All Metal Products Company

Last updated
Tin toy car, Toytown line, Wyandotte Toys Toy vehicles seen at Hershey '09 (4436621598).jpg
Tin toy car, Toytown line, Wyandotte Toys

All Metal Products Company was an American toy company founded in 1920 and based in Wyandotte, Michigan for most of its history. It produced inexpensive pressed metal toys under the Wyandotte brand name, and was the largest manufacturer of toy guns in the US for several decades in the 20th century. [1] The company's slogan was "Wyandotte Toys are Good and Safe." To keep costs down, the company used scrap and surplus raw materials whenever possible, often manufacturing their toys from scrap metal obtained from local auto factories.

Contents

History

1950s vintage Toy Cork Rifle ("Pop Gun") Vintage 1950s Toy Cork Rifle ("Pop Gun") by All Metal Products, Wyandotte, Mich. (8401937535).jpg
1950s vintage Toy Cork Rifle ("Pop Gun")

Initially, All Metal Products Company specialized in toy guns, including pop guns, water pistols, and air rifles. Their slogan in the 1920s was "Every Boy Wants a Pop Gun." By 1927 they had become the world's largest manufacturer of toy guns. Wyandotte Toys stopped manufacturing air rifles in 1929, but continued to dominate the toy gun market throughout the remainder of their history by producing pop guns, clicker pistols, dart guns and pistols, cap guns and a variety of plastic pistols. In 1929 the company added girls' toys and toy vehicles, as well as lithographed novelty toys in 1936. Metal toys were banned during World War II because the metals were needed for the war effort. The company survived by producing wooden toys and die-cut cardboard "build your own" play sets during the war. All Metal Products also manufactured en bloc clips for the M1 Garand rifle. Clips of this nature will be stamped with "AMP1" on the rear of the clip.

In 1948, die cast and plastic toys were added to the Wyandotte line, allowing it to compete with other companies who sold inexpensive dime store-type toys at lower prices than the Wyandotte pressed metal toys. In 1946, All Metal Products Company bought the Hafner Manufacturing Company, the maker of "Hafner Clockwork" pressed metal toy trains.

In the early 1950s, All Metal Products Company moved from its site on Sycamore and 14th St. in Wyandotte to Ohio, hoping that closer proximity to Ohio's steel mills and cheaper Ohio labor would help the company cut costs. The effort was not enough to prevent All Metal Products Company from going bankrupt in 1956, resulting in the sale of part of its product line, including the former Hafner trains, to competitor Louis Marx and Company. What remained of the company attempted a comeback in 1957 but failed.

Collectibles

Wyandotte Toytown fire station Wyandotte+Toytown+Fire+Dept.+1n.JPG
Wyandotte Toytown fire station

Today "Wyandotte" toys are highly sought after collectibles, and since they were made mostly of metal many continue to survive today. The toy guns and airplanes produced before World War II were simply constructed from pressed metal and often painted in bright colors such as red, yellow, silver and olive green. Because of their simplicity these toys can often still be found in good condition. Toy guns with a science fiction theme are particularly desirable. These toys are only loosely based on actual guns and vehicles, and are often referred to today based on the vehicles to which they bear the closest resemblance. Wyandotte toys produced after World War II can be easily distinguished from pre-War toys by the elaborate lithograph markings that decorate them. These toys were manufactured using much thinner metal, and weigh less than the pre-War toys.

Related Research Articles

Wyandotte, Michigan City in Michigan, United States

Wyandotte is a city in Wayne County in the U.S. state of Michigan. The population was 25,058 at the 2020 census.

Toy guns are toys which imitate real guns, but are designed for recreational sport or casual play by children. From hand-carved wooden replicas to factory-produced pop guns and cap guns, toy guns come in all sizes, prices and materials such as wood, metal, plastic or any combination thereof. Many newer toy guns are brightly colored and oddly shaped to prevent them from being mistaken for real firearms.

Louis Marx and Company American Toy Company

Louis Marx and Company was an American toy manufacturer in business from 1919 to 1980. Its products were often imprinted with the slogan "One of the many Marx toys, have you all of them?"

American Flyer American Toy company

American Flyer is a brand of toy train and model railroad manufactured in the United States.

Hafner Manufacturing Company American Toy Company

The Hafner Manufacturing Company was a maker of tinplate clockwork-powered O gauge toy trains, based in Chicago, Illinois, from 1914 to 1951. It was formed when its founder, William Frederick Hafner, a co-founder of American Flyer, left the company in favor of creating his own company.

Cap gun

A cap gun, cap pistol, or cap rifle is a toy gun that creates a loud sound simulating a gunshot and smoke when a small percussion cap is ignited. Cap guns were originally made of cast iron, but after World War II were made of zinc alloy, and most newer models are made of plastic. Cap guns get their name from the small discs of shock-sensitive explosive compounds that provide the noise and smoke, effectively the same as the Maynard tape primer and percussion caps used in real firearms of the mid to late 1800s but usually smaller and made from cheap plastic or paper. Some are arranged in plastic rings of eight or twelve. There are also single caps, roll caps, disk caps, and cap strips all of which are actually extremely small versions of percussion fireworks. Armstrong's mixture is often used today as the explosive, but previously the tiny powder charge was a simple mixture of potassium perchlorate, sulfur, and antimony sulfide sandwiched between two paper layers which hold in the gases long enough to give a sound report when the cap is struck.

Entertech was a brand of battery-powered motorized water guns sold in the United States from 1985 to 1990 by the now-defunct LJN. Unlike the colorful designs of many of the simple hand powered pump water guns of that time, most of the Entertech water guns were manufactured from black plastics with a matte finish to resemble real firearms.

Airsoft gun Special type of air gun used in airsoft

Airsoft guns are replica toy guns used in airsoft sports. They are a special type of low-power smoothbore air guns designed to shoot non-metallic spherical projectiles often colloquially referred to as "BBs", which are typically made of plastic or biodegradable resin materials. Airsoft gun powerplants are designed to have low muzzle energy ratings and the pellets have significantly less penetrative and stopping powers than conventional airguns, and are generally safe for competitive sporting and recreational purposes if proper protective gear is worn.

Lines Bros British toy manufacturer

Lines Bros Ltd was a British toy manufacturer of the 20th century, operating under the Tri-ang Toys brand name.

Lone Star Products Ltd. was the brand name used by the British company Die Cast Machine Tools Ltd (DCMT) for its toy products. DCMT was based in Welham Green, Hertfordshire, north of London.

Army men Plastic toy soldiers

Army men, or plastic soldiers, are toy soldiers that are about 5 cm (2.0 in) tall and most commonly molded from olive green, relatively unbreakable plastic. Unlike the more expensive toy soldiers available in hobby shops, army men are sold at low prices in discount stores and supermarkets in bulk packaging. Army men are green and almost always dressed in modern military uniforms and armed with 20th-century weapons. 'Jumbo' army men are a less common secondary scale with 4.75-inch (12.1 cm) soldiers made with the same process.

Daisy Outdoor Products Air gun manufacturer

Daisy Outdoor Products is an American airgun manufacturer known particularly for their lines of BB guns. It was formed in 1882 initially as the Plymouth Iron Windmill Company in Plymouth, Michigan, to manufacture steel windmills, and from 1888 started bundling BB-caliber air guns with each windmill purchase as a sales promotion. With the unrivaled popularity of their 1888-model Daisy BB Guns, the company changed the name to Daisy Manufacturing Company in 1895 and switched their business to solely producing air guns for sale. Throughout the 20th century, Daisy has been known as a company that makes and sells BB guns and pellet youth rifles. Their Red Ryder BB Gun is perhaps the best known and longest production item, which has been featured in many TV shows and movies since its introduction in the spring of 1940.

Nylint

The Nylint Corporation was founded in 1937 by brothers Bernard and Ragnar Klint, and David Nyberg of Rockford, Illinois. Their uncle, David Nyberg, supplied much of the initial capital to start the company. The company name of Nylint is a combination of both the Nyberg and Klint names. It was incorporated under the name “Nylint Tool and Manufacturing” and its initial operation was located at 5th Avenue and 13th Street in Rockford. Bernard Klint and his wife Grace remained actively involved for nearly 60 years in this privately held company until their deaths in the mid-1990s.

Britains Deetail toy soldiers were a popular product in the 1970s and 1980s. Manufactured in England by W. Britain, the 1/32 (54mm) scale plastic figures were finished with hand painted details and came with sturdy Zamak metal bases. In the early 1990s production moved to China before eventually being phased out.

Tin toy

A tin toy, or tin lithograph toy, is a mechanical toy made out of tinplate and colorfully painted by chromolithography to resemble primarily a character or vehicle.

The Hubley Manufacturing Company was an American producer of a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles and cap guns, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed scale metal kits of Classic cars in about 1:20 scale. Starting in 1960, Hubley participated for a couple of years with Detroit automakers as a plastic promotional model maker. Many Hubley toys are now sought-after collectibles.

J. Chein & Company was an American toy manufacturer in business from 1903 through the 1980s. It is best remembered today for its mechanical toys made from stamped and lithographed tin produced from the 1930s through the 1950s.

Kaden models

Kaden Nachod is the somewhat anglicized name for the Kovodružstvo Náchod toy factory in the town of Nový Hrádek in the Czech Republic. The factory, however, started making toys about 1950 when the country was still communist united Czechoslovakia.

Since the introduction of the first Lego weapon in 1978, Lego has been criticised for the presence of weaponry and, consequently, the levels of violence presented within its product range. The relationship between Lego and violence has been a source of controversy, despite the fact that The Lego Group has maintained an ethos of not producing products that promote violence. The presence of toy weapons in Lego construction toys has increased over the years, with the introduction of many types of weapons across a variety of Lego themes.

Pyro Plastics Corporation manufacturer

The Pyro Plastics Corporation was an American manufacturing company based in Union Township, NJ and popular during the 1950s and 1960s that produced toys and plastic model kits. Some of the scale models manufactured and commerciaised by Pyro were cars, motorcycles, aircraft, ships, and military vehicles, and animal and human figures.

References

  1. HISTORY: Remembering Wyandotte Toys, The News-Herald, Wallace Hayden, December 5, 2008