62M | |
---|---|
General information | |
Location | 62 MacDonald Ave Winnipeg, Manitoba, Canada |
Town or city | Winnipeg |
Country | Canada |
Completed | 2018 |
Design and construction | |
Architecture firm | 5468796 Architecture |
Other information | |
Number of units | 41 |
62M is a 41-unit condominium building in Winnipeg, Manitoba, Canada, built by 5468796 Architecture. [1] [2] [3]
Named after its street address, 62 MacDonald Avenue, [4] the three-storey, circular structure sits on 12-metre (39 ft) high concrete columns and hovers next to the Disraeli Freeway at the edge of downtown Winnipeg and the Red River. [5] [6]
Completed in 2018, the building has 40 identical trapezoid units and a glass penthouse on top of the structural core, each unit starts at approximately 3 m (10 ft) wide around the entrance (located adjacent to the structural core) and 6 m (20 ft) towards the exterior, featuring 6-meter-tall windows. [7]
Due to the building's circular shape that rise over the city skyline, the development has been unofficially nicknamed the "UFO" and the "flying saucer" by locals. [2] [4] [6] [8]
Located on the edge of downtown Winnipeg and the Red River, the building is situated between the Disraeli Freeway and the back of neighbouring properties. [5] [6]
The building site—a leftover bit of industrial ground next to the freeway—was originally considered an undesirable location to build because of its restricted views, industrial nature, and its isolated location with a lack of street frontage. [2] [4] To overcome this, 5468796 partners Johanna Hurme, Sasa Radulovic, and Colin Neufeld came up with the idea of raising the building off of the ground so that it was higher than the surrounding buildings. [9]
After raising it, their budget became much more restricted. To help with cost efficiency, they gave the building a circular form as it could encompass the same area using 30% less building materials than a rectangular form. [9]
Project 62M can be considered as a project based on redefining budget prioritization during the design process. This would be achieved through the use of “cheaper alternatives” [10] such as material, site location, decoration, etc.
Quoting the architect, "This leads to an innate frugality of our interventions, shaving off the excess in order to create projects that do not depend on extraneous or decorative elements." [10]
The shape of the building originated from addressing two different design challenges: site location and budget size. [8] The site's location is between industrial buildings and the base of an elevated freeway, limiting the building view and free space. [8]
The first step to address the site location was by elevating the building to provide daylight access and a better view of the city. However, this solution created a conflict with the budget creating the second challenge during the design process. The designers explored different solutions to keep the new design within the budget. This solution was the circular shape that would use "30 per cent less exterior envelope than rectilinear shapes would need." [8] This solution didn't just solve the cost efficiency but also provided a panoramic view through six meters of floor-to-ceiling glass. [8]
However, to make this work, it needed to be discussed with traders and contractors involved in the project to give a green light into building it. After the designer brought to light that it shouldn't be any different from making it in the ground, the idea of prefabrication was the best option for a budget-friendly construction. [8]
Forty identical pie-shaped units were prefabricated by the contractors to be put together at the top of a concrete core. Inside this concrete core was found the staircase and elevator to the building. [8]
The material palette of the building consists of raw concrete (left raw to minimize maintenance costs), weathering steel, wood, and glass. [11] The materials used during the design and construction of Project 62M are:
Materials |
---|
Cast-in-place concrete |
Weathering steel |
Weathering glass |
These rustic materials are what give a contrast between the interior against the exterior facades and were also a more cost efficient option. [2]
The circular form of the 62M structure is cost-effective by reducing the elevation cost of the building and "providing a narrow circumference/area dedicated to communal corridors and the widest possible perimeter for suite windows in order to optimize construction costs." [2]
Furthermore, the architects decided that using a pre-fabricated structure would be the best budget-friendly solution to reduce construction time. [2] The raw touches of the pre-fabricated building would be used as part of the interior decoration to save even more in future maintenance costs that the building would end up needing (aside from simplifying the construction process). [2]
The building is set upon twenty 11-meter (35 ft) tall precast concrete columns, each placed between radially arranged parking spots underneath the building. [11] The center of the building is constructed using cast in place concrete that houses stairs, an elevator, and a maintenance shaft; this is considered the structural core of the building. [12] The circular form of the building was designed to offset the costs of having the building raised, the building could be built with 30 percent less materials than if it were a square or rectangle. [11]
The building has 40 identical trapezoid units and a glass penthouse on top of the structural core, each unit starts at approximately 10 feet wide around the entrance (located adjacent to the structural core) and 20 feet wide towards the exterior featuring 6 meter tall windows. [7] The units are arranged with the utility areas (such as laundry, maintenance, bathroom, and kitchen) located closest to the entrance. While the core and the open living areas (such as bedroom, living room, and dining room) are located nearest to the window to best utilize the 360 degree window perimeter of the building. [12]
Each unit is approximately 610 square feet (57 square meters), and has a narrow perimeter dedicated to communal corridors and a larger perimeter dedicated to windows. [11] Each of the units was built offsite as a prefabricated wall and floor sections each in the trapezoidal shape of the apartment it would be; the window system was also prefabricated and developed offsite. [11]
The building is divided into units for sale and units for rent; units for sale are approximately $200,000 to $260,000 depending on the view, and units for rent are approximately $1,150 to $1,600 depending on the furnishings and the view. [7]
Habitat 67, or simply Habitat, is a housing complex at Cité du Havre, on the Saint Lawrence River, Montreal, Quebec, Canada, designed by Israeli-Canadian architect Moshe Safdie. It originated in his master's thesis at the School of Architecture at McGill University and then an amended version was built for Expo 67, a World's Fair held from April to October 1967. Its address is 2600 Avenue Pierre-Dupuy, next to the Marc-Drouin Quay. Habitat 67 is considered an architectural landmark and a recognized building in Montreal.
The Shanghai World Financial Center is a supertall skyscraper located in the Pudong district of Shanghai. It was designed by Kohn Pedersen Fox and developed by the Mori Building Company, with Leslie E. Robertson Associates as its structural engineer and China State Construction Engineering Corp and Shanghai Construction (Group) General Co. as its main contractor. It is a mixed-use skyscraper, consisting of offices, hotels, conference rooms, observation decks, and ground-floor shopping malls. Park Hyatt Shanghai is the tower's hotel component, comprising 174 rooms and suites occupying the 79th to the 93rd floors, which at the time of completion was the highest hotel in the world. It is now the third-highest hotel in the world after the Ritz-Carlton, Hong Kong, which occupies floors 102 to 118 of the International Commerce Centre.
The Trump International Hotel and Tower is a skyscraper condo-hotel in downtown Chicago, Illinois. The building, named for Donald Trump, was designed by architect Adrian Smith of Skidmore, Owings and Merrill. Bovis Lend Lease built the 100-story structure, which reaches a height of 1,388 feet (423.2 m) including its spire, its roof topping out at 1,171 feet (357 m). It is next to the main branch of the Chicago River, with a view of the entry to Lake Michigan beyond a series of bridges over the river. The building received publicity when the winner of the first season of The Apprentice reality television show, Bill Rancic, chose to manage the construction of the tower over managing a Rancho Palos Verdes based "Trump National Golf Course & Resort" in the Los Angeles metro area.
The Trump International Hotel and Tower, originally the Gulf and Western Building, is a high-rise building at 15 Columbus Circle and 1 Central Park West on the Upper West Side of Manhattan, New York City. It was originally designed by Thomas E. Stanley as an office building and completed in 1970 as the headquarters of Gulf and Western Industries. In the mid-1990s, a joint venture composed of the General Electric Pension Fund, Galbreath Company, and developer Donald Trump renovated the building into a hotel and residential tower. The renovation was designed by Philip Johnson and Costas Kondylis.
Olympic Tower is a 51-story, 620 ft-tall (190 m) building at 641 and 645 Fifth Avenue, between 51st and 52nd Streets, in the Midtown Manhattan neighborhood of New York City. Designed by Skidmore, Owings & Merrill (SOM), the mixed-use development contains condominium apartments, office space, and retail shops. The tower is named after Olympic Airways, whose president Aristotle Onassis jointly developed the tower with the Arlen Realty and Development Corporation between 1971 and 1974. It was the first skyscraper to be constructed within a special zoning district to encourage retail and mixed-use development along Fifth Avenue.
Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and maneuvered into place; examples include precast beams, and wall panels for tilt up construction. In contrast, cast-in-place concrete is poured into site-specific forms and cured on site.
301 Mission Street is a high-rise residential building in the South of Market district of downtown San Francisco. A mixed-use, primarily residential high rise, it is the tallest residential building and the 6th-tallest overall in San Francisco. In May 2016, residents were informed the main tower was both sinking and tilting, resulting in several lawsuits concerning repair costs and whether the tilt had been withheld from buyers. The building is being modified in an effort to stop its sinking.
In structural engineering, the tube is a system where, to resist lateral loads, a building is designed to act like a hollow cylinder, cantilevered perpendicular to the ground. This system was introduced by Fazlur Rahman Khan while at the architectural firm Skidmore, Owings & Merrill (SOM), in their Chicago office. The first example of the tube's use is the 43-story Khan-designed DeWitt-Chestnut Apartment Building, since renamed Plaza on DeWitt, in Chicago, Illinois, finished in 1966.
The Murano is a residential skyscraper in Center City Philadelphia. Part of a condominium boom occurring in the city, the Murano was announced in 2005 and was developed jointly by Thomas Properties Group and P&A Associates. The building, named after Murano, Italy, was completed in 2008 at a cost of US$165 million. The site, previously occupied by a parking lot, was the location of the Erlanger Theatre from 1927 to 1978.
53 West 53 is a supertall skyscraper at 53 West 53rd Street in the Midtown Manhattan neighborhood of New York City, adjacent to the Museum of Modern Art (MoMA). It was developed by the real estate companies Pontiac Land Group and Hines. With a height of 1,050 ft (320 m), 53 West 53 is the tenth-tallest completed building in the city as of November 2019.
The Richards Medical Research Laboratories, located on the campus of the University of Pennsylvania in Philadelphia, were designed by architect Louis Kahn and are considered to have been a breakthrough in his career. The building is configured as a group of laboratory towers with a central service tower. Brick shafts on the periphery hold stairwells and air ducts, producing an effect reminiscent of the ancient Italian towers that Kahn had painted several years earlier.
The Grande at Santa Fe Place is a high-rise residential building in San Diego, California, United States composed of two towers of equal height. The 39-story towers have a height of 420 feet (130 m) and are a prominent fixture in San Diego's skyline. Located in the Core district of Downtown San Diego, The Grande at Santa Fe Place was designed by the architect firm Perkins & Company Architecture and Urban Design Inc. The towers are currently tied with Vantage Pointe Condominium as the tenth-tallest buildings in San Diego.
100 Eleventh Avenue is a 23-story residential tower at the intersection of 19th Street and Eleventh Avenue in the borough of Manhattan, New York City, New York. The building is described as "a vision machine" by the architect Jean Nouvel. It has one of the most technologically advanced curtain wall systems in New York City, but also refers to West Chelsea masonry industrial architectural traditions.
Ideal Lofts is an architecturally noted low-rise soft loft condominium apartment building in Toronto, Ontario, Canada. It is located at Markham Street and College Street in the downtown neighbourhoods of Little Italy and Trinity–Bellwoods. The project was developed by Context and designed by Peter Clewes, Prishram Jain and Robert Cadeau of architectsAlliance. Cecconi Simone and Crayon Design designed the interiors. The building was registered on August 19, 2002.
Central Park Tower is a residential supertall skyscraper at 225 West 57th Street in the Midtown Manhattan neighborhood of New York City, along Billionaires' Row. Designed by Adrian Smith + Gordon Gill Architecture, the building rises 1,550 feet (472.4 m) with 98 above-ground stories and three basement stories, although the top story is numbered 136. Central Park Tower is the second-tallest building in New York City, the United States, and the Western Hemisphere; the 15th tallest building in the world; the tallest primarily residential building in the world; and the tallest building outside Asia by roof height.
The St. Regis Chicago, formerly Wanda Vista Tower, is a 101-story, 1,198 ft (365 m) supertall skyscraper in Chicago, Illinois. Construction started in August 2016, and was completed in 2020. Upon completion it became the city's third-tallest building at 1,198 ft (365 m), surpassing the Aon Center. It is the tallest structure in the world designed by a woman. It forms a part of the Lakeshore East development and overlooks the Chicago River near Lake Michigan.
One Bennett Park is a skyscraper at 451 East Grand Avenue, in the Streeterville neighborhood of Chicago. The project was first announced as the building at 451 E. Grand Ave. in July 2014, approved in December 2014, and named One Bennett Park in October 2015. The building is named for Edward H. Bennett, the Chicago architect and urban planner who coauthored the 1909 Plan of Chicago. The building topped-out in late 2018, and later opened in the spring of 2019. It is among Chicago's tallest skyscrapers.
MIRA is a 39-story, 422-foot (129 m) residential skyscraper under construction at 280 Spear Street in San Francisco, California.
One High Line is a pair of buildings in New York City designed by architectural firm BIG. The complex will include 247 condominiums, a 137-room Six Senses hotel, 90,000 square feet (8,400 m2) of retail space, art space, a spa and club.
Johanna Hurme is a co-founding and managing partner of the Winnipeg-based studio, 5468796 Architecture, which she leads with Sasa Radulovic and Colin Neufeld. Through her leadership the practice strives to address architectural and civic issues—from city building to contemporary habitation - through inventive solutions engaging design and collaborative experiences to create outstanding architecture irrespective of budget.
{{cite web}}
: CS1 maint: numeric names: authors list (link){{cite web}}
: CS1 maint: numeric names: authors list (link)