A-Square

Last updated

A-Square
Type Limited liability
IndustryFirearms and ammunition
Founded1979;44 years ago (1979)
FounderLt. Col. Arthur B. Alphin
DefunctFebruary 15, 2012 (2012-02-15)
FateDissolved
Headquarters,

A-Square Company, LLC was a manufacturer of rifles, ammunition and bullets based in Chamberlain, South Dakota in the United States. The company was one of 19 that are members of the Sporting Arms and Ammunition Manufacturer's Institution (SAAMI). [1] [2] The company's focus was on its firearms for hunting large dangerous game. This was reflected in the selection of larger caliber chamberings in the company's rifles.

Contents

History

The company was established 1979. Lieutenant Colonel Arthur B. Alphin was the founder and chief designer for the A-Square Company. [3] Besides the company location in Chamberlain, South Dakota, the company had a location in Bedford, Kentucky. [4] By August 2008 Alphin planned to move his ammunition factory to Butte, Montana. [5]

A-Square manufactured rifles usually came with stainless steel barrels as a standard feature. The barrels on the rifles use epoxy resin to bed the barrel to the stocks. Magazine boxes were manufactured from plate steel for rigidity and were also welded to the receiver. A-Square rifles were engineered to allow the firing pin to retract further into the bolt body than other firearms (.400 in (10.2 mm)). This increases the force of the firing pin on the cartridge within the chamber. [6]

Available calibres for A-Square firearms range from those designed for large, dangerous game including the .577 T-Rex and .416 Taylor, through smaller calibre .243 Win rifles.

A-Square held the patent 4811666 for the monolithic solid bullet. [7]

Change in controlling interest

From 2010 to February 2012 Sharps Rifle Company LLC owned an 80% controlling interest in A-Square of South Dakota LLC and 67% controlling interest in A-Square of Wyoming. [8]

Closure

In October 2011, all A-Square employees were dismissed from both the Chamberlain, South Dakota ammunition plant and the Glenrock, Wyoming rifle plant.

On February 15, 2012, the A-Square Company ceased to exist. Owner and founder Art Alphin led Sharps Rifle Company LLC, CEO Michael Blank to shut down both A-Square of South Dakota and Wyoming along with Sharps’ main operations in St. Louis.

M. Blank conveyed ownership, all of the equipment and intangible assets belonging to A-Square of South Dakota LLC and A-Square of Wyoming LLC to the new Sharps Rifle Company Inc., CEO Kevin Tierney and his partner William Martin.

Due to fiscal insolvency and a new company vision neither the ammunition plant in South Dakota nor the rifle plant in Wyoming will be reopened.

New ownership

In February 2013, Broadsword Group, LLC acquired the Sharps Rifle Co., which included the sister companies of A-Square rifles and ammunition. New ownership and a new management team is steering a different course for these companies through their headquarters in Glenrock, WY. Sharps has abandoned manufacturing A-Square bolt-action rifles, instead focusing on the AR market. The company produces the patented Relia-bolt, the Balanced Bolt Carrier, barrels, complete uppers and rifles, all dedicated to the .25-45 Sharps cartridge, which the company offers factory loadings in 87 grain soft point and 70 grain hollow point ammunition. This cartridge, based on the parent .223 in/5.56 mm case necked up for .257 bullets, is SAAMI standardized. The company offers properly headstamped virgin brass, as well as remanufactured ammunition from once-fired military 5.56 brass.

Related Research Articles

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge or a round is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for the practical purpose of convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often informally used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

<span class="mw-page-title-main">Colt AR-15</span> Semi-automatic rifle

The Colt AR-15 is a lightweight, magazine-fed, gas-operated semi-automatic rifle. It is a semi-automatic version of the M16 rifle sold for the civilian and law enforcement markets in the United States. The AR in AR-15 stands for ArmaLite rifle, after the company that developed it in the 1950s. Colt's Manufacturing Company currently owns the AR-15 trademark, which is used exclusively for its line of semi-automatic AR-15 rifles.

<span class="mw-page-title-main">Sharps Rifle Manufacturing Company</span> Defunct American firearms manufacturer

Sharps Rifle Manufacturing Company was the manufacturer of the Sharps Rifle. The company was organized by Samuel Robbins and Richard S. Lawrence as a holding company in Hartford, Connecticut, on October 9, 1851 with $100,000 in capital. Despite Sharps departing from the company bearing his name, Sharps Rifle Manufacturing Company produced over 100,000 rifles, but it dissolved in 1881 with the widespread use of repeating rifles.

<span class="mw-page-title-main">Breechloader</span> Class of gun

A breechloader is a firearm in which the user loads the ammunition via the rear (breech) end of its barrel, as opposed to a muzzleloader, which loads ammunition via the front (muzzle).

<span class="mw-page-title-main">Direct impingement</span> Type of gas operation for a firearm

Direct impingement is a type of gas operation for a firearm that utilizes gas from a fired cartridge to impart force on the bolt carrier or slide assembly to cycle the action. Firearms using direct impingement are theoretically lighter, more accurate, and less expensive than firearms using cleaner and cooler gas piston systems.

<span class="mw-page-title-main">.22 Long Rifle</span> Common ammunition cartridge

The .22 Long Rifle or simply .22 LR or 22 is a long-established variety of .22 caliber rimfire ammunition originating from the United States. It is used in a wide range of rifles, pistols, revolvers, shotguns, and submachine guns.

<span class="mw-page-title-main">Magazine (firearms)</span> Ammunition feeding device of a firearm

A magazine, or simply called mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun or externally attached. The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip", although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into a magazine or cylinder.

Blowback is a system of operation for self-loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gas created by the ignition of the propellant charge.

<span class="mw-page-title-main">Accurizing</span> Process of improving the accuracy and precision of a gun

Accurizing is the process of improving the accuracy and precision of a gun.

<span class="mw-page-title-main">Gas-operated reloading</span> System of operation used to provide energy to operate autoloading firearms

Gas-operation is a system of operation used to provide energy to operate locked breech, autoloading firearms. In gas-operation, a portion of high-pressure gas from the cartridge being fired is used to power a mechanism to dispose of the spent case and insert a new cartridge into the chamber. Energy from the gas is harnessed through either a port in the barrel or a trap at the muzzle. This high-pressure gas impinges on a surface such as a piston head to provide motion for unlocking of the action, extraction of the spent case, ejection, cocking of the hammer or striker, chambering of a fresh cartridge, and locking of the action.

Marlin Firearms Co. is an American manufacturer of semi-automatic, lever-action, and bolt-action rifles. In the past, the company, now based in Madison, North Carolina, and formerly based in North Haven, Connecticut, made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

The .260 Remington cartridge was introduced by Remington in 1997. Many wildcat cartridges based on the .308 Winchester case had existed for years before Remington standardized this round.

The following are terms related to firearms and ammunition topics.

<span class="mw-page-title-main">.458 Lott</span> Cartridge

The .458 Lott is a .458 caliber rifle cartridge designed for the purpose of hunting large, thick-skinned dangerous game animals in Africa. It is based on the full length .375 H&H Magnum case blown out and shortened to 2.800 inches (71.1 mm).

The .416 Taylor is a rifle cartridge. According to Ken Waters in Pet Loads, it was created by Robert Chatfield-Taylor in the early 1970s, with the first rifle in this caliber being a factory barreled Winchester Model 70. The case is based on the .458 Winchester Magnum necked down to accept .416 caliber bullets.

<span class="mw-page-title-main">.30-06 Springfield wildcat cartridges</span> Non-standard rifle cartridge

.30-06 Springfield wildcat cartridges are cartridges developed from a 30-06 Springfield "parent cartridge" through narrowing or widening the cartridge neck to fit a smaller or larger bullet in an attempt to improve performance in specific areas. Such wildcat cartridges are not standardized with recognized small arms standardization bodies like the SAAMI and the CIP.

<span class="mw-page-title-main">.300 AAC Blackout</span> Rifle cartridge originally designed for use in the M4 carbine

The .300 AAC Blackout, also known as 7.62×35mm, is an intermediate cartridge developed in the United States by Advanced Armament Corporation (AAC) for use in the M4 carbine. The cartridge yields increased performance in shorter barrels and effective subsonic performance for silencer use when compared to 5.56mm NATO. The .300 AAC Blackout uses standard 5.56mm NATO magazines and components with the exception of the barrel.

<span class="mw-page-title-main">6mm ARC</span> American rifle cartridge by Hornady

The 6mm Advanced Rifle Cartridge (6×38mm), or 6mm ARC for short, is a 6 mm (.243) caliber intermediate rifle cartridge introduced by Hornady in 2020, as a low-recoil, high-accuracy long-range cartridge, designed for use in the AR-15 platform at request of a specialized group within the U.S. DoD for its multipurpose combat rifle program.

<span class="mw-page-title-main">Repeating firearm</span> Firearms that can be discharged multiple times after a single ammunition reload

A repeating firearm or repeater is any firearm that is capable of being fired repeatedly before having to manually reloaded with new ammunition into the weapon.

References

  1. "SAAMI Membership, company website, accessed 28th April 2009". Archived from the original on November 26, 2007. Retrieved April 28, 2009.
  2. SAAMI Member Companies Website, accessed 28th April 2009 Archived April 20, 2009, at the Wayback Machine
  3. "SAAMI Membership, company website". Archived from the original on November 25, 2007. Retrieved September 27, 2018.
  4. "Company website". Archived from the original on November 26, 2007. Retrieved April 28, 2009.
  5. Holly Michels, The Montana Standard, August 29, 2007 Ammo maker plans move to Butte Archived April 7, 2018, at the Wayback Machine
  6. Walter, John (March 25, 2006). Rifles of the World. Iola, Wisconsin: Krause Publications. p. 45. ISBN   0-89689-241-7.
  7. U.S. Patent 4,811,666
  8. "A-Square's Alphin charged with obtaining grant by false pretenses". The Glenrock Bird. Vol. 4, no. 28. February 20, 2011.