AN/PEQ-2 | |
---|---|
![]() AN/PEQ-2A Aiming Light mounted on an M4 carbine | |
Place of origin | United States |
Service history | |
Used by | United States Armed Forces |
Wars | War in Afghanistan, Iraq War |
Production history | |
Manufacturer | Insight Technology |
Variants | AN/PEQ-2, AN/PEQ-2A, AN/PEQ-2B, AN/PEQ-2C [1] |
General Specifications | |
Weight | 210 g (excluding batteries and mount) |
IR Laser Specifications | |
IR Laser Class | I, IIIb |
IR Laser Output (mw) | 25 mW |
IR Laser Divergence (mrad) | 0.3 mrad |
IR Laser Wavelength (nm) | 830 nm |
IR Illuminator Specifications | |
IR Illuminator Class | IIIb |
IR Illuminator Output (mw) | 30 mW |
IR Illuminator Divergence (mrad) | 3 mrad to 10° |
IR Illuminator Wavelength (nm) | 830 nm [2] |
The AN/PEQ-2 Infrared Target Pointer/Illuminator/Aiming Light (ITPIAL) is a laser sight for use on rifles fitted with a Picatinny rail. It was manufactured by Insight Technology. [3]
The AN/PEQ-2 succeeded the AN/PAQ-4C, which was designed in the early 1990s after the Persian Gulf War. [4] It was widely used by US forces during the War in Afghanistan and the Iraq War. [5] [6] [7]
The device is still seeing active service but is being withdrawn and replaced amongst U.S. Armed Forces. It was also part of the U.S. SOPMOD kit, though the device is being replaced by the new smaller LA-5/PEQ-15. [8]
The AN/PEQ-2 has two infrared laser emitters—one narrow beam used for aiming the rifle, and one wide beam used for illuminating targets, like a flashlight. [9] The beams can only be seen through night vision goggles. [9] Each beam can be zeroed independently, and the illuminator's radius is adjustable. The two lasers are tied into one 6-mode switch, which has the following modes:
Mode | Mode's Marking | Targeting laser | IR illuminator |
---|---|---|---|
0 | OFF | off | off |
1 | AIM LO | low power | off |
2 | AIM HI | high power | off |
3 | ILLUM | off | on |
4 | DUAL LO | low power | low power |
5 | DUAL HI | high power | high power |
Turning the mode switch does not turn on the lasers. A recessed button on top of the device is tapped once to briefly turn on the lasers or tapped twice to turn the lasers on until deactivated, either by pressing a third time or by turning the mode switch to off. Additionally, an extra pressure switch can be plugged into the rear of the device and then placed virtually anywhere, limited only by the length of the pressure switch's cord; typically one to two feet. This pressure switch operates the same way as the recessed button. [10]
The AN/PEQ-2A upgrade incorporates a blue removable safety block which physically prevents turning the mode switch to any of the high-power modes, which are capable of causing eye damage. Both variants are waterproof to a depth of 20 meters and run on two AA batteries.
Mode | Mode's Marking | Targeting laser | IR illuminator |
---|---|---|---|
0 | OFF | off | off |
1 | AIM LO | low power | off |
2 | DUAL LO | low power | low power |
3 | AIM HI | high power | off |
4 | DUAL LO/HI | low power | high power |
5 | DUAL HI | high power | high power |
A pointing device is a human interface device that allows a user to input spatial data to a computer. CAD systems and graphical user interfaces (GUI) allow the user to control and provide data to the computer using physical gestures by moving a hand-held mouse or similar device across the surface of the physical desktop and activating switches on the mouse. Movements of the pointing device are echoed on the screen by movements of the pointer and other visual changes. Common gestures are point and click and drag and drop.
A night-vision device (NVD), also known as a night optical/observation device (NOD) or night-vision goggle (NVG), is an optoelectronic device that allows visualization of images in low levels of light, improving the user's night vision. The device enhances ambient visible light and converts near-infrared light into visible light which can be seen by the user; this is known as I2 (image intensification). By comparison, viewing of infrared thermal radiation is referred to as thermal imaging and operates in a different section of the infrared spectrum. A night vision device usually consists of an image intensifier tube, a protective housing, and may have some type of mounting system. Many NVDs also include a protective sacrificial lens, mounted over the front lens (ie. objective lens) on NVDs to protect the latter from damage by environmental hazards, and some can incorporate telescopic lenses. The image produced by an NVD is typically monochrome green, as green was considered to be the easiest color to look at for prolonged periods in the dark. Night vision devices may be passive, relying solely on ambient light, or may be active, using an IR (infrared) illuminator to visualize the environment better.
The United States Navy Mk 12 MOD 0/1/H Special Purpose Rifle (SPR) is a designated marksman rifle that was in service with United States Special Operations Forces in the designated marksman role until 2017, also designed to be shorter than standard weapons. SPR initially stood for Special Purpose Receiver as it referred to an add-on upper receiver assembly, but that nomenclature changed to Special Purpose Rifle as the weapon became a stand-alone weapons system.
A laser designator is a laser light source which is used to designate a target. Laser designators provide targeting for laser-guided bombs, missiles, or precision artillery munitions, such as the Paveway series of bombs, AGM-114 Hellfire, or the M712 Copperhead round, respectively.
The SAR 21 is a bullpup assault rifle designed and manufactured in Singapore, chambered for the 5.56x45mm cartridge. First revealed and subsequently adopted by the Singapore Armed Forces (SAF) as its standard service weapon in 1999, it was designed and developed over a four-year period to replace the locally license-built M16S1 by the Ministry of Defence (MINDEF), Singapore Army and the former Chartered Industries of Singapore (CIS), presently ST Engineering Land Systems.
Laser radiation safety is the safe design, use and implementation of lasers to minimize the risk of laser accidents, especially those involving eye injuries. Since even relatively small amounts of laser light can lead to permanent eye injuries, the sale and usage of lasers is typically subject to government regulations.
A laser pointer or laser pen is a handheld device that uses a laser diode to emit a narrow low-power visible laser beam to highlight something of interest with a small bright colored spot.
Boresighting is a method of visually pre-aligning a firearm barrel's bore axis with the target, in order to more easily zero the gunsight. The process is usually performed on a rifle, and can be accomplished either with the naked eye, or with a specialized device called a boresighter.
The AN/PEQ-6 Integrated Laser Light Module (ILLM) is a laser aiming module (LAM) designed and manufactured by Insight Technology for use by United States Special Operations Command (USSOCOM) with the Heckler & Koch Mark 23 semi-automatic pistol and a Knight's Armament Company suppressor; the whole system is designated the Mk 23 Mod 0 Offensive Handgun Weapon System.
The Special Operations Peculiar MODification (SOPMOD) kit is an accessory system for the M4A1 carbine, CQBR, FN SCAR Mk 16/17, HK416 and other weapons used by United States Special Operations Command (USSOCOM) special forces units, though it is not specific to SOCOM. The kit allows US Special Operations Forces personnel to configure their weapons to individual preferences and customize for different mission requirements.
A dazzler is a non-lethal weapon which uses intense directed radiation to temporarily disorient its target with flash blindness. They can effectively deter further advances, regardless of language or cultural barriers, but can also be used for hailing and warning. Targets can include electronic sensors as well as human vision.
The AN/PEQ-5, also known as the 'Carbine Visible Laser (CVL)', is a laser sight manufactured by Insight Technology.
Insight Technology, Inc. is an optical device manufacturer based in Londonderry, New Hampshire, USA.
Under certain conditions, laser light or other bright lights directed at aircraft can be a hazard. The most likely scenario is when a bright visible laser light causes distraction or temporary flash blindness to a pilot, during a critical phase of flight such as landing or takeoff. It is far less likely, though still possible, that a visible or invisible beam could cause permanent harm to a pilot's eyes. Although laser weapons are under development by armed forces, these are so specialized, expensive and controlled that it is improbable for non-military lasers to cause structural damage to an aircraft.
The LLM01 is an adaptive target acquisition module made by Rheinmetall Soldier Electronics GmbH in Stockach, Germany. It is designed to be mounted with a metal integral quick release clamping adapter on the left side of the carry handle adapter of Heckler & Koch G36 assault rifles. It can also be attached to other firearms, such as the Heckler & Koch MP7 submachine gun and L85A2 assault rifle.
A laser sight is a device attached or integral to a firearm to aid target acquisition. Unlike optical and iron sights where the user looks through the device to aim at the target, laser sights project a beam onto the target, providing a visual reference point.
The Mini Integrated Pointing Illumination Module (MIPIM) or AN/PEQ-16 manufactured by Insight/L3Harris is the successor to the AN/PEQ-15 which is the most widely used IR Laser Aiming Module (LAM) in the world.
The Advanced Target Pointer / Illuminator / Aiming Light, ATPIALAN/PEQ-15 known colloquially as the "PEQ-15" [] produced by L3Harris ; is a multifunction IR Target Pointer & Illuminator, a.k.a. a Laser Aiming Module (LAM) for use as a rifle attachment, using a picatinny rail mounting system.