Anaerobic corrosion

Last updated
Bacteria-induced anaerobic corrosion of a piece of iron Bacterial anaerobic corrosion-en.svg
Bacteria-induced anaerobic corrosion of a piece of iron

Anaerobic corrosion (also known as hydrogen corrosion) is a form of metal corrosion occurring in anoxic water. Typically following aerobic corrosion, anaerobic corrosion involves a redox reaction that reduces hydrogen ions and oxidizes a solid metal. [1] This process can occur in either abiotic conditions through a thermodynamically spontaneous reaction or biotic conditions through a process known as bacterial anaerobic corrosion. Along with other forms of corrosion, anaerobic corrosion is significant when considering the safe, permanent storage of chemical waste. [2]

Contents

Chemical mechanisms

The overall process of corrosion can be represented by a bimodal function, where the type of corrosion varies with time, including both oxygen-driven and anaerobic mechanisms. [1] The dominant process will depend on the given conditions. During oxygen-driven corrosion, layers of rust form, creating various non-homogenous anoxic niches throughout the metal's surface. [1] Within the niches the diffusion of oxygen is inhibited, leading to the ideal conditions for anaerobic corrosion to occur. [1]

Abiotic

Under anoxic conditions, the mechanism for corrosion requires a substitute for oxygen as the oxidizing agent in the redox reaction. [1] For abiotic anaerobic corrosion, that substitute is the hydrogen ion produced in the dissociation of water and the proceeding reduction of the hydrogen ions into diatomic hydrogen gas. [1] The anodic half-reaction involves the oxidation of a metal in aqueous solution into a metal hydroxide. [1] A common reaction that represents this process is the transformation of solid iron in steel into ferrous hydroxide as visualized in the following overall redox reaction. [1]

The ferrous hydroxide may be oxidized further by additional hydrogen ions in water to form the mineral magnetite (Fe3O4) in the process called the Schikorr reaction. [1]

In general, the anaerobic corrosion of metals, such as iron and copper, occur at very slow rates. [1] [2] However, when in chloride-containing aqueous environments, the rate increases because of the introduction of new mechanisms with the addition of a chloride anions. [1] [2]

Biotic

When in biotic conditions, anaerobic corrosion can be facilitated by the metabolic activity of microorganisms in the surrounding environment. [1] This process is known as microbiologically-influenced corrosion or bacterial anaerobic corrosion. Most notably, the production of dissolved sulfides by sulfate-reducing bacteria (SRB) react with solid metals and hydrogen ions to form metal sulfides in a redox reaction. [2]

Environmental significance

The effects of anaerobic corrosion are evident when evaluating the safety of chemical waste disposal. Currently, the permanent disposal of nuclear waste is commonly in deep geological repositories (DGR) that use copper coating to prevent metal corrosion. [2] In the DGR, four major types of corrosion are expected to occur, including oxygen-driven, radiation-influenced, anaerobic, and microbiologically-influenced corrosion. [2] Of these, the most notable process is the microbiologically-influenced corrosion in terms of the magnitude of corrosion. [2] The ability of microorganisms such as SRB to survive in a wide range of environments also lends to their relevance when considering the threat of corrosion to permanent chemical waste disposal. [2]

See also

Related Research Articles

Bioleaching is the extraction of metals from their ores through the use of living organisms. This is much cleaner than the traditional heap leaching using cyanide. Bioleaching is one of several applications within biohydrometallurgy and several methods are used to recover copper, zinc, lead, arsenic, antimony, nickel, molybdenum, gold, silver, and cobalt.

<span class="mw-page-title-main">Electrochemistry</span> Branch of chemistry

Electrochemistry is the branch of physical chemistry concerned with the relationship between electrical potential difference, as a measurable and quantitative phenomenon, and identifiable chemical change, with the potential difference as an outcome of a particular chemical change, or vice versa. These reactions involve electrons moving via an electronically-conducting phase between electrodes separated by an ionically conducting and electronically insulating electrolyte.

<span class="mw-page-title-main">Rust</span> Type of iron oxide

Rust is an iron oxide, a usually reddish-brown oxide formed by the reaction of iron and oxygen in the catalytic presence of water or air moisture. Rust consists of hydrous iron(III) oxides (Fe2O3·nH2O) and iron(III) oxide-hydroxide (FeO(OH), Fe(OH)3), and is typically associated with the corrosion of refined iron.

<span class="mw-page-title-main">Redox</span> Chemical reaction in which oxidation states of atoms are changed

Redox is a type of chemical reaction in which the oxidation states of substrate change. Oxidation is the loss of electrons or an increase in the oxidation state, while reduction is the gain of electrons or a decrease in the oxidation state.

<span class="mw-page-title-main">Corrosion</span> Gradual destruction of materials by chemical reaction with its environment

Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials by chemical or electrochemical reaction with their environment. Corrosion engineering is the field dedicated to controlling and preventing corrosion.

The pedosphere is the outermost layer of the Earth that is composed of soil and subject to soil formation processes. It exists at the interface of the lithosphere, atmosphere, hydrosphere and biosphere. The pedosphere is the skin of the Earth and only develops when there is a dynamic interaction between the atmosphere, biosphere, lithosphere and the hydrosphere. The pedosphere is the foundation of terrestrial life on Earth.

<span class="mw-page-title-main">Sulfate-reducing microorganism</span> Microorganisms which "breathe" sulfates

Sulfate-reducing microorganisms (SRM) or sulfate-reducing prokaryotes (SRP) are a group composed of sulfate-reducing bacteria (SRB) and sulfate-reducing archaea (SRA), both of which can perform anaerobic respiration utilizing sulfate (SO2−
4
) as terminal electron acceptor, reducing it to hydrogen sulfide (H2S). Therefore, these sulfidogenic microorganisms "breathe" sulfate rather than molecular oxygen (O2), which is the terminal electron acceptor reduced to water (H2O) in aerobic respiration.

<span class="mw-page-title-main">Iron cycle</span>

The iron cycle (Fe) is the biogeochemical cycle of iron through the atmosphere, hydrosphere, biosphere and lithosphere. While Fe is highly abundant in the Earth's crust, it is less common in oxygenated surface waters. Iron is a key micronutrient in primary productivity, and a limiting nutrient in the Southern ocean, eastern equatorial Pacific, and the subarctic Pacific referred to as High-Nutrient, Low-Chlorophyll (HNLC) regions of the ocean.

<span class="mw-page-title-main">Pitting corrosion</span> Form of insidious localized corrosion in which a pit develops at the anode site

Pitting corrosion, or pitting, is a form of extremely localized corrosion that leads to the random creation of small holes in metal. The driving power for pitting corrosion is the depassivation of a small area, which becomes anodic while an unknown but potentially vast area becomes cathodic, leading to very localized galvanic corrosion. The corrosion penetrates the mass of the metal, with a limited diffusion of ions.

<span class="mw-page-title-main">Iron(II) sulfide</span> Chemical compound

Iron(II) sulfide or ferrous sulfide is one of a family chemical compounds and minerals with the approximate formula FeS. Iron sulfides are often iron-deficient non-stoichiometric. All are black, water-insoluble solids.

<span class="mw-page-title-main">Iron-oxidizing bacteria</span>

Iron-oxidizing bacteria are chemotrophic bacteria that derive energy by oxidizing dissolved ferrous iron. They are known to grow and proliferate in waters containing iron concentrations as low as 0.1 mg/L. However, at least 0.3 ppm of dissolved oxygen is needed to carry out the oxidation.

Microbial corrosion, also called microbiologically influenced corrosion (MIC), microbially induced corrosion (MIC) or biocorrosion, is "corrosion affected by the presence or activity of microorganisms in biofilms on the surface of the corroding material." This corroding material can be either a metal or a nonmetal.

Microbial metabolism is the means by which a microbe obtains the energy and nutrients it needs to live and reproduce. Microbes use many different types of metabolic strategies and species can often be differentiated from each other based on metabolic characteristics. The specific metabolic properties of a microbe are the major factors in determining that microbe's ecological niche, and often allow for that microbe to be useful in industrial processes or responsible for biogeochemical cycles.

Biogenic sulfide corrosion is a bacterially mediated process of forming hydrogen sulfide gas and the subsequent conversion to sulfuric acid that attacks concrete and steel within wastewater environments. The hydrogen sulfide gas is biochemically oxidized in the presence of moisture to form sulfuric acid. The effect of sulfuric acid on concrete and steel surfaces exposed to severe wastewater environments can be devastating. In the USA alone, corrosion is causing sewer asset losses estimated at around $14 billion per year. This cost is expected to increase as the aging infrastructure continues to fail.

<span class="mw-page-title-main">Biomining</span> Technique of extracting metals from ores using prokaryotes or fungi

Biomining is the technique of extracting metals from ores and other solid materials typically using prokaryotes, fungi or plants. These organisms secrete different organic compounds that chelate metals from the environment and bring it back to the cell where they are typically used to coordinate electrons. It was discovered in the mid 1900s that microorganisms use metals in the cell. Some microbes can use stable metals such as iron, copper, zinc, and gold as well as unstable atoms such as uranium and thorium. Large chemostats of microbes can be grown to leach metals from their media. These vats of culture can then be transformed into many marketable metal compounds. Biomining is an environmentally friendly technique compared to typical mining. Mining releases many pollutants while the only chemicals released from biomining is any metabolites or gasses that the bacteria secrete. The same concept can be used for bioremediation models. Bacteria can be inoculated into environments contaminated with metals, oils, or other toxic compounds. The bacteria can clean the environment by absorbing these toxic compounds to create energy in the cell. Bacteria can mine for metals, clean oil spills, purify gold, and use radioactive elements for energy.

Hydrogen-oxidizing bacteria are a group of facultative autotrophs that can use hydrogen as an electron donor. They can be divided into aerobes and anaerobes. The former use hydrogen as an electron donor and oxygen as an acceptor while the latter use sulphate or nitrogen dioxide as electron acceptors. Species of both types have been isolated from a variety of environments, including fresh waters, sediments, soils, activated sludge, hot springs, hydrothermal vents and percolating water.

<span class="mw-page-title-main">Bacterial anaerobic corrosion</span>

Bacterial anaerobic corrosion is the bacterially-induced oxidation of metals. Corrosion of metals typically alters the metal to a form that is more stable. Thus, bacterial anaerobic corrosion typically occurs in conditions favorable to the corrosion of the underlying substrate. In humid, anoxic conditions the corrosion of metals occurs as a result of a redox reaction. This redox reaction generates molecular hydrogen from local hydrogen ions. Conversely, anaerobic corrosion occurs spontaneously. Anaerobic corrosion primarily occurs on metallic substrates but may also occur on concrete.

<span class="mw-page-title-main">Schikorr reaction</span>

The Schikorr reaction formally describes the conversion of the iron(II) hydroxide (Fe(OH)2) into iron(II,III) oxide (Fe3O4). This transformation reaction was first studied by Gerhard Schikorr. The global reaction follows:

<i>Mariprofundus ferrooxydans</i> Species of bacterium

Mariprofundus ferrooxydans is a neutrophilic, chemolithotrophic, Gram-negative bacterium which can grow by oxidising ferrous to ferric iron. It is one of the few members of the class Zetaproteobacteria in the phylum Pseudomonadota. It is typically found in iron-rich deep sea environments, particularly at hydrothermal vents. M. ferrooxydans characteristically produces stalks of solid iron oxyhydroxides that form into iron mats. Genes that have been proposed to catalyze Fe(II) oxidation in M. ferrooxydans are similar to those involved in known metal redox pathways, and thus it serves as a good candidate for a model iron oxidizing organism.

Evolution of metal ions in biological systems refers to the incorporation of metallic ions into living organisms and how it has changed over time. Metal ions have been associated with biological systems for billions of years, but only in the last century have scientists began to truly appreciate the scale of their influence. Major and minor metal ions have become aligned with living organisms through the interplay of biogeochemical weathering and metabolic pathways involving the products of that weathering. The associated complexes have evolved over time.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Melchers, Robert E. (2014). "Microbiological and abiotic processes in modelling longer-term marine corrosion of steel". Bioelectrochemistry. 97: 89–96. doi:10.1016/j.bioelechem.2013.07.002. hdl: 1959.13/1063278 . ISSN   1567-5394. PMID   24067447. Archived from the original on 2023-02-21. Retrieved 2021-11-23.
  2. 1 2 3 4 5 6 7 8 Hall, David S.; Behazin, Mehran; Jeffrey Binns, W.; Keech, Peter G. (2021). "An evaluation of corrosion processes affecting copper-coated nuclear waste containers in a deep geological repository". Progress in Materials Science. 118: 100766. doi: 10.1016/j.pmatsci.2020.100766 . ISSN   0079-6425. S2CID   228835896.