AB magnitude

Last updated November 21, 2024

The AB magnitude system is an astronomical magnitude system. Unlike many other magnitude systems, it is based on flux measurements that are calibrated in absolute units, namely spectral flux densities.

Definition

The monochromatic AB magnitude is defined as the logarithm of a spectral flux density with the usual scaling of astronomical magnitudes and a zero-point of about 3631 janskys (symbol Jy),^[1] where 1 Jy = 10⁻²⁶ W Hz⁻¹ m⁻² = 10⁻²³ erg s⁻¹ Hz⁻¹ cm⁻² ("about" because the true definition of the zero point is based on magnitudes as shown below). If the spectral flux density is denoted $f ν$ , the monochromatic AB magnitude is:

m_{\text{AB}}\approx -2.5\log _{10}\left({\frac {f_{\nu }}{3\,631{\text{ Jy}}}}\right),

or, with $f ν$ still in janskys,

m_{\text{AB}}=-2.5\log _{10}f_{\nu }+8.90.

The exact definition is stated relative to the cgs units of erg s⁻¹ cm⁻² Hz⁻¹:

m_{\text{AB}}=-2.5\log _{10}f_{\nu }-48.60.

Note: there is a sign error in the original Oke & Gunn (1983) equation.

Inverting this leads to the true definition of the numerical value "3631 Jy" often cited:

f_{\nu ,0}=10^{\tfrac {48.60}{-2.5}}\approx 3.631\times 10^{-20}

erg s⁻¹ cm⁻² Hz⁻¹

Actual measurements are always made across some continuous range of wavelengths. The bandpass AB magnitude is defined so that the zero point corresponds to a bandpass-averaged spectral flux density of about 3631 Jy:

m_{\text{AB}}\approx -2.5\log _{10}\left({\frac {\int f_{\nu }{(h\nu )}^{-1}e(\nu )\,\mathrm {d} \nu }{\int 3\,631{\text{ Jy}}\,{(h\nu )}^{-1}e(\nu )\,\mathrm {d} \nu }}\right),

where $e (ν)$ is the "equal-energy" filter response function and the $(hν) -1$ term assumes that the detector is a photon-counting device such as a CCD or photomultiplier.^[2] (Filter responses are sometimes expressed as quantum efficiencies, that is, in terms of their response per photon, rather than per unit energy. In those cases the $(hν) -1$ term has been folded into the definition of $e (ν)$ and should not be included.)

The STMAG system is similarly defined, but for constant flux per unit wavelength interval instead.

AB stands for "absolute" in the sense that no relative reference object is used (unlike using Vega as a baseline object).^[3] This must not be confused with absolute magnitude in the sense of the apparent brightness of an object if seen from a distance of 10 parsecs.

Expression in terms of $f λ$

In some fields, spectral flux densities are expressed per unit wavelength, $f λ$ , rather than per unit frequency, $f ν$ . At any specific wavelength,

f_{\nu }={\frac {\lambda ^{2}}{c}}f_{\lambda },

where $f ν$ is measured per frequency (say, in hertz), and $f λ$ is measured per wavelength (say, in centimeters). If the wavelength unit is ångströms,

{\frac {f_{\nu }}{\text{Jy}}}=3.34\times 10^{4}\left({\frac {\lambda }{\mathrm {\AA} {}}}\right)^{2}{\frac {f_{\lambda }}{{\text{erg}}{\text{ cm}}^{-2}{\text{ s}}^{-1}\mathrm {\AA} ^{-1}}}.

This can then be plugged into the equations above.

The "pivot wavelength" of a given bandpass is the value of $λ$ that makes the above conversion exact for observations made in that bandpass. For an equal-energy response function as defined above, it is ^[4]

\lambda _{\text{piv}}={\sqrt {\frac {\int e(\lambda )\lambda \,\mathrm {d} \lambda }{\int e(\lambda )\lambda ^{-1}\,\mathrm {d} \lambda }}}.

For a response function expressed in the quantum-efficiency convention, it is:

\lambda _{\text{piv}}={\sqrt {\frac {\int e(\lambda )\,\mathrm {d} \lambda }{\int e(\lambda )\lambda ^{-2}\,\mathrm {d} \lambda }}}.

Conversion from other magnitude systems

Magnitudes in the AB system can be converted to other systems. However, because all magnitude systems involve integration of some assumed source spectrum over some assumed passband, such conversions are not necessarily trivial to calculate, and precise conversions depend on the actual bandpass of the observations in question. Various authors have computed conversions for standard situations.^[5]

Related Research Articles

In physics, optical depth or optical thickness is the natural logarithm of the ratio of incident to transmitted radiant power through a material. Thus, the larger the optical depth, the smaller the amount of transmitted radiant power through the material. Spectral optical depth or spectral optical thickness is the natural logarithm of the ratio of incident to transmitted spectral radiant power through a material. Optical depth is dimensionless, and in particular is not a length, though it is a monotonically increasing function of optical path length, and approaches zero as the path length approaches zero. The use of the term "optical density" for optical depth is discouraged.

Radiometry is a set of techniques for measuring electromagnetic radiation, including visible light. Radiometric techniques in optics characterize the distribution of the radiation's power in space, as opposed to photometric techniques, which characterize the light's interaction with the human eye. The fundamental difference between radiometry and photometry is that radiometry gives the entire optical radiation spectrum, while photometry is limited to the visible spectrum. Radiometry is distinct from quantum techniques such as photon counting.

<span class="mw-page-title-main">Reflectance</span> Capacity of an object to reflect light

The reflectance of the surface of a material is its effectiveness in reflecting radiant energy. It is the fraction of incident electromagnetic power that is reflected at the boundary. Reflectance is a component of the response of the electronic structure of the material to the electromagnetic field of light, and is in general a function of the frequency, or wavelength, of the light, its polarization, and the angle of incidence. The dependence of reflectance on the wavelength is called a reflectance spectrum or spectral reflectance curve.

The jansky is a non-SI unit of spectral flux density, or spectral irradiance, used especially in radio astronomy. It is equivalent to 10⁻²⁶ watts per square metre per hertz.

In physics, Planck's law describes the spectral density of electromagnetic radiation emitted by a black body in thermal equilibrium at a given temperature $T$ , when there is no net flow of matter or energy between the body and its environment.

The ultraviolet catastrophe, also called the Rayleigh–Jeans catastrophe, was the prediction of late 19th century and early 20th century classical physics that an ideal black body at thermal equilibrium would emit an unbounded quantity of energy as wavelength decreased into the ultraviolet range. The term "ultraviolet catastrophe" was first used in 1911 by Paul Ehrenfest, but the concept originated with the 1900 statistical derivation of the Rayleigh–Jeans law.

In physics, the Rayleigh–Jeans law is an approximation to the spectral radiance of electromagnetic radiation as a function of wavelength from a black body at a given temperature through classical arguments. For wavelength λ, it is $where is the spectral radiance, is the speed of light, is the Boltzmann constant, and is the temperature in kelvins. For frequency, the expression is instead$

Absorbance is defined as "the logarithm of the ratio of incident to transmitted radiant power through a sample ". Alternatively, for samples which scatter light, absorbance may be defined as "the negative logarithm of one minus absorptance, as measured on a uniform sample". The term is used in many technical areas to quantify the results of an experimental measurement. While the term has its origin in quantifying the absorption of light, it is often entangled with quantification of light which is "lost" to a detector system through other mechanisms. What these uses of the term tend to have in common is that they refer to a logarithm of the ratio of a quantity of light incident on a sample or material to that which is detected after the light has interacted with the sample.

In optical physics, transmittance of the surface of a material is its effectiveness in transmitting radiant energy. It is the fraction of incident electromagnetic power that is transmitted through a sample, in contrast to the transmission coefficient, which is the ratio of the transmitted to incident electric field.

In radiometry, irradiance is the radiant flux received by a surface per unit area. The SI unit of irradiance is the watt per square metre (W⋅m⁻²). The CGS unit erg per square centimetre per second (erg⋅cm⁻²⋅s⁻¹) is often used in astronomy. Irradiance is often called intensity, but this term is avoided in radiometry where such usage leads to confusion with radiant intensity. In astrophysics, irradiance is called radiant flux.

In radiometry, radiant intensity is the radiant flux emitted, reflected, transmitted or received, per unit solid angle, and spectral intensity is the radiant intensity per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. These are directional quantities. The SI unit of radiant intensity is the watt per steradian, while that of spectral intensity in frequency is the watt per steradian per hertz and that of spectral intensity in wavelength is the watt per steradian per metre —commonly the watt per steradian per nanometre. Radiant intensity is distinct from irradiance and radiant exitance, which are often called intensity in branches of physics other than radiometry. In radio-frequency engineering, radiant intensity is sometimes called radiation intensity.

In quantum mechanics, the results of the quantum particle in a box can be used to look at the equilibrium situation for a quantum ideal gas in a box which is a box containing a large number of molecules which do not interact with each other except for instantaneous thermalizing collisions. This simple model can be used to describe the classical ideal gas as well as the various quantum ideal gases such as the ideal massive Fermi gas, the ideal massive Bose gas as well as black body radiation which may be treated as a massless Bose gas, in which thermalization is usually assumed to be facilitated by the interaction of the photons with an equilibrated mass.

In probability theory and mathematical physics, a random matrix is a matrix-valued random variable—that is, a matrix in which some or all of its entries are sampled randomly from a probability distribution. Random matrix theory (RMT) is the study of properties of random matrices, often as they become large. RMT provides techniques like mean-field theory, diagrammatic methods, the cavity method, or the replica method to compute quantities like traces, spectral densities, or scalar products between eigenvectors. Many physical phenomena, such as the spectrum of nuclei of heavy atoms, the thermal conductivity of a lattice, or the emergence of quantum chaos, can be modeled mathematically as problems concerning large, random matrices.

In radiometry, radiant flux or radiant power is the radiant energy emitted, reflected, transmitted, or received per unit time, and spectral flux or spectral power is the radiant flux per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. The SI unit of radiant flux is the watt (W), one joule per second, while that of spectral flux in frequency is the watt per hertz and that of spectral flux in wavelength is the watt per metre —commonly the watt per nanometre.

In radiometry, radiant exitance or radiant emittance is the radiant flux emitted by a surface per unit area, whereas spectral exitance or spectral emittance is the radiant exitance of a surface per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. This is the emitted component of radiosity. The SI unit of radiant exitance is the watt per square metre, while that of spectral exitance in frequency is the watt per square metre per hertz (W·m⁻²·Hz⁻¹) and that of spectral exitance in wavelength is the watt per square metre per metre (W·m⁻³)—commonly the watt per square metre per nanometre. The CGS unit erg per square centimeter per second is often used in astronomy. Radiant exitance is often called "intensity" in branches of physics other than radiometry, but in radiometry this usage leads to confusion with radiant intensity.

In astronomy, the spectral index of a source is a measure of the dependence of radiative flux density on frequency. Given frequency $in Hz and radiative flux density in Jy, the spectral index is given implicitly by Note that if flux does not follow a power law in frequency, the spectral index itself is a function of frequency. Rearranging the above, we see that the spectral index is given by$

In radiometry, radiosity is the radiant flux leaving a surface per unit area, and spectral radiosity is the radiosity of a surface per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. The SI unit of radiosity is the watt per square metre, while that of spectral radiosity in frequency is the watt per square metre per hertz (W·m⁻²·Hz⁻¹) and that of spectral radiosity in wavelength is the watt per square metre per metre (W·m⁻³)—commonly the watt per square metre per nanometre. The CGS unit erg per square centimeter per second is often used in astronomy. Radiosity is often called intensity in branches of physics other than radiometry, but in radiometry this usage leads to confusion with radiant intensity.

The linear attenuation coefficient, attenuation coefficient, or narrow-beam attenuation coefficient characterizes how easily a volume of material can be penetrated by a beam of light, sound, particles, or other energy or matter. A coefficient value that is large represents a beam becoming 'attenuated' as it passes through a given medium, while a small value represents that the medium had little effect on loss. The (derived) SI unit of attenuation coefficient is the reciprocal metre (m⁻¹). Extinction coefficient is another term for this quantity, often used in meteorology and climatology. Most commonly, the quantity measures the exponential decay of intensity, that is, the value of downward e-folding distance of the original intensity as the energy of the intensity passes through a unit thickness of material, so that an attenuation coefficient of 1 m⁻¹ means that after passing through 1 metre, the radiation will be reduced by a factor of e, and for material with a coefficient of 2 m⁻¹, it will be reduced twice by e, or e². Other measures may use a different factor than e, such as the decadic attenuation coefficient below. The broad-beam attenuation coefficient counts forward-scattered radiation as transmitted rather than attenuated, and is more applicable to radiation shielding. The mass attenuation coefficient is the attenuation coefficient normalized by the density of the material.

In the study of heat transfer, absorptance of the surface of a material is its effectiveness in absorbing radiant energy. It is the ratio of the absorbed to the incident radiant power.

In radiometry, radiant exposure or fluence is the radiant energy received by a surface per unit area, or equivalently the irradiance of a surface, integrated over time of irradiation, and spectral exposure is the radiant exposure per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. The SI unit of radiant exposure is the joule per square metre, while that of spectral exposure in frequency is the joule per square metre per hertz and that of spectral exposure in wavelength is the joule per square metre per metre —commonly the joule per square metre per nanometre.

References

↑ Oke, J. B. (1983). "Secondary standard stars for absolute spectrophotometry". The Astrophysical Journal . 266: 713–717. Bibcode:1983ApJ...266..713O. doi:10.1086/160817.
↑ Tonry, J. L. (2012). "The Pan-STARRS1 Photometric System". The Astrophysical Journal . 750 (2): 99. arXiv: 1203.0297 . Bibcode:2012ApJ...750...99T. doi:10.1088/0004-637X/750/2/99. S2CID 119266289.
↑ Oke, J. B. (1974). "Absolute spectral energy distributions for white dwarfs". Astrophysical Journal Supplement Series . 236 (27): 21–25. Bibcode:1974ApJS...27...21O. doi:10.1086/190287.
↑ Tokunaga, A. T.; Vacca (April 2005). "The Mauna Kea Observatories Near-Infrared Filter Set. III. Isophotal Wavelengths and Absolute Calibration". Publications of the Astronomical Society of the Pacific. 117 (830): 421–426. arXiv: astro-ph/0502120 . Bibcode:2005PASP..117..421T. doi:10.1086/429382. S2CID 250813406.
↑ Blanton, M. R. (2007). "K-Corrections and Filter Transformations in the Ultraviolet, Optical, and Near-Infrared". The Astronomical Journal . 133 (2): 734–754. arXiv: astro-ph/0606170 . Bibcode:2007AJ....133..734B. doi:10.1086/510127. S2CID 18561804.

External links

Conversion from AB magnitudes to Johnson magnitudes

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[refAB83-1] Oke, J. B. (1983). "Secondary standard stars for absolute spectrophotometry". The Astrophysical Journal . 266: 713–717. Bibcode:1983ApJ...266..713O. doi:10.1086/160817.

[refPS-2] Tonry, J. L. (2012). "The Pan-STARRS1 Photometric System". The Astrophysical Journal . 750 (2): 99. arXiv: 1203.0297 . Bibcode:2012ApJ...750...99T. doi:10.1088/0004-637X/750/2/99. S2CID 119266289.

[refAB74-3] Oke, J. B. (1974). "Absolute spectral energy distributions for white dwarfs". Astrophysical Journal Supplement Series . 236 (27): 21–25. Bibcode:1974ApJS...27...21O. doi:10.1086/190287.

[TV05-4] Tokunaga, A. T.; Vacca (April 2005). "The Mauna Kea Observatories Near-Infrared Filter Set. III. Isophotal Wavelengths and Absolute Calibration". Publications of the Astronomical Society of the Pacific. 117 (830): 421–426. arXiv: astro-ph/0502120 . Bibcode:2005PASP..117..421T. doi:10.1086/429382. S2CID 250813406.

[refBR07-5] Blanton, M. R. (2007). "K-Corrections and Filter Transformations in the Ultraviolet, Optical, and Near-Infrared". The Astronomical Journal . 133 (2): 734–754. arXiv: astro-ph/0606170 . Bibcode:2007AJ....133..734B. doi:10.1086/510127. S2CID 18561804.

[1]

[2]

[3]

[4]

[5]