This article needs additional citations for verification .(January 2013) |
.280 Ackley Improved | |
---|---|
Type | Rifle |
Place of origin | United States |
Production history | |
Designer | P.O. Ackley |
Manufacturer | Nosler |
Specifications | |
Parent case | .280 Remington |
Case type | Rimmed, bottleneck |
Bullet diameter | .284 in (7.2 mm) |
Neck diameter | .315 in (8.0 mm) |
Shoulder diameter | .454 in (11.5 mm) |
Base diameter | .471 in (12.0 mm) |
Rim diameter | .473 in (12.0 mm) |
Case length | 2.525 in (64.1 mm) |
Overall length | 3.330 in (84.6 mm) |
Rifling twist | 1-9 |
Primer type | large rifle |
Maximum pressure (SAAMI) | 65,000 psi (448 MPa) |
The .280 Ackley Improved (.280 AI) was the result of the .280 Remington case modification by P.O Ackley, who pushed out the sidewalls at the shoulder to near parallel and steepened the shoulder angle to 40 degrees in order to increase powder capacity, thus along with increasing the allowable pressure, resulted in increasing the bullet initial velocity by approximately 100 fps. [1] [2]
In 1957 Remington introduced the .280 Remington, which was based on the .30-06 Springfield case necked down to 7mm. The cartridge was intended to compete with the .30-06 and the .270 Winchester.
Although the .280 Remington is considered to be a very balanced cartridge combining the best attributes of both cartridges due to the high ballistic coefficient and sectional density characteristic of 7mm calibers, it did not reach the popularity achieved by the .30-06 and .270 Win.
The famous wildcatter P.O Ackley worked on the .280 Remington case in order to add it to the line of "Ackley Improved" cartridges and named it the .280 Ackley Improved 40 degrees. By 2008, Nosler standardized it and SAAMI accepted it. Ever since, the .280 Ackley Improved has earned great popularity in the US market. [3] Several different companies manufacture rifles chambered in .280 AI, including the Ruger M77 Hawkeye, Savage 110, Browning X-Bolt and Weatherby Mark V.
The .280 AI is basically the .280 Remington redesigned by steepening its case shoulder and straightening the sidewalls to near parallel, thus resulting in an increased powder capacity giving 100 fps greater muzzle velocity, comparable to the 7mm Remington Magnum.
The differences between the .280 Remington and the .280 Ackley improved are minimal.
A .280 Remington cartridge fired from a rifle chambered in .280 Ackley Improved will result in a case formed for the latter, which may be used for reloading. [3]
Loaded with a 150 grain bullet, the .280 AI shot from a 24" barrel gives a muzzle velocity of approximately 3,060 fps, which is about 100 fps faster than a .280 Remington loaded with a bullet of similar weight. Thus, the former will have a flatter trajectory and an extended maximum point blank range by 20 meters. [1]
A 150 grain bullet shot from a .280 AI generates a muzzle velocity similar to the .270 Winchester firing a 130 grain bullet. Being a heavier projectile, the .280 AI carries slightly more energy than the 130 grain bullet while maintaining the same trajectory and maximum point blank range. If both cartridges are fired with bullets of the same weight, the .280 AI has a flatter trajectory but the .270 Win offers a higher ballistic coefficient and sectional density.
According to Nosler reloading data, although the 7mm Remington Magnum does not provide more than 50 fps over the .280 AI with similar projectiles, the latter cartridge holds less powder in its case, thus it is considered more efficient. However, the published data is provided from a .280 AI tested with a 26" barrel rifle, while the 7mm Rem Mag was tested with a 24" barrel, which suggests that the velocity advantage should increase in favor of the 7mm Remington Magnum if both cartridges were tested from rifles with similar barrel lengths, and especially from reloads. [4] An advantage to the 280 AI vs 7mm RM is an additional round capacity in typical internal rifle magazines with a minor penalty in performance and reduced recoil. [1]
For practical purposes, the .280 Ackley Improved is similar to the .270 Winchester, 30-06 Springfield and .280 Remingon. In other words, energy and maximum point blank range for this line of cartridges is similar, making them suitable for mid size big game such as white tail deer and Dall ram. With the correct bullets, any of these cartridges is suitable for larger game such as elk and red stag.
The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar, but not identical, to the 7.62×51mm NATO cartridge.
A wildcat cartridge, often shortened to wildcat, is a custom-made cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created as experimental variants to optimize a certain ballistic performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.
The .243 Winchester (6×52mm) is a popular sporting rifle cartridge. Developed as a versatile short action cartridge to hunt both medium game and small game alike, it "took whitetail hunting by storm" when introduced in 1955, and remains one of the most popular whitetail deer cartridges. It is also commonly used for harvesting blacktail deer, pronghorns and mule deer with heavier rounds, and is equally suited to varmint hunting with lighter rounds. The .243 is based on a necked down .308 Winchester, introduced only three years earlier. Expanding monolithic copper bullets of approximately 80 to 85 grains or traditional lead rounds of 90 to 105 grains with controlled expansion designs are best suited for hunting medium game, while lighter rounds are intended for varmints.
The .270 Winchester is a rifle cartridge developed by Winchester Repeating Arms Company in 1923, and it was unveiled in 1925 as a chambering for their bolt-action Model 54 to become arguably the flattest shooting cartridge of its day, only competing with the .300 Holland & Holland Magnum, also introduced in the same year.
The .25-06 Remington was a wildcat cartridge for nearly half a century before being standardized by Remington in 1969.
The 7mm-08 Remington is a rifle cartridge that is almost a direct copy of a wildcat cartridge developed around 1958 known as the 7mm/308. As these names would suggest, it is the .308 Winchester case necked down to accept 7 mm (.284) bullets with a small increase in case length. Of cartridges based upon the .308, it is the second most popular behind only the .243 Winchester. However, the .308 is more popular than both. In 1980, the Remington Arms company popularized the cartridge by applying its own name and offering it as a chambering for their Model 788 and Model 700 rifles, along with a limited-run series within their Model 7600 pump-action rifles during the early 2000s.
The .375 H&H Magnum, also known as .375 Holland & Holland Magnum, is a medium-bore rifle cartridge introduced in 1912 by London based gunmaker Holland & Holland. The .375 H&H cartridge featured a belt to ensure the correct headspace, which otherwise might be unreliable, given the narrow shoulder of the cartridge case. The cartridge was designed to use cordite which was made in long strands – hence the tapered shape of the case, which, as a beneficial side effect also helped in smooth chambering and extraction from a rifle's breech.
The .300 Winchester Magnum is a belted, bottlenecked magnum rifle cartridge that was introduced by the Winchester Repeating Arms Company in 1963. The .300 Winchester Magnum is a magnum cartridge designed to fit in a standard rifle action. It is based on the .375 H&H Magnum, which has been blown out, shortened, and necked down to accept a .30 caliber (7.62 mm) bullet.
The .444 Marlin (10.9×57mmR) is a rifle cartridge designed in 1964 by Marlin Firearms and Remington Arms. It was designed to fill the gap left when the older .45-70 cartridge was not available in new lever-action rifles; at the time it was the largest lever-action cartridge available. The .444 resembles a lengthened .44 Magnum and provides a significant increase in velocity. It is usually used in the Marlin 444 lever-action rifle. Currently, Marlin, now owned by Ruger Firearms, does not offer the .444 chambering in any of their rifles. It remains to be seen if they will bring the chambering back into production.
The .280 Remington, also known as the 7mm-06 Remington and 7mm Express Remington, was introduced in 1957 for the Remington model 740, 760, 721, and 725 rifles.
The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum. The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum.
The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.
The .264 Winchester Magnum is a belted, bottlenecked rifle cartridge. Except for the .244 H&H Magnum and .257 Weatherby Magnum, it is the smallest caliber factory cartridge derived from the 2.85 in (72 mm) Holland & Holland belted magnum case. It was introduced in the late 1950s and early 1960s with the .338 Winchester Magnum and the .458 Winchester Magnum as one of a family of short-cased 2.5 in (64 mm) belted magnum cartridges developed by Winchester based on the .375 Holland & Holland parent case. It was officially introduced to the public by Winchester in 1959. After many years of dwindling use it began enjoying a mild resurgence in popularity in the mid-2000s among long range rifle enthusiasts and reloaders due to the high ballistic coefficient of the heavier 6.5mm bullets and increasing popularity of cartridges such as 6.5mm Creedmoor, .260 Remington, 6.5 Grendel, benchrest and wildcat cartridges in 6.5mm.
The .257 Roberts, also known as .257 Bob, is a medium-powered .25 caliber rifle cartridge. It has been described as the best compromise between the low recoil and flat trajectory of smaller calibers such as the 5 mm and 6 mm, and has more energy, but is harder recoiling, similar to larger hunting calibers, such as the 7 mm and 7.62 mm.
The .270 Weatherby Magnum was the first belted magnum based on the .300 H&H Magnum to be developed by Roy Weatherby in 1943. The cartridge is short enough to function in standard-length long actions with a brass length of 2.549" or 64.74mm and an overall length of about 3.295".
The .375 Ruger (9.5×65.5mm) is a rimless, standard-length rifle cartridge designed for hunting large, dangerous game. It is designed to provide an increase in performance over the .375 H&H cartridge within the context of a standard-length rifle action. The cartridge was designed in partnership by Hornady and Ruger. In 2007, it was released commercially and chambered in the Ruger Hawkeye African and the Ruger Hawkeye Alaskan rifles.
The 270 Winchester Short Magnum or 270 WSM is a short magnum cartridge created by necking down the .300 Winchester Short Magnum and fitting it with a .277 caliber bullet. The correct name for the cartridge, as listed by the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI), is 270 WSM, without a decimal point. It is a member of the Winchester Short Magnum family of cartridges.
Parker Otto Ackley was an American gunsmith, barrel maker, author, columnist, and wildcat cartridge developer. The Ackley Improved family of wildcat cartridges are designed to be easily made by rechambering existing firearms, and fireforming the ammunition to decrease body taper and increase shoulder angle, resulting in a higher case capacity. Ackley improved not only standard cartridges, but also other popular wildcats, and was the first to create a .17 caliber (4.5 mm) centerfire cartridge.
.30-06 Springfield wildcat cartridges are cartridges developed from a 30-06 Springfield "parent cartridge" through narrowing or widening the cartridge neck to fit a smaller or larger bullet in an attempt to improve performance in specific areas. Such wildcat cartridges are not standardized with recognized small arms standardization bodies like the SAAMI and the CIP.
Nosler produces six different rebated rim hunting cartridges. The first to be introduced was .26 Nosler, followed by .28 Nosler, .30 Nosler, .33 Nosler, .22 Nosler, and .27 Nosler.