.400 Whelen

Last updated
.400 Whelen
400 Whelen sketch spec.png
Type Rifle
Place of origin United States
Production history
DesignerTownsend Whelen
Designedearly 1920s
Specifications
Parent case .30-06 Springfield
Ballistic performance
Bullet mass/typeVelocityEnergy
300 gr (19 g) SP2,300 ft/s (700 m/s)3,522 ft⋅lbf (4,775 J)
350 gr (23 g) 2,100 ft/s (640 m/s)3,430 ft⋅lbf (4,650 J)
Source(s): 350gr - Barnes [1]

The .400 Whelen cartridge was developed by Colonel Townsend Whelen while he was commanding officer of Frankford Arsenal in the early 1920s. [2] The cartridge resembles a .30-06 Springfield case necked up to .40 caliber to accept bullets manufactured for the .405 Winchester.

Contents

Design

Colonel Whelen asserted the very small remaining portion of the .30-06's 17° 30 angled shoulder was likely to cause potentially dangerous headspace difficulties. [3] The headspace issue has been widely discussed. Frankford Arsenal machine shop foreman James Howe necked down cylindrical brass available in the arsenal manufacturing process to form cartridges with a .458-inch-diameter (11.6 mm) shoulder to fit the chamber of his rifles. Experimenters had less success forming cartridges by enlarging the necks of .30-06 cartridges with .441-inch-diameter (11.2 mm) (or smaller) shoulders, [4] but could form brass from .35 Whelen cases. [5]

Quality Cartridge has manufactured unformed, cylindrical empty brass cases headstamped for this cartridge. [6]

Performance

Griffin & Howe chambered custom-built rifles for this cartridge; and using neck resizing with cases carefully fire formed to the chamber in which the loaded cartridges were to be used, these rifles were reportedly very effective for killing elk, moose, and bear at ranges up to 400 yards (370 m). [3]

See also

Related Research Articles

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">.32-20 Winchester</span> American rimmed rifle/pistol cartridge

The .32-20 Winchester, also known as .32 WCF , was the first small-game lever-action cartridge that Winchester produced. It was initially introduced as a black-powder cartridge in 1882 for small-game, varmint hunting, and deer. Colt produced a single-action revolver chambered for this cartridge a few years later.

<span class="mw-page-title-main">.460 Weatherby Magnum</span> Rifle cartridge

The .460 Weatherby Magnum is a belted, bottlenecked rifle cartridge, developed by Roy Weatherby in 1957. The cartridge is based on the .378 Weatherby Magnum necked up to accept the .458-inch (11.6 mm) bullet. The original .378 Weatherby Magnum parent case was inspired by the .416 Rigby. The .460 Weatherby Magnum was designed as an African dangerous game rifle cartridge for the hunting of heavy, thick skinned dangerous game.

<span class="mw-page-title-main">Wildcat cartridge</span> Custom cartridge for firearms

A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.

A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.

<span class="mw-page-title-main">.25-06 Remington</span> US hunting rifle cartridge

Considered by many as the most balanced of the "quarter bores" for hunting medium-sized game, the .25-06 Remington remained in obscurity as a wildcat cartridge for nearly half a century before being standardized by Remington in 1969.

<span class="mw-page-title-main">.257 Weatherby Magnum</span> Rifle cartridge

The .257 Weatherby Magnum is a .257 caliber (6.53 mm) belted bottlenecked cartridge. It is one of the original standard length magnums developed by shortening the .375 H&H Magnum case to approx. 2.5 in (64 mm). Of the cartridges developed by Roy Weatherby, the .257 Weatherby Magnum was known to have been his favorite, and the cartridge currently ranks third in Weatherby cartridge sales, after the .30-378 Weatherby Magnum and the .300 Weatherby Magnum.

<span class="mw-page-title-main">6mm PPC</span> Rifle cartridge

The 6mm PPC, or 6 PPC as it is more often called, is a centerfire rifle cartridge used almost exclusively for benchrest shooting. It is one of the most accurate cartridges available at distances of up to 300 meters. This cartridge's accuracy is produced by a combination of its stout posture, being only 31 mm (1.22 in) long, and aggressive shoulder angle of 30 degrees. Its primary use has been benchrest shooting matches since the 1980s.

<span class="mw-page-title-main">.30-378 Weatherby Magnum</span> Rifle cartridge

The .30-378 Weatherby Magnum is a .30 caliber, belted, bottle-necked rifle cartridge. The cartridge was developed in response to a US Army military contract in 1959. While still unreleased to the public, the cartridge went on to set world records for accuracy including the first ten 10X in 1,000 yards (910 m) benchrest shooting. It is currently the highest velocity .30 caliber factory ammunition available.

<span class="mw-page-title-main">.35 Whelen</span> US medium-bore rifle cartridge

The .35 Whelen is a powerful medium-bore rifle cartridge that does not require a magnum action or a magnum bolt-face. The parent of this cartridge is the .30-06 Springfield, which is necked-up to accept a bullet diameter of .358 in (9.1 mm). This cartridge is more powerful than its parent, especially in killing power on large game. However, with much wider availability, and the higher BC .30 caliber bullets of today, the power gap between the two cartridges has been decreased.

The .300 Remington Ultra Magnum, also known as the .300 Ultra Mag, 7.62×72mm or .300 RUM, is a 7.62 mm rifle cartridge introduced by Remington Arms in 1999. The .300 Remington Ultra Magnum is one of the largest commercially available .30 caliber magnums currently being produced. It is a beltless, rebated rim cartridge, capable of handling all large North American game, as well as long-range shooting. Among commercially produced .30-caliber rifle chamberings, the .300 Remington Ultra Magnum is second only to the .30-378 Weatherby Magnum in cartridge-case capacity.

The .260 Remington cartridge was introduced by Remington in 1997. Many wildcat cartridges based on the .308 Winchester case had existed for years before Remington standardized this round.

<span class="mw-page-title-main">.416 Remington Magnum</span> Rifle cartridge

The .416 Remington Magnum is a .416 caliber (10.57 mm) cartridge of belted bottlenecked design. The cartridge was intended as a dangerous game hunting cartridge and released to the public in 1989. The cartridge uses the case of the 8 mm Remington Magnum as a parent cartridge. When the cartridge was released in 1988, author Frank C. Barnes considered the .416 Remington Magnum to be the "most outstanding factory cartridge introduced in decades".

The delta L problem refers to certain firearm chambers and the incompatibility of some ammunition made for that chamber. ΔL is a Commission Internationale Permanente (C.I.P.) geometric dimensioning and tolerancing definition for cartridge cases that are longer than the chamber they have to fit in. "Delta L" essentially means "difference in length".

Townsend Whelen, called "Townie" by his friends, was an American hunter, soldier, writer, outdoorsman and rifleman.

<span class="mw-page-title-main">.30-06 Springfield wildcat cartridges</span> Non-standard rifle cartridge

.30-06 Springfield wildcat cartridges are cartridges developed from a 30-06 Springfield "parent cartridge" through narrowing or widening the cartridge neck to fit a smaller or larger bullet in an attempt to improve performance in specific areas. Such wildcat cartridges are not standardized with recognized small arms standardization bodies like the SAAMI and the CIP.

The 6.5-06 A-Square is a centerfire rifle cartridge that originated as a wildcat, based on the popular .30-06 Springfield. A-Square standardized the dimensions of the cartridge and submitted them to SAAMI in 1997.

<span class="mw-page-title-main">Ned H. Roberts</span>

Major Ned H. Roberts, was an American hunter, competition target shooter, gun writer & editor, ballistician and firearms experimenter. Roberts was a prolific contributor to sporting publications, including Outdoor Life, Outers, Arms and the Man (later renamed as American Rifleman, and to Hunting and Fishing magazine, for which latter publication he served as Firearms Editor. His work on cartridge design in collaboration with Adolph Otto Niedner, Franklin Weston Mann, Townsend Whelen, and F.J. Sage led to a commercialized version of his own original .25-caliber wildcat cartridge introduced by Remington in 1934 and named the .257 Roberts.

References

  1. Barnes, Frank C. (1997) [1965]. McPherson, M.L. (ed.). Cartridges of the World (8th ed.). DBI Books. p.  190. ISBN   0-87349-178-5.
  2. Donnelly, John J. (1987). The Handloader's Manual of Cartridge Conversions . Stoeger Publishing. p.  529. ISBN   978-0-88317-269-8.
  3. 1 2 Sharpe, Philip B. Complete Guide To Handloading (1953) Funk & Wagnalls pp.206&398
  4. "Smashing the Headspace Myth". Michael Petrov. Archived from the original on 2010-12-03. Retrieved 2010-08-05.
  5. Howell, Ken (1995). Designing and Forming Custom Cartridges. Precision Shooting. p. 326. ISBN   0-9643623-0-9.
  6. "Catalog" (PDF). qual-cart.com - Quality Cartridge. Archived from the original (PDF) on 2010-09-26. Retrieved 2010-08-06.