BB 10 (keelboat)

Last updated

BB 10
Development
Designer Børge Børresen and Anders Børresen
Location Denmark
Year1977
No. built150
Builder(s) Børresen Bådebyggeri
NameBB 10
Boat
Boat weight 4,956 lb (2,248 kg)
Draft 4.80 ft (1.46 m)
Hull
Type Monohull
Construction Fiberglass
LOA 32.80 ft (10.00 m)
LWL 23.92 ft (7.29 m)
Beam 7.55 ft (2.30 m)
Engine typeoptional outboard motor
Hull appendages
Keel/board typefin keel
Ballast2,700 lb (1,225 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig type Bermuda rig
I foretriangle height30.10 ft (9.17 m)
J foretriangle base9.82 ft (2.99 m)
P mainsail luff36.09 ft (11.00 m)
E mainsail foot11.65 ft (3.55 m)
Sails
Sailplan Fractional rigged sloop
Mainsail area210.22 sq ft (19.530 m2)
Jib/genoa area147.79 sq ft (13.730 m2)
Spinnaker area545 sq ft (50.6 m2)
Total sail area358.02 sq ft (33.261 m2)
Racing
PHRF 120 (average)

The BB 10 (also referred to as the BB10, BB-10 and BB 10 Meter) is a Danish sailboat that was designed by Børge Børresen and his son, Anders Børresen, as a one-design racer and first built in 1977. [1] [2] [3] [4]

Contents

Production

The design is built by Børresen Bådebyggeri (Børresen Boatbuilding) in Denmark, with about 150 boats completed since production started in 1977. It remained in production in 2019. [1] [3] [5] [6]

About 20 boats were also built at Scandinavian Yachts in Annapolis, Maryland, United States. North American production was intended to move to Whitby Boat Works in Whitby, Ontario, Canada in the 1980s, but it unclear if any boats were completed there. [4]

Design

The BB-10 is a recreational keelboat, built predominantly of fiberglass over a foam core. It has a fractional sloop rig, a spooned raked stem, a raised counter reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 4,956 lb (2,248 kg) and carries 2,700 lb (1,225 kg) of lead ballast. [1] [3]

The boat has a draft of 4.80 ft (1.46 m) with the standard keel fitted. [1]

A motor is considered optional, but the boat can be fitted with a small outboard motor for docking and maneuvering. [3]

Optimized for racing, below decks the BB 10 is very cramped, compared to other boats of this length and has only 4.75 ft (1.45 m) of headroom. The design's galley slides out from beside the companionway steps for use and includes a two-burner alcohol-fired stove. Sleeping accommodations are minimal and consist of two settee sea berths, plus a bow "V"-berth. Ventilation is provided by a bow hatch and a translucent hatch forward of the mast. There is no built-in fresh water tank. [3] [4]

The standing rigging is of stainless steel rod and the design has wooden decks. The cockpit is large and includes provisions for a cockpit table. All lines and controls are led to the cockpit, even the boom control line for the 545 sq ft (50.6 m2) spinnaker. Four deck winches are provided for the spinnaker and genoa sheets. [3]

The design has a PHRF racing average handicap of 120. [3]

Operational history

A 1984 review in Canadian Yachting by Steve Killing compared the design to an enlarged Soling with a narrow beam. About the accommodations, he wrote, "Their brochure states that "standing headroom is only four feet, nine inches, though sitting headroom is ample." I'm not sure that "standing headroom" is the correct term here, but we will let the figures speak for themselves. The interior is not meant to be lush. It's a bit like camping in a fiberglass tent. There are settee berths for sitting or snoozing and a galley module that pulls out from under the cockpit when required." [4]

In a 1994 review Richard Sherwood described the design, "the BB is a boat for racing, not cruising. Its very narrow beam sacrifices interior volume for speed. The narrow beam and light displacement also are penalized by the IOR. However, BB is claimed to beat at 6 knots in 6 knots of wind, reach at 8, and semiplane at 13 in 18 knots of wind." [3]

See also

Similar sailboats

Related Research Articles

Starwind 223 Sailboat class

The Starwind 223 is an American trailerable sailboat, that was designed by Cortland Steck and first built in 1984.

The Pearson Electra is an American trailerable sailboat that was designed by Carl Alberg as a Midget Ocean Racing Club (MORC) racer and first built in 1960.

The Freedom 35 is an American sailboat that was designed by David Pedrick as a racer/cruiser and first built in 1993.

The Dickerson 41 is an American sailboat that was designed by Ernest Tucker as a cruiser and first built in 1973.

The Cal 22 is an American trailerable sailboat that was designed by C. R. Hunt Associates as a cruiser and first built in 1984.

The Capri 26 is an American trailerable sailboat that was designed by Frank W. Butler and Gerry Douglas as a cruiser-racer and first built in 1990.

The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.

The ETAP 20 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1975.

The ETAP 32i is a Belgian sailboat that was designed by French designers Philippe Harlé and Alain Mortain (Harlé-Mortain), as a cruiser and first built in 1992.

The Fisher 25 or Fisher 25 MS is a British trailerable pilothouse sailboat that was designed by Wyatt and Freeman as a cruiser and first built in 1974.

The Freedom 21 is an American trailerable sailboat that was designed by Gary Hoyt and first built in 1982. It was available as a catboat or sloop rig.

The Golif 21, or just Golif, is a French trailerable sailboat that was designed by P. Jouët & Cie as a pocket cruiser. It was named for the fictional pirate, Louis Le Golif and first built in 1961.

The Irwin 10/4 is an American trailerable sailboat that was designed by Ted Irwin and Walter Scott as a cruiser and first built in 1975.

The La Paz 25 is an American trailerable sailboat that was designed by Lyle C. Hess as a motorsailer and first built in 1973.

The Mark 25 is an American trailerable sailboat that was designed by Canadian George Harding Cuthbertson, as one of the first works under his new design firm Motion Designs Limited after he left C&C Design. The boat was intended as a racer-cruiser and first built in 1984.

The Mustang 22 is an American trailerable sailboat that was designed by Martin Bludworth as a Midget Ocean Racing Club racer and first built in 1969.

The Balboa 26 is an American trailerable sailboat that was designed by Lyle C. Hess as cruiser and first built in 1969.

The S2 35 is an American sailboat that was designed by Graham & Schlageter as a cruiser. The design is also referred to as the S2 35C for "center cockpit", although there was no other configuration model built. At its introduction in 1986, S2 Yachts marketed the boat as the S2 35 Mid Cockpit.

The Venture 21 is an American trailerable sailboat that was designed by Roger MacGregor as a racer-cruiser and first built in 1966.

The Walton 25 is a trailerable sailboat first built in 1961. It was sold under a number of names, including Continental Folkboat, Whitby 25 Folkboat, Great Lakes Folkboat as well as Walton 25.

References

  1. 1 2 3 4 McArthur, Bruce (2019). "BB-10 sailboat". sailboatdata.com. Archived from the original on 4 December 2019. Retrieved 4 December 2019.
  2. McArthur, Bruce (2019). "Børresen Brothers". sailboatdata.com. Archived from the original on 4 December 2019. Retrieved 4 December 2019.
  3. 1 2 3 4 5 6 7 8 Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 254-255. Houghton Mifflin Company, 1994. ISBN   0-395-65239-1
  4. 1 2 3 4 Killing, Steve (July 1984). "BB 10 - Fast and Simple". Canadian Yachting . Archived from the original on 25 June 2017. Retrieved 4 December 2019.
  5. McArthur, Bruce (2019). "Børresen Bådebyggeri". sailboatdata.com. Archived from the original on 27 September 2020. Retrieved 4 December 2019.
  6. Børresen Bådebyggeri. "BB10 - Family Racer". borresen.com. Archived from the original on 29 April 2019. Retrieved 4 December 2019.