Aichi AB-2

Last updated
AB-2
RoleReconnaissance floatplane
National origin Japan
Manufacturer Aichi
DesignerTetsuo Miki
First flight1930
Number built2
Variants Aichi AB-3

The Aichi AB-2 was a prototype Japanese reconnaissance floatplane of the 1930s. It was a single-engined biplane, of which two examples were built, but no production followed.

Contents

Design and development

In 1929, Tetsuo Miki, a designer at Aichi Tokei Denki Kabushiki Kaisha (Aichi Watch and Electrical Machinery Company) started the design of a catapult launched reconnaissance floatplane with the aim of replacing the Nakajima E2N aboard the Imperial Japanese Navy's warships. Miki's design was a small single-engined biplane. Its fuselage was of steel tube construction with fabric covering, while it had wooden wings that folded to the rear for storage aboard ship. Powerplant was a 330 hp (246 kW) Aichi AC-1, an experimental radial engine. The two-man crew sat in open cockpits, while the aircraft's undercarriage consisted of twin floats. [1]

The two prototypes were completed and flown in 1930. [1] The AC-1 engine was not successful, however, and the project was abandoned after one of the prototypes was destroyed when an exhaust fire spread to the fuselage. The type did form the basis of the later Aichi AB-3 floatplane, of which a single example was built in 1932 for China. [1]

Specifications

Data from Japanese Aircraft 1910–1941 [1]

General characteristics

Performance

Armament

See also

Related lists

Notes

  1. 1 2 3 4 Mikesh and Abe 1990, pp. 68–69.

Related Research Articles

Heinkel HD 25 Type of aircraft

The Heinkel HD 25 was a two-seat shipboard biplane reconnaissance floatplane developed in Germany during the 1920s for production in Japan.

Aichi E3A Type of aircraft

The Aichi E3A was a reconnaissance seaplane developed in Germany as the Heinkel HD 56 to operate from warships of the Imperial Japanese Navy, which designated it the Type 90-1 Reconnaissance Seaplane. It was a conventional single-bay biplane with staggered wings braced by N-type interplane struts. The pilot and gunner sat in tandem, open cockpits.

The Aichi AB-4 was a Japanese flying boat of the 1930s. A single engined biplane, the AB-4 was intended to carry out night reconnaissance for the Imperial Japanese Navy. Six were built and accepted into service as the Experimental 6-Shi Night Reconnaissance Flying boat, three of which were converted to civil transports.

The Nakajima B3N was a prototype Japanese carrier-based torpedo-bomber aircraft of the 1930s. A single-engined biplane with a crew of three, it was unsuccessful, only two being built.

<span class="mw-page-title-main">Yokosuka Ro-go Ko-gata</span> Japanese reconnaissance floatplane

The Yokosuka Ro-go Ko-gata was a Japanese reconnaissance floatplane developed during the First World War by the Japanese Navy Arsenal at Yokosuka, and one of the first indigenous Japanese aircraft to enter production. There were 218 of these aircraft built for the Imperial Japanese Navy, which remained in use until 1928.

Yokosuka K4Y Japanese floatplane trainer

The Yokosuka K4Y was a Japanese floatplane trainer of the 1930s. A single engined two-seat biplane, 211 K4Ys were built between 1933 and 1940, serving as the Imperial Japanese Navy's basic floatplane trainer throughout the Second World War.

Aichi AB-3 Type of aircraft

The Aichi AB-3 was a Japanese ship-board reconnaissance floatplane of the 1930s. The AB-3, a single-seat, single-engined biplane, was designed to equip a light cruiser Ning Hai being built in Japan for the Chinese navy, a single aircraft being accepted by the Chinese.

<span class="mw-page-title-main">Kawanishi E11K</span> Japanese flying boat

The Kawanishi E11K was a Japanese flying boat of the 1930s. It was designed as a night reconnaissance aircraft for the Imperial Japanese Navy, but was not accepted, the two aircraft built being used as transports as the Type 96 Transport Flying Boat during the Second World War.

The Aichi AB-6, or Aichi Experimental 7-Shi Reconnaissance Seaplane, was a prototype Japanese reconnaissance floatplane. It was a single-engined, three-seat biplane intended for the Imperial Japanese Navy, but only one was built, the rival aircraft from Kawanishi, the E7K being preferred.

The Aichi F1A was a prototype Japanese floatplane of the 1930s. A single-engined biplane, the F1A was intended as a short-range observation aircraft suitable for operation off the Imperial Japanese navy's warships, but only two were built, the Mitsubishi F1M being selected instead.

The Kawanishi K-11 was a 1920s Japanese single-seat carrier fighter designed and built by the Kawanishi Aircraft Company to meet an Imperial Japanese Navy requirement. The type did not enter service and only two prototypes were built.

<span class="mw-page-title-main">Mitsubishi 1MF9</span> Japanese carrier-based fighter prototype

The Mitsubishi 1MF9 or Mitsubishi Experimental Taka-type Carrier Fighter was a prototype Japanese fighter aircraft of the 1920s. It was a single-engined, single-seat biplane intended to operate from the Imperial Japanese Navy's aircraft carriers, but only two were built, with the type being rejected by the Navy.

<span class="mw-page-title-main">Mitsubishi MC-1</span> Japanese airliner prototype

The Mitsubishi MC-1 was a 1920s Japanese single-engined biplane airliner designed and built by the Mitsubishi Aircraft Company.

The Kawanishi E10K, also known as Kawanishi Type T, Kawanishi Navy Type 94 Transport Seaplane and Kawanishi Navy Experimental 9-Shi Night Reconnaissance Seaplane, was a small Japanese flying boat of the 1930s. It was a single-engined biplane intended to meet a requirement for a night reconnaissance aircraft for the Imperial Japanese Navy, but was not selected for production, the single prototype being converted to a transport and operated as the Navy Type 94 Transport.

<span class="mw-page-title-main">Kawanishi K-8 Transport Seaplane</span> Japanese mail floatplane

The Kawanishi K-8 Transport Seaplane was a Japanese single-engined floatplane of the 1920s. Seven were built in 1926 and 1927, and were used to operate airmail services.

The Mitsubishi Ka-8 or Mitsubishi Experimental 8-Shi Two-seat Fighter was a prototype Japanese two-seat carrier-based fighter aircraft of the 1930s. Two were built, but no production followed.

The Nakajima D3N was a Japanese carrier-based dive bomber of the 1930s. Three prototypes were built for the Imperial Japanese Navy, but no production followed, with the Aichi D3A being selected instead.

The Kawanishi K8K was a Japanese floatplane trainer designed and built by the Kawanishi Aircraft Company for the Imperial Japanese Navy. It was selected for production, but only a small number were built before a change in the Japanese Navy's training needs led to production being stopped.

The Watanabe K8W was a Japanese floatplane trainer designed and built by Watanabe for the Imperial Japanese Navy.

<span class="mw-page-title-main">Mitsubishi B4M</span> Japanese torpedo bomber

The Mitsubishi Ka-12 or B4M was a Japanese carrier-based torpedo bomber of 1934. Two prototypes were built by Mitsubishi for the Imperial Japanese Navy. A development of the company's 3MT10 of 1932, the design differed primarily in the use of a radial engine and metal wing, which made the whole aircraft significantly lighter and faster. However, the design could not realise its potential as the wing was inefficiently stiff and the B4M was not selected for production. The competing Yokosuka B4Y was chosen to serve on the Navy's aircraft carriers instead.

References