Aerotique Parasol

Last updated

Parasol
Aerotique Parasol 6.jpg
Role Ultralight aircraft
National origin United States
Manufacturer Aerotique Aviation
Yesteryear Aviation
StatusProduction completed
Developed from Heath Parasol
Aerotique Parasol Aerotique Parasol 1.jpg
Aerotique Parasol
Aerotique Parasol Aerotique Parasol 2.jpg
Aerotique Parasol
Aerotique Parasol Aerotique Parasol 3.jpg
Aerotique Parasol
Aerotique Parasol Aerotique Parasol 4.jpg
Aerotique Parasol
Aerotique Parasol Aerotique Parasol 5.jpg
Aerotique Parasol

The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only. [1]

Contents

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The Parasol's factory standard empty weight was 242 lb (110 kg). [1]

The aircraft's fuselage is built with an aluminium tube structure, with wooden wings, all covered with doped aircraft fabric covering. Early production models used wooden wing ribs, while later models transitioned to aluminium ribs. Its 32 ft (9.8 m) span wing uses parallel lift struts supported by jury struts and flying wires. The wings are removable for transportation or storage and take about an hour to remove. The factory installed engine was the Rotax 277, single cylinder, two-stroke powerplant of 28 hp (21 kW). Other than the engine and the wheels, all parts are certified aircraft parts. [1]

The Parasol has conventional three-axis controls, including half-span ailerons. [1] The main landing gear is bungee-suspended and the tail has a steerable skid. Brakes were optional and taxiing the aircraft without them was described as "a little tricky". [1]

As is the case with many parasol designs where the pilot sits directly underneath the wing on the aircraft's center of gravity, the cockpit access is restricted by the close proximity of the wing. [1]

Specifications (Parasol)

Data from Cliche [1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

Fisher FP-404 Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Pop's Props Cloudster is a single seat, open-cockpit, parasol wing, single-engine monoplane, that was first flown in 1995. The aircraft was produced by Pop's Props of Cooksville, Illinois and made available as plans or in kit form. The company is no longer in business and kit production has been transferred to Simplex Aeroplanes of Old Saybrook, Connecticut.

The Pop's Props Zing is a single seat, open-cockpit, parasol wing, single-engine monoplane, first flown in 1996. The aircraft was designed by Scott Land and produced by Pop's Props of Cooksville, Illinois in the form of plans and an aircraft kit. The company is no longer in business and the aircraft kit is now available from Simplex Aeroplanes of Old Saybrook, Connecticut.

The Dart Skycycle is an American single-seat, high wing, strut-braced, single-engine, conventional landing gear ultralight aircraft that was designed by Robert Dart and produced by Dart Aircraft of Mayville, New York for amateur construction.

Carlson Sparrow

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

Joplin Tundra

The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.

The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Worldwide Ultralite Clipper is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries of Katy, Texas in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Mariner Aircraft Mariner is an American ultralight amphibious flying boat that was designed by Larry Seifert and produced by Mariner Aircraft, starting in 1989. The aircraft was supplied as a kit for amateur construction.

The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.

The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.

The Ritz Model A is an American ultralight aircraft that was designed by Gerry Ritz in 1984 and supplied in the form of plans for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

The Ehroflug Coach II S is a Swiss ultralight aircraft, designed by Egon Scheibe and produced by Ehroflug of Altnau. It was introduced in 1989. The aircraft is supplied as plans, as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Microleve ML 500 is a Brazilian ultralight aircraft that was designed by Swiss engineer Hans Gygax and produced by Microleve of Rio de Janeiro. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The Butterfly Banty, also called the Kimbrel Banty for its designer, is an American homebuilt ultralight aircraft that was designed by Mike Kimbrel and produced by Butterfly Aero of Oakville, Washington, introduced in 1984. The aircraft was supplied in the form of plans for amateur construction.

References

  1. 1 2 3 4 5 6 7 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-2. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.