83-foot patrol boat

Last updated
CGC-624.jpg
The 83-foot CGC-624 (later USCG-14) in 1942
Class overview
Name83-foot patrol boat
BuildersWheeler Shipyard, Brooklyn, New York
OperatorsFlag of the United States Coast Guard.svg  United States Coast Guard
Preceded by400-series patrol boat [1]
Succeeded by Cape-class and Point-class cutters
Completed230
Preserved2
General characteristics [2]
Class and typePatrol boat
Displacement76 tons fully loaded
Length83 ft (25 m)
Beam16 ft (4.9 m)
Height64 in (1,600 mm)
Installed powerTwin Sterling Viking II gasoline engines [3]
Propulsiontwin propellers
Speed20 kt

The United States Coast Guard wooden-hulled 83-foot patrol boats (also called cutters) were all built by Wheeler Shipyard in Brooklyn, New York during World War II. The first 136 cutters were fitted with a tapered-roof Everdur silicon bronze wheelhouse but due to a growing scarcity of that metal during the war, the later units were fitted with a flat-roofed plywood wheelhouse. [4] A total of 230 83-footers were built and entered service with the Coast Guard during the war. Twelve other 83-footers were built for the Navy and were transferred to Latin American navies. [5]

Contents

The patrol boats were powered by two 600-horsepower "Viking 2nd" Model TCG-8 inline eight-cylinder gasoline engines manufactured by the Sterling Engine Company. Their combined fuel economy was poor: 100 gallons per hour at a cruising speed of 12 knots, 120 gallons per hour at full throttle. [6]

The class was followed by Cape-class 95-foot patrol boat (or cutter) and 82-foot Point-class cutter.

Two of the cutters still survive. One, D-Day veteran CG-83366, is undergoing restoration to serve as a museum. The other, CG-83527, was a public attraction in the Seattle area from 2004-2016 [7] and is now used as a home by its new owner.

Rescue Flotilla One

USCG-20 and USCG-21 off Normandy USCG-20 and USCG-21.jpg
USCG-20 and USCG-21 off Normandy

Sixty of the 83-foot cutters were sent to England to serve as rescue craft off each of the landing beaches during the Invasion of Normandy. [5] Officially called Rescue Flotilla One (ResFlo One), the cutters were nicknamed the "Matchbox Fleet" because their wood construction and large gasoline tanks made them potential tinderboxes. [3]

Renumbered USCG-1 through USCG-60, they were able to pull almost 500 men from the water on D-Day. The thirty cutters assigned to the American sector saved 194 men off shore from Omaha Beach and 157 near Utah Beach. [8] Arriving off the invasion beaches at 5:30 AM, the cutter USCG-16 alone rescued 126 men that day. [9] The thirty cutters assigned to the British and Canadian sectors saved 133 men from the water off Gold, Juno and Sword Beaches. [8]

No cutters were lost to enemy fire, but USCG-27 and USCG-47 foundered along the Normandy Coast during a storm on June 21, 1944. [10] Operating from June through December 1944, the cutter flotilla saved 1438 lives. [9]

CGC 83525

RADM Marshall Greer, USN, accepts the surrender of 2nd Lt Kinichi Yamada aboard CGC 83525 Aguigan Surrender 83525.jpg
RADM Marshall Greer, USN, accepts the surrender of 2nd Lt Kinichi Yamada aboard CGC 83525

CGC 83525 has the honor of being the only US Coast Guard cutter to host an official surrender ceremony. On 4 September 1945, CGC 83525 transported US Navy RADM Marshall R. Greer to Aguigan Island in the Marianas to accept the surrender of the Japanese garrison that held the island from 2nd Lt Kinichi Yamada, two days after the Surrender of Japan aboard USS Missouri. [11]

Decommissioned after the war, CGC 83525 would be sold off after the war to a civilian owner, eventually being abandoned in the Sacramento Delta. Parts of the vessel were salvaged during a clean up effort of the Delta in 2011 and donated to Coast Guard Station Rio Vista for use as a memorial. [12] [13]

CG-83366

In September 2018, a surviving 83-foot patrol boat, civilian name Tiburon (formerly CG-83366, built in 1942 [14] ) was purchased by a Seattle couple for $100 from another private owner who had converted it to a motor yacht. The previous owner had become unable to keep it afloat due to health issues, and the boat eventually sank at its moorings on Lake Union. It was refloated, and its poor condition resulted in its cheap price. It is the only remaining member of Rescue Flotilla One, and served off Normandy in June 1944 under the simplified hull number USCG-11.

The couple began restoring CG-83366, and for the 75th anniversary of the Invasion of Normandy (D-Day) in June 2019, it was on display on Lake Union near the Center for Wooden Boats and the Museum of History & Industry. [15] While moored in Seattle, CG-83366 had also been the site of crew reunions for D-Day celebrations in 2006 and 2007. [16] [17] The cutter is about halfway through a major restoration and preservation effort to return it to its WWII-era condition and appearance. Future plans are to operate CG-83366 as a living history exhibit in the Puget Sound area as well as static display museum ship on the Lake Union waterfront between cruises. Various components being used in the restoration have come from the other surviving 83-footer, CG-83527, itself a former living history exhibit in Puget Sound, before it was sold for use as a house boat in the waterways around Everett.

See also

Related Research Articles

<span class="mw-page-title-main">United States Coast Guard</span> Maritime law enforcement and rescue service branch of the U.S. military

The United States Coast Guard (USCG) is the maritime security, search and rescue, and law enforcement service branch of the United States Armed Forces and one of the country's eight uniformed services. The service is a maritime, military, multi-mission service unique among the United States military branches for having a maritime law enforcement mission with jurisdiction in both domestic and international waters and a federal regulatory agency mission as part of its duties. It is the largest coast guard in the world, rivaling the capabilities and size of most navies.

USCGC <i>Healy</i> Icebreaker of the US Coast Guard

USCGC Healy (WAGB-20) is the United States' largest and most technologically advanced icebreaker as well as the US Coast Guard's largest vessel. She is classified as a medium icebreaker by the Coast Guard. She is homeported in Seattle, Washington, and was commissioned in 1999. On 6 September 2001 Healy visited the North Pole for the first time. The second visit occurred on 12 September 2005. On 5 September 2015, Healy became the first unaccompanied United States surface vessel to reach the North Pole, and Healy's fourth Pole visit happened on 30 September 2022.

<span class="mw-page-title-main">United States Coast Guard Auxiliary</span> Volunteer auxiliary service of the United States Coast Guard

The United States Coast Guard Auxiliary is the uniformed, non-military volunteer component of the United States Coast Guard. Congress established the unit on 23 June 1939, as the United States Coast Guard Reserve. On February 19, 1941, the entity was renamed the United States Coast Guard Auxiliary. The Auxiliary's purpose is to bolster all USCG undertakings both at sea and in the sky, with the exception of tasks necessitating "direct" law enforcement or military actions. As of 2022, the U.S. Coast Guard Auxiliary boasted around 21,000 members.

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 3 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as the Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m), it is similar to, but larger than, the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 66 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces Southwest Asia.

USCGC <i>Onondaga</i>

USCGC Onondaga (WPG-79), a United States Coast Guard cutter, was built by Defoe Boat Works in Bay City, Michigan, commissioned on 11 September 1934. From its commissioning until 1941, Onondaga was stationed at Astoria, Oregon, where she performed important law enforcement duties and rendered much assistance to ships in distress. Each year she patrolled the annual pelagic seal migration to the Pribilof Islands, and she attempted to prevent out of season halibut fishing.

<span class="mw-page-title-main">Aguiguan</span> Island in the Northern Marianas island chain

Aguiguan, alternatively called Goat Island, is a small bean-shaped uninhabited coralline island in the Northern Mariana Islands chain in the Pacific Ocean. It is situated 8 kilometers (5.0 mi) south-west of Tinian, from which it is separated by the Tinian Channel. Aguiguan and neighboring Tinian Island together form Tinian Municipality, one of the four main political divisions that comprise the Northern Marianas. The island is inhabited by wild goats and the last known habitat of a rare Pacific bat, as well as many species of birds. During WW2 a Japanese garrison was on the island, which surrendered at the end of the War without a battle. Access to the island is inhibited by the lack of a natural harbor.

USCGC <i>Escanaba</i> (WPG-77)

The USCGC Escanaba (WPG-77) was a 165 ft (50 m) "A" type United States Coast Guard cutter stationed on the Great Lakes from her commissioning in 1932 until the start of U.S. military involvement in World War II in 1941. With the outbreak of war, Escanaba redeployed to participate in the Battle of the Atlantic, during the course of which she was ultimately lost with nearly all hands. Struck by either a torpedo or mine in the early morning of 13 June 1943, while serving as a convoy escort, Escanaba suffered a fiery explosion and sank within minutes, leaving only two survivors and one body out of her 105-man crew to be found on the surface by rescuers.

The history of the United States Coast Guard goes back to the United States Revenue Cutter Service, which was founded on 4 August 1790 as part of the Department of the Treasury. The Revenue Cutter Service and the United States Life-Saving Service were merged to become the Coast Guard per 14 U.S.C. § 1 which states: "The Coast Guard as established January 28, 1915, shall be a military service and a branch of the armed forces of the United States at all times." In 1939 the United States Lighthouse Service was merged into the Coast Guard. The Coast Guard itself was moved to the Department of Transportation in 1967, and on 1 March 2003 it became part of the Department of Homeland Security. However, under 14 U.S.C. § 3 as amended by section 211 of the Coast Guard and Maritime Transportation Act of 2006, upon the declaration of war and when Congress so directs in the declaration, or when the President directs, the Coast Guard operates as a service in the Department of the Navy.

<span class="mw-page-title-main">United States Coast Guard Yard</span> United States historic place

The United States Coast Guard Yard or just Coast Guard Yard is a United States Coast Guard operated shipyard located on Curtis Bay in northern Anne Arundel County, Maryland, just south of the Baltimore city limits. It is the Department of Homeland Security's largest industrial facility. It is a division of the Coast Guard's Surface Forces Logistics Center command. It is the Coast Guard's sole shipbuilding and major repair facility, and part of the Coast Guard's core industrial base and fleet support operations. Engineering, logistics, and maintenance responsibilities and complete life-cycle support; installation, operations, maintenance and ultimately replacement. Its annual budget is $100 million.

<span class="mw-page-title-main">United States naval districts</span> Regions and Districts of the U.S. Navy and U.S. Coast Guard

United States Naval Districts is a system created by the United States Navy to organize military facilities, numbered sequentially by geographic region, for the operational and administrative control of naval bases and shore commands in the United States and around the world. Established in 1903, naval districts became the foundational system for organizing U.S. naval forces ashore during the 20th century. The term "Naval" forces includes United States Marine Corps and current United States Coast Guard units.

USCGC <i>Fir</i> (WLM-212) Lighthouse tender

The United States Coast Guard Cutter Fir was the last lighthouse tender built specifically for the United States Lighthouse Service to resupply lighthouses and lightships, and to service buoys. Fir was built by the Moore Drydock Company in Oakland, California in 1939. On 22 March 1939, the U.S. Lighthouse Tender Fir was launched. She was steam driven with twin screws, 175 feet (53 m) in length, had a beam of 32 feet (9.8 m), drew 11 feet 3 inches (3.43 m) of water, and displaced 885 tons. Fir was fitted with a reinforced bow and stern, and an ice-belt at her water-line for icebreaking. She was built with classic lines and her spaces were lavishly appointed with mahogany, teak, and brass. The crew did intricate ropework throughout the ship. The cost to build Fir was approximately US$390,000. Fir's homeport was Seattle, Washington for all but one of her fifty one years of service when she was temporarily assigned to Long Beach, California when USCGC Walnut was decommissioned on 1 July 1982.

Point-class cutter Class of patrol boats

The Point-class cutter was a class of 82-foot patrol vessels designed to replace the United States Coast Guard's aging 83-foot wooden hull patrol boat being used at the time. The design utilized a mild steel hull and an aluminum superstructure. The Coast Guard Yard discontinued building the 95-foot Cape-class cutter to have the capacity to produce the 82-foot Point-class patrol boat in 1960. They served as patrol vessels used in law enforcement and search and rescue along the coasts of the United States and the Caribbean. They also served in Vietnam during the Vietnam War. They were replaced by the 87-foot Marine Protector-class coastal patrol boats beginning in the late 1990s.

USCGC <i>Fir</i> (WLB-213)

USCGC Fir (WLB-213) is a Juniper-class cutter of the United States Coast Guard. USCGC Fir is under the Operational Control (OPCON) of the Commander of the Thirteenth Coast Guard District and is homeported in Astoria, Oregon. Fir's primary area of responsibility is the coastal waters, river bars and high seas of the Washingtonian and Oregonian coasts. USCGC Fir conducts heavy lift aids to navigation operations, law enforcement and other missions as directed.

USCGC <i>Mohawk</i> (WPG-78) U.S. Coast Guard cutter sunk as artificial reef off south-west Florida

The fifth United States Coast Guard Cutter named Mohawk (WPG-78) was built by Pusey & Jones Corp., Wilmington, Delaware, and launched 1 October 1934. She was commissioned on 19 January 1935.

<span class="mw-page-title-main">Patrol Forces Southwest Asia</span> Military unit

Patrol Forces Southwest Asia (PATFORSWA) is a United States Coast Guard command based in Manama, Bahrain. PATFORSWA was created in November 2002 as a contingency operation to support the U.S. Navy with patrol boats. The command's mission is to train, equip, deploy, and support combat-ready Coast Guard forces conducting operations in support of Operation Iraqi Freedom (OIF), Operation Enduring Freedom (OEF), Operation Inherent Resolve (OIR) in the Naval Forces Central Command's area of responsibility. It was commissioned as a permanent duty station in June 2004. In July 2003, PATFORSWA moved from its own compound to facilities at Naval Support Activity Bahrain.

<i>Active</i>-class patrol boat

The Active-class patrol boat was one of the most useful and long-lasting classes of United States Coast Guard cutters. Of the 35 built in the 1920s, 16 were still in service during the 1960s. The last to be decommissioned from active service was the Morris in 1970; the last in actual service was the Cuyahoga, which sank after an accidental collision in 1978.

USCGC <i>North Star</i>

The USCGC North Star was a United States Coast Guard Cutter during the Second World War. It was originally built for the U.S. Interior Department and served in the United States Coast Guard (USCG) before being acquired by the U.S. Navy.

75-foot patrol boat American Coast Guard patrol craft

The United States Coast Guard wooden-hulled 75-foot patrol boats were built during Prohibition to help interdict alcohol smugglers. Their nickname was derived from the slang term "six bits" meaning 75 U.S. cents.

36-foot picket boat (USCG) American Coast Guard patrol craft

The United States Coast Guard wooden-hulled 36-foot picket boats were built during Prohibition to help interdict alcohol smugglers.

References

  1. ↑ Flynn 2014, p. 14.
  2. ↑ Flynn 2014, p. 24.
  3. 1 2 "Matchbox 60 vital to success of Operation Neptune". Coast Guard News. Bright Mountain Media, Inc. June 6, 2015. Retrieved March 24, 2020.
  4. ↑ Scheina, Robert L. (1982). U.S. Coast Guard Cutters & Craft of World War II. Naval Institute Press. p. 222. ISBN   9780870217173 . Retrieved March 29, 2020.
  5. 1 2 "The U. S. Coast Guard in World War II", United States Coast Guard History Command, text accompanying photos 2002117288 and 2002120254, accessed June 10, 2019
  6. ↑ Acosta, Greg (March 22, 2019). "The World's Largest Inline Gasoline Engine Ever? The Sterling TCG-8". EngineLabs. Power Automedia. Retrieved March 24, 2020.
  7. ↑ "CG83527.org". cg83527.org. Retrieved 2023-07-27.
  8. 1 2 "The U.S. Coast Guard at D-Day: Rescue Flotilla One the "Matchbox Fleet"" (PDF). U.S. Coast Guard Historian's Office. March 13, 2019. Retrieved March 28, 2020.
  9. 1 2 "U.S. Coast Guard Rescue Flotilla One" (PDF). U.S. Coast Guard History Program. May 27, 2014. Retrieved March 24, 2020.
  10. ↑ "Casualties: U.S. Navy and Coast Guard Vessels Sunk or Damaged Beyond Repair during World War II 7 December 1941-1 October 1945". Naval History and Heritage Command. May 1, 2014. Retrieved March 25, 2020.
  11. ↑ QMCS Richter, Larry. "Japanese Surrender of Aguigan Island". uscg83footers.org. Archived from the original on 2011-07-28. Retrieved 13 December 2020.
  12. ↑ "History of the US Coast Guard". The Grace Museum. Retrieved 13 December 2020.
  13. ↑ Thompson, Ian (November 15, 2011). "World War II-era cutter parts may become Rio Vista Coast Guard monument". The Daily Republic. Retrieved 13 December 2020.
  14. ↑ Flynn 2014, p. 20.
  15. ↑ Elise Takahama (June 8, 2019). "Coast Guard cutter that survived D-Day landings being restored by King County couple". The Seattle Times .
  16. ↑ "June Dinner Program – Coast Guard Combat Operations on D-Day: A Local Living History Story" (PDF), PSMHS Newsletter, Puget Sound Maritime Historical Society, June 2007
  17. ↑ Donna Gordon Blankinship (June 6, 2006). "D-Day veteran reunited with his Coast Guard cutter 62 years after invasion". Associated Press – via Seattle Post-Intelligencer.

Sources

PD-icon.svg This article incorporates public domain material from The U. S. Coast Guard in World War II. United States Coast Guard.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.