AMX 40 cruiser tank

Last updated
AMX 40
Type Cruiser tank
Place of origin France
Production history
DesignerJoseph Molinié
Designed1938-1940
Manufacturer Ateliers de construction d'Issy-les-Moulineaux
Specifications
Mass16–18 t (35,000–40,000 lb)
Length5.33 m (17 ft 6 in)
Width2.45 m (8 ft 0 in)
Height2.37 m (7 ft 9 in)
Crew3 (commander/gunner, driver, loader)

Armor 60 mm equivalent (turret front)
30-50 mm (hull sides) + 15 mm sponsons
40 mm (lower hull) sides + 15 mm side skirts
25 mm (double bottom)
Main
armament
47 mm SA35 gun (176 rounds)
Secondary
armament
7.5 mm MAC 1931 coaxial machine gun, 7.5 mm MAC 1934 anti-aircraft machine gun (4000 rounds)
Engine Aster two-stroke diesel engine
160 hp (120 kW) (4-cylinder) or 220 hp (160 kW) (6-cylinder)
TransmissionRVR automatic
Suspension Christie
Fuel capacity400 liters
Operational
range
>500 km (310 mi)
Maximum speed 45–50 km/h (28–31 mph)
Steering
system
controlled differential

The AMX 40 was a proposed French cruiser tank. It was intended to replace the SOMUA S35 and S40 tanks. The tank never went beyond design stage after the Fall of France.

Contents

Development history

In April 1939, a French military mission led by General Martin visited the British military. They were impressed by the British Cruiser Mk III and decided to make an improved cavalry tank based on it which would later be known as AMX 40. [1] [2]

After the start of World War II, development of the AMX 40 commenced in March 1940 under the leadership of Joseph Molinié from Ateliers de construction d'Issy-les-Moulineaux. The AMX 40 was a cruiser tank, planned to be a successor to the SOMUA S35 and SOMUA S40. [3] However, in July 1940, the design was discontinued after the Fall of France. [3] [4]

Design

Top view of AMX 40 AMX 40 Top View.jpg
Top view of AMX 40
Rear view of AMX 40 AMX 40 Rear View.jpg
Rear view of AMX 40
AMX 40 cutaway AMX 40 Blueprint.jpg
AMX 40 cutaway

The AMX 40 was ahead of its time in some aspects; the hull and turret were well sloped and had no straight angles. The tank was manned by a crew of 3. [3]

Hull and turret

The AMX 40 was designed to be approximately 33 cm wider than the S35 while maintaining approximately the same length, which improved its handling. Construction was entirely cast. The frontal armor had a nominal thickness of 60mm, although surviving drawings suggest that the heavily sloped upper glacis was somewhat thinner. The side armor ranged from 30mm to 50mm and the rear armor was 40mm. [3]

The two-man egg-shaped turret had two openings for the optical rangefinder. The turret ring diameter was of only 90 cm. There was a circular access hatch of 60 cm in diameter at the rear of the turret. There were no vision slits for the turret of the AMX 40. [3]

Armament

The planned main armament was a 47 mm SA35 gun. 176 rounds were stowed in the fighting compartment in rotary and tilting magazines in order to be reached quickly.

Secondary armament included two 7.5mm machine guns; one coaxial machine gun and one anti-aircraft defence machine gun mounted on a retractable ball mount behind the turret. Up to 30 magazines were stored in a large belt mechanism to the right of the driver. It was believed that this system would allow the loader to continuously grab magazines without needing to crawl around inside the hull. [3]

Engine

The AMX 40 was supposed to use a 160 hp (120 kW) two-stroke Aster diesel engine similar to the one used on the AMX 38. The choice of diesel fuel significantly increased safety by preventing ignition at room temperature. [3]

The engine horsepower was noticeably less than the SOMUA S35 (190 hp (140 kW)) and SOMUA S40 (220 hp (160 kW)), despite the fact that the tank's weight was close to the SOMUA S35. A 220 hp (160 kW), six-cylinder version of the Aster engine was under development

Running gear

The chassis had eight road wheels of 82 cm diameter, on a horizontally-sprung Christie suspension. There were no return rollers. The road wheels were protected by 15 mm steel side skirts.

Like many tanks fitted with Christie suspensions, the AMX 40 was a "convertible tank"; in the event of a broken track, [3] the crew could remove the tracks and use the two rear-wheel drives, allowing the tank to travel at high speeds on roads. In wheeled mode, the tank was steered by pivoting the two front road wheels.

Communications, optics, and crew

The AMX 40 was to be equipped with a radio. [5] Vision was achieved by a panoramic periscope located on the top of the turret. [3]

Related Research Articles

Panzer 38(t) Czechoslovak light tank used by Germany during WW2

The Panzerkampfwagen 38(t), originally known as the ČKD LT vz. 38 was a tank designed during the 1930s, which saw extensive service during World War II. Developed in Czechoslovakia by ČKD, the type was adopted by Nazi Germany following the annexation of Czechoslovakia. With the German Army and other Axis forces, the type saw service in the invasions of Poland, France and the USSR. Production ended in 1942, when its main armament was deemed inadequate. In all, over 1,400 Pz. 38(t)s were manufactured. The chassis of the Pz. 38(t) continued to be produced for the Marder III (1942–1944) with some of its components used in the later Jagdpanzer 38 (1944–1945) tank destroyer and its derivative vehicles.

Chieftain (tank) Main battle tank

The FV4201 Chieftain was the main battle tank of the United Kingdom during the 1960s-1990s.

<i>Entwicklung</i> series

The Entwicklung series, more commonly known as the E-Series, was a late-World War II attempt by Nazi Germany to produce a standardised series of tank designs. There were to be standard designs in five different weight classes from which several specialised variants were to be developed. This intended to reverse the trend of extremely complex tank designs that had resulted in poor production rates and mechanical unreliability.

AEC Armoured Car Weapon

AEC Armoured Car is the name of a series of British heavy armoured cars built by the Associated Equipment Company (AEC) during the Second World War.

T95 medium tank American prototype medium tank developed from 1955 to 1959

The T95 was an American prototype medium tank developed from 1955 to 1959. These tanks used many advanced or unusual features, such as siliceous-cored armor, new transmissions, and OPTAR fire-control systems. The OPTAR incorporated an electro-optical rangefinder and was mounted on the right side of the turret, and was used in conjunction with the APFSDS-firing 90 mm T208 smoothbore gun, which had a rigid mount without a recoil system. In addition, although the tanks were designed with a torsion beam suspension, a hydropneumatic suspension was fitted, and one of the tanks was fitted with a Solar Saturn gas turbine for demonstration purposes.

Renault R35 Light infantry tank

The Renault R35, an abbreviation of Char léger Modèle 1935 R or R 35, was a French light infantry tank of the Second World War.

SOMUA S35 French cavalry tank

The SOMUA S35 was a French cavalry tank of the Second World War. Built from 1936 until 1940 to equip the armoured divisions of the Cavalry, it was for its time a relatively agile medium-weight tank, superior in armour and armament to its French and foreign competitors, such as the contemporary versions of the German Panzer III medium tank. It was constructed from well-sloped, mainly cast, armour sections, that however made it expensive to produce and time-consuming to maintain.

The Vextra was a French armored vehicle classified as an armored reconnaissance vehicle, infantry fighting vehicle, fire support vehicle, and/or anti-tank vehicle. It is manned by a four person crew consisting of a commander, a driver, a gunner, and a loader. It was developed in the early 1990s by GIAT industries, now Nexter Systems, and was revealed in 1997.

ARL 44 Former French heavy tank

The ARL 44 was a French heavy tank, the development of which started just before the end of the Second World War. Only sixty of these tanks were ever completed, from 1949 onwards. The type proved to be unsatisfactory and was phased out in 1953.

The Char G1 was a French replacement project for the Char D2 medium tank. Several prototypes from different companies were developed from 1936 onwards, but not a single one had been fully completed at the time of the Fall of France in 1940. The projects represented some of the most advanced French tank design of the period and finally envisaged a type that would have been roughly equal in armament and mobility to later World War II standard tanks of other nations, such as the Soviet T-34 and the American M4 Sherman, but possessing several novel features, such as gun stabilisation, a semi-automatic loader and an optical rangefinder.

T29 Heavy Tank American heavy tank

The Heavy Tank T29 was an American heavy tank project started in March 1944 to counter the appearance of the German Tiger II heavy tank. The T29 was not ready in time for the war in Europe, but it did provide post-war engineers with opportunities for applying engineering concepts to artillery and automotive components.

Panhard EBR Wheeled reconnaissance vehicle, Armoured car

The Panhard E.B.R. is an armoured car designed by Panhard for the French Army and later used across the globe, notably by the French Army during the Algerian War and by the Portuguese Army during the Overseas War.

AMX-40 Main battle tank

The AMX-40 was a French main battle tank developed by GIAT during the latter stages of the Cold War as an export tank to replace the earlier AMX-32. Designed to be an inexpensive tank orientated towards militaries with smaller defence budgets, the AMX-40 featured a lightly armoured hull and good mobility reminiscent of previous French MBTs with a powerful 120 mm cannon. It however failed to attract interest and sales, rendering the project a failure, being discontinued in 1990.

AMX-50 Medium Tank/heavy tank (lowered variant)

The AMX 50 or AMX-50 was a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

OF-40 Italian main battle tank

The OF-40 is an Italian main battle tank developed as a joint venture between OTO Melara and Fiat, and intended primarily for export sales. OTO Melara would develop and produce the hulls, and automotive components would be provided by Fiat. Initial design work was started by OTO Melara in 1977, with the first prototypes ready by 1980.

Emil (tank)

Emil, also known as the Kranvagn, KRV or Emil Olsson was a tank developed secretly in Sweden during the early 1950s; Kranvagn, meaning mobile crane was a cover-name. The intention was to replace the Swedish Army's disparate tank fleet with a tank that could counter the Soviet IS series heavy tanks and be upgraded continuously. The initial design, in 1950, proposed mounting a 10.5 cm autoloader in an oscillating turret. Due to its size, weight and power to weight it was considered by many to be more of a medium tank than a heavy tank.

The AMX 38 was a prototype French tank designed in 1937 at the AMX works. Designed as AMX's response to the 20-tonne tank programme intended to replace the aging Char D2, it was a faster and heavier alternative to Renault R35, in practice a cross-over between a light tank and medium tank.

Gendron-Somua AMR 39 Type of Armoured Car

The Gendron-Somua AMR 39 was a prototype French armoured car.

The Panhard AM 40 P, also known as Model 201, was a prototype French armoured car.

Kolohousenka Wheeled/tracked light tank

Kolohousenka was a series of Czechoslovakian wheeled and tracked light tanks developed by Skoda, ČKD and Tatra.

References

  1. Joseph Molinié,Les engins blindés du monde 1917-1967, 1981, Argout Editions, pg 14-15
  2. Stéphane Ferrard,GBM n°95, 2011, pg 78-86
  3. 1 2 3 4 5 6 7 8 9 "1940 AMX 40 MEDIUM TANK" (in French). Retrieved 2020-02-28.
  4. "AMX 40 Medium Tank" . Retrieved 2020-02-28.
  5. "AMX 40" . Retrieved 2020-02-28.