.30 Super Carry | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Pistol | |||||||||||
Place of origin | United States | |||||||||||
Production history | ||||||||||||
Designer | Federal Premium Ammunition | |||||||||||
Designed | 2022 | |||||||||||
Specifications | ||||||||||||
Case type | Rimless, tapered | |||||||||||
Bullet diameter | 0.312 in (7.925 mm) | |||||||||||
Land diameter | 0.303 in (7.70 mm) | |||||||||||
Neck diameter | 0.337 in (8.56 mm) | |||||||||||
Shoulder diameter | 0.338 in (8.59 mm) | |||||||||||
Base diameter | 0.342 in (8.70 mm) | |||||||||||
Rim diameter | 0.344 in (8.74 mm) | |||||||||||
Rim thickness | 0.050 in (1.27 mm) | |||||||||||
Case length | 0.827 in (21.0 mm) | |||||||||||
Overall length | 1.169 in (29.7 mm) | |||||||||||
Maximum pressure | 50,000 psi (340 MPa) | |||||||||||
Ballistic performance | ||||||||||||
| ||||||||||||
Test barrel length: 4 inches Source(s): Federal Premium, Gun University [1] [2] |
.30 Super Carry, also known as .30 SC, is a rimless tapered pistol cartridge introduced by Federal Premium in early 2022. [3]
It was designed for comparable performance to a standard 9×19mm Luger in a .312 caliber configuration and typically exceeds performance of the .380 ACP when utilized in semi-automatic handguns of similar size. Its smaller dimension is conducive to reconsidering existing handgun designs for greater capacity without increasing physical magazine size or decreasing cartridge performance below the perceived adequacy associated with long established alternatives. [1]
David M. Fortier and Michelle Hamilton of Firearms News magazine noted the similarity to the 1918 vintage .30-18 Auto and 7.65x20mm Long cartridge when given an opportunity to test it prior to the 30 Super Carry's official introduction. [4] Fortier pointed this out to JJ Reich, the Senior Media Relations Manager for Federal Premium. Ian McCollum of Forgotten Weapons also noted .30 Super Carry is nearly identical to the older 7.65mm French Long round, although the creators at Federal did not seem to be aware of this and created it independently. [5]
The round when initially released by Federal was loaded for 45,000 psi (310 MPa). [6] The maximum average pressure rating for this cartridge is 52,000 psi (360 MPa). [7]
Among the first pistols chambered in .30 Super Carry were the Smith & Wesson Shield EZ 30 SC and the Shield Plus 30 SC. [8]
In May 2023, Hi-Point released the Hi-Point 3095 carbine chambered in .30 SC. [9]
The .38 Special, also commonly known as .38 S&W Special, .38 Smith & Wesson Special, .38 Spl, .38 Spc, or 9×29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson.
The .40 S&W (10.2×22mm) is a rimless pistol cartridge developed jointly by American firearms manufacturers Smith & Wesson and Winchester in 1990. The .40 S&W was developed as a law enforcement cartridge designed to duplicate performance of the Federal Bureau of Investigation's (FBI) reduced-velocity 10mm Auto cartridge which could be retrofitted into medium-frame semi-automatic handguns. It uses 0.40-inch-diameter (10 mm) bullets ranging in weight from 105 to 200 grains.
The .45 ACP, also known as .45 Auto, .45 Automatic, or 11.43×23mm is a rimless straight-walled handgun cartridge designed by John Moses Browning in 1904, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt's M1911 pistol. The round was developed due to a lack of stopping power experienced in the Moro Rebellion in places like Sulu. The issued ammunition, .38 Long Colt, had proved inadequate, motivating the search for a better cartridge. This experience and the Thompson–LaGarde Tests of 1904 led the Army and the Cavalry to decide that a minimum of .45 caliber was required in a new handgun cartridge.
The .357 SIG is a bottlenecked rimless centrefire handgun cartridge developed by the Swiss-German firearms manufacturer SIG Sauer, in cooperation with ammunition manufacturer Federal Premium. The cartridge is used by a number of law enforcement agencies.
The .357 Smith & Wesson Magnum, .357 S&W Magnum, .357 Magnum, or 9×33mmR is a smokeless powder cartridge with a 0.357 in (9.07 mm) bullet diameter. It was created by Elmer Keith, Phillip B. Sharpe, and Douglas B. Wesson of firearm manufacturers Smith & Wesson and Winchester. The .357 Magnum cartridge is notable for its highly effective terminal ballistics.
The 9×19mm Parabellum is a rimless, centerfire, tapered firearms cartridge.
.32 ACP is a centerfire pistol cartridge. It is a semi-rimmed, straight-walled cartridge developed by firearms designer John Browning, initially for use in the FN M1900 semi-automatic pistol. It was introduced in 1899 by Fabrique Nationale, and is also known as the 7.65 mm Browning Short.
The .38 Super, also known as .38 Super Auto, .38 Super Automatic, .38 Super Automatic +P , .38 Super +P , or 9×23mmSR, is a pistol cartridge that fires a 0.356-inch-diameter (9.04 mm) bullet. It was introduced in the late 1920s as a higher pressure loading of the .38 ACP, also known as .38 Auto. The older .38 ACP cartridge propels a 130-grain (8.4 g) bullet at 1,050 ft/s (320.0 m/s), whereas the .38 Super pushes the same bullet at 1,280 ft/s (390.1 m/s). The .38 Super has gained distinction as the caliber of choice for many top practical shooting competitors; it remains one of the dominant calibers in IPSC competition.
The 10mm Auto is a powerful and versatile semi-automatic pistol cartridge introduced in 1983. Its design was adopted and later produced by ammunition manufacturer FFV Norma AB of Åmotfors, Sweden.
The Hi-Point carbine is a series of pistol-caliber carbines manufactured by Hi-Point Firearms chambered for 9×19mm Parabellum, .40 S&W, 10mm Auto, .45 ACP, .380 ACP and .30 Super Carry handgun cartridges. They are inexpensive as they are constructed using polymers and alloyed metals resulting in a reduction of production costs and sale price. It functions via a simple direct blowback action.
Hi-Point Firearms, also known as Strassell's Machine, Inc, is an American firearms manufacturer based in Mansfield, Ohio. All of their firearms are manufactured in several different locations in Ohio.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
The .32 H&R Magnum, also known as the .32 Magnum, is a rimmed cartridge designed for use in revolvers. It was developed and introduced in 1984 as a joint venture between Harrington & Richardson and Federal Premium Ammunition.
Overpressure ammunition, commonly designated as +P or +P+, is small arms ammunition that has been loaded to produce a higher internal pressure when fired than is standard for ammunition of its caliber, but less than the pressures generated by a proof round. This is done typically to produce ammunition with higher muzzle velocity, muzzle energy, and stopping power, such as ammunition used for security, defensive, or hunting purposes. Because of this, +P ammunition is typically found in handgun calibers which might be used for paramilitary forces, armed security, and defensive purposes.
The .325 Winchester Short Magnum, commonly known as the 325 WSM, is an 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge. The cartridge was introduced by Winchester Ammunition in 2005.
The .327 Federal Magnum is a cartridge introduced by Federal Premium Ammunition and also sold by Sturm, Ruger & Co. It is intended to provide the power of a .357 Magnum in six-shot, compact revolvers, whose cylinders would otherwise only hold five rounds. The .327 has also been used in full-sized revolvers with a capacity of seven rounds or more. The .327 Federal Mag is an example of a "super magnum", because it is a magnum of a magnum, the .32 H&R Magnum.
The FN 5.7×28mm is a small-caliber, high-velocity, smokeless-powder, rebated, non-tapered, bottleneck, centerfire cartridge designed for pistols and personal defense weapons (PDW) uses, manufactured by FN Herstal. It is similar in length to the .22 WMR and .22 Hornet. Unlike many new cartridges, it has no parent case; the complete package was developed from scratch by FN.
The 7.65×21mm Parabellum is a pistol cartridge that was introduced in 1898 by German arms manufacturer Deutsche Waffen- und Munitionsfabriken (DWM) for their new Pistol Parabellum. The primary developers of the pistol cartridge were firearms designers Georg Luger and Hugo Borchardt, who developed the round from the earlier 7.65×25mm Borchardt while working at DWM.