton mill in Greater Manchester, England

Trent Mill was a cotton spinning mill on Duchess Street in Shaw and Crompton, Greater Manchester, England. It was built by F.W. Dixon & Son in 1908. It closed and was taken over by the Lancashire Cotton Corporation in 1929 reopened in 1938 and closed again in 1962, and was demolished in 1967.

<span class="mw-page-title-main">Rutland Mill</span> Cotton mill in Greater Manchester, England

Rutland Mill was a cotton spinning mill on Linney Lane, in Shaw and Crompton, Greater Manchester, England. It was built by F. W. Dixon & Son in 1907 for the Rutland Mill Co. Ltd. It was taken over by the Lancashire Cotton Corporation in 1935. By 1964, it was in the Courtaulds Group. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods who demolished it and replaced it with a new automated storage warehouse.

<span class="mw-page-title-main">Hawk Mill, Shaw</span> Cotton mill in Greater Manchester, England

Hawk Mill, Shaw was a cotton spinning mill in Shaw, Oldham, Greater Manchester. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1931 and passed to Courtaulds in 1964. The mill closed in 1967, and was demolished in 1991.

<span class="mw-page-title-main">Ace Mill, Hollinwood</span>

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

<span class="mw-page-title-main">Dawn Mill, Shaw</span> Cotton mill in Greater Manchester, England

Dawn Mill, Shaw was a cotton spinning mill in Shaw and Crompton, Oldham, Greater Manchester. It was built on the site of Shaw Mill at the "dawn" of the 20th century. Dawn Mill was equipped with mule weft spindles in 1950. It was powered by Engines named Venus and Mars, 1800 hp twin tandem compound engine by George Saxon of Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was sold again and used by distribution company DTS Logistics for storing and distributing clothing. It was demolished in 2006 to make way for an Asda supermarket.

<span class="mw-page-title-main">Royton Ring Mill, Royton</span> Cotton mill in Greater Manchester, England

Royton Ring Mill was a cotton mill in Royton, Greater Manchester, England. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

<span class="mw-page-title-main">Kent Mill, Chadderton</span>

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 for the Kent Mill Co. It was taken over by the Lancashire Cotton Corporation in 1938 and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

<span class="mw-page-title-main">Manor Mill, Chadderton</span> Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

<span class="mw-page-title-main">Heron Mill, Hollinwood</span> Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

<span class="mw-page-title-main">Newby Mill, Shaw</span> Cotton mill in Greater Manchester, England

Elm Mill, was a four-storey cotton spinning mill in Shaw and Crompton, Greater Manchester, England. It was built in 1890 for the Elm Spinning Company Ltd., and was called Elm Mill until it closed in 1928. It was revived by the Lancashire Cotton Corporation in 1929 and called Newby Mill. LCC and all their assets passed to Courtaulds in 1964. Production at Newby finished in 1970, and it was used for warehousing. Subsequently, named Shaw No 3 Mill, it became part of Littlewood's Shaw National Distribution Centre. It was demolished to make way for housing in 2022.

<span class="mw-page-title-main">Laurel Mill, Middleton Junction</span> Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

<span class="mw-page-title-main">Junction Mill, Middleton Junction</span> Cotton mill in Greater Manchester, England

Junction Mill, Middleton Junction is a cotton spinning mill at Middleton junction, Chadderton in Greater Manchester alongside the Rochdale Canal.

<span class="mw-page-title-main">Mars Mill, Castleton</span> Cotton mill in Greater Manchester, England

Mars Mill was a former cotton spinning mill in Castleton, Rochdale, Greater Manchester, England. Castleton joined the Borough of Rochdale in 1899. Queensway, Castleton was a hub of cotton mills; Mars, Marland, and Castleton Mill were a group of three. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964 and demolished in the 1990s; Marland survived until 2004.

<span class="mw-page-title-main">Stott and Sons</span>

Stott and Sons was an architectural practice in Lancashire between 1847 and 1931. It specialised in cotton mills, designing 191 buildings of which 130 were mills or buildings related to the cotton industry. Abraham Henthorn Stott was born on 25 April 1822 in the parish of Crompton. He served a seven-year apprenticeship with Sir Charles Barry, the architect of the Houses of Parliament and Manchester Art Gallery. Abraham returned to Oldham in 1847 and founded the architectural practice of A H Stott. It was known for his innovative structural engineering. His brother Joseph Stott in 1866 started his career here before leaving to start his own practice. Three of his nine children worked in the practice. Jesse Ainsworth Stott became the senior partner. Philip Sydney Stott spent three years in the practice before starting his own. After Abraham's retirement his practice was renamed Stott and Sons.

<span class="mw-page-title-main">Newton Heath and Moston tram stop</span> Manchester Metrolink tram stop

Newton Heath and Moston is a Manchester Metrolink tram stop on the Oldham and Rochdale Line (ORL), in the Newton Heath area of Manchester, England.

<span class="mw-page-title-main">Mills Hill</span> Human settlement in England

Mills Hill is an industrial and residential area that lies on the common border of Middleton and Chadderton in Greater Manchester, England. It lies 1.3 miles east of Middleton town centre and 1.4 miles to the west of central Chadderton. It is contiguous with Middleton Junction, Moorclose, Firwood Park and Chadderton Park. Mills Hill lies along the course of the Rochdale Canal and the River Irk.

References

Notes

  1. 1 2 3 4 "Stott Architectural Practices". The National Archives. Retrieved 27 January 2009.
  2. Historic England, "Manor Mill (1244330)", National Heritage List for England , retrieved 6 January 2014
  3. Holden 2005 , p. 50
  4. Stott

Bibliography