| Bartel BM 6 | |
|---|---|
 | |
| General information | |
| Type | Trainer aircraft |
| Manufacturer | Samolot |
| Status | Prototype |
| Primary user | Polish Air Force |
| Number built | 1 |
| History | |
| First flight | 8 April 1930 |
The Bartel BM 6 was a Polish biplane trainer fighter aircraft of 1930. It did not advance beyond the prototype stage.
The aircraft was designed by Ryszard Bartel in the Samolot factory in Poznań, as a trainer-fighter plane. The BM-6 prototype, designated BM 6a, was flown on 8 April 1930 in Poznań. Its advantage was an easy construction and maintenance, according to Bartel's design philosophy. A distinguishing feature of all Bartels was an upper wing of a shorter span, because lower and upper wing halves were interchangeable (i.e. the lower wingspan included the fuselage width). It first introduced a mixed construction to Bartel's designs.
After trials, the prototype was modified in July 1930. The prototype was later redesignated BM 6a/II after it was substantially modified. It offered quite good flight characteristics and was capable of aerobatic flight. It was demonstrated in a fighter-plane competition in Bucharest in 1930, along with the similar PZL P.1.
The second prototype BM 6b, with a Wright Whirlwind 220 hp radial engine, was ordered, but work upon it ceased with closure of the Samolot factory in mid-1930. The PWS works, which inherited many of Samolot's projects, did not continue the project, for it had its own similar design, the PWS-11.
Mixed construction biplane. Steel framed fuselage, rectangular in cross-section, canvas covered (engine and upper sections - aluminum covered). Rectangular two-spar wings with rounded ends, plywood and canvas covered. Upper wing span: 7.36 m, lower wing span: 8.10 m. Lower and upper wing halves were interchangeable. Single pilot, sitting in open cockpit, with a windshield. The V8 engine Hispano-Suiza 8Be was modified to lower power output (from 220 hp to 180 hp). Radiator below the fuselage. Fixed landing gear, with a rear skid. Two-blade wooden propeller of fixed pitch. Fuel tank in fuselage: 168 L capacity.
After state trials in 1931, the prototype was used in an advanced training school in Grudziądz, then in an aviation training center in Dęblin.
Poland Data fromPolish Aircraft 1893–1939 [1]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
The Lublin R-VIII was a Polish bomber, reconnaissance aircraft and seaplane designed in the late 1920s by the Plage i Laśkiewicz factory in Lublin. It was the first in-house design of Plage i Laśkiewicz, and the first with the name Lublin.
The PWS-10 was a Polish fighter aircraft, constructed in the PWS. It was the first Polish-designed fighter to enter serial production.
The PZL.48 Lampart (leopard) was a Polish heavy fighter-bomber design, that remained only a project, owing to the outbreak of World War II.
The Bartel BM.4 was a Polish biplane primary trainer aircraft used from 1929 to 1939 by the Polish Air Force and Polish civilian aviation, manufactured in the Samolot factory in Poznań. It was the first plane of Polish design put into production.
The Bartel BM 5, initially known as M.5 was a Polish biplane advanced trainer used from 1930 to 1939 by the Polish Air Force, manufactured in the Samolot factory in Poznań.
The Bartel BM 2, originally Bartel M.2 was a Polish biplane primary trainer aircraft prototype of 1926.
The PZL P.1 was a Polish fighter, designed by the engineer Zygmunt Puławski, manufactured by the PZL state-owned factory. It remained a prototype, but it was the first of the Polish PZL gull wing fighter series, leading to the PZL P.7, PZL P.11 and PZL P.24.
The PWS-21 was a Polish passenger aircraft for 4 passengers, built in PWS factory in 1930, that remained a prototype.
The PWS-20 was a Polish single-engine high-wing 8 passenger airliner, built in the PWS factory and when it made its first flight in 1929 it became the first Polish-designed transport aircraft to fly.
The P.W.S.8 was a 1930 Polish sports plane, constructed by the Podlaska Wytwórnia Samolotów (PWS), that remained a prototype.
The PWS-51 was a Polish sports plane of 1930, a single-engine low-wing monoplane, constructed by the Podlaska Wytwórnia Samolotów (PWS), that remained a prototype.
The Tebaldi-Zari was an Italian fighter prototype of 1919. The Breda company later acquired the rights to it.
The PWS-5 or PWS-5t2, was a multi-seated Polish liaison aircraft, developed in 1928 by PWS.
The PWS-6, was a Polish liaison aircraft, developed in 1930 by the PWS, that remained a prototype.
The PWS-11 was a Polish aerobatic and trainer aircraft, developed in 1928-1929 by PWS, which remained a prototype.
The PWS 3 was a Polish sport aircraft, developed in 1927 by PWS, which remained a prototype.
The Hispano Suiza E-30, later renamed Hispano E-30, was designed in Spain in 1930 as a multi-purpose intermediate trainer. It was a single engine, parasol wing monoplane. About 25 served with the Spanish armed forces until 1945.
PZL P.8 was a Polish fighter aircraft designed by Zygmunt Puławski, from the family of fighters with Polish wing, developed and produced by Państwowe Zakłady Lotnicze (PZL) in the early 1930s.
The Loire-Nieuport 161 was a single-seat, single-engine, all-metal, low-wing monoplane fighter designed and built in France in 1935 to compete for a government contract. Accidents delayed its development and only three prototypes were completed.
Samolot Sp.I was a type of aircraft designed in Poland in the mid-1920s. It was intended to explore the characteristics of a proposed single seat fighter. The project did not receive government support and only one Sp.I was built.