Bend stiffener

Last updated

A bend stiffener is a type of cable protection system. They are conically shaped polyurethane mouldings designed to add local stiffness to a riser, flowline, cable or umbilical. They limit the bending stresses and curvature to acceptable levels. [1] They are used in the oil and gas industry as part of offshore deep sea drilling operations.


Related Research Articles

Bowden cable

A Bowden cable is a type of flexible cable used to transmit mechanical force or energy by the movement of an inner cable relative to a hollow outer cable housing. The housing is generally of composite construction, consisting of an inner lining, a longitudinally incompressible layer such as a helical winding or a sheaf of steel wire, and a protective outer covering.

Shroud knot

The shroud knot is a multi-strand bend knot used to join two ends of laid rope together. Shroud knots, in general, are a class of knots in which the individual strands of laid rope are knotted, but not woven, to the individual strands of another laid rope. This makes them more secure than a simple bend but less secure than a full splice.

In corsetry, a bone is one of the rigid parts of a corset that forms its frame and gives it rigidity. The purpose of the boning in a corset varies slightly from era to era. Generally, the cinching/shaping properties of corsetry puts strain onto the fabric from which the corset is made. The boning supports the desired shape and prevents wrinkling of the corset fabric. Bones, and the substances used for the purpose, are generically called "boning"; however, the name likely arises from the use of whalebone in early corsets.

Plate girder bridge Type of bridge

A plate girder bridge is a bridge supported by two or more plate girders.

Bend radius

Bend radius, which is measured to the inside curvature, is the minimum radius one can bend a pipe, tube, sheet, cable or hose without kinking it, damaging it, or shortening its life. The smaller the bend radius, the greater is the material flexibility. The diagram to the right illustrates a cable with a seven-centimeter bend radius.

The strength of ships is a topic of key interest to naval architects and shipbuilders. Ships which are built too strong are heavy, slow, and cost extra money to build and operate since they weigh more, whilst ships which are built too weakly suffer from minor hull damage and in some extreme cases catastrophic failure and sinking.

Wire rope rope made from wire

Wire rope is several strands of metal wire twisted into a helix forming a composite "rope", in a pattern known as "laid rope". Larger diameter wire rope consists of multiple strands of such laid rope in a pattern known as "cable laid".

Orthotropic deck

An orthotropic bridge or orthotropic deck is one whose deck typically comprises a structural steel deck plate stiffened either longitudinally or transversely, or in both directions. This allows the deck both to directly bear vehicular loads and to contribute to the bridge structure's overall load-bearing behaviour. The orthotropic deck may be integral with or supported on a grid of deck framing members such as floor beams and girders.

Flexible flat cable

Flexible flat cable, or FFC, refers to any variety of electrical cable that is both flat and flexible, with flat solid conductors. A flexible flat cable is a type of flexible electronics. However, the term FFC usually refers to the extremely thin flat cable often found in high-density electronic applications like laptops and cell phones.

KFXO-CD Fox affiliate in Bend, Oregon

KFXO-CD, virtual channel 39 and UHF digital channel 15, is a low-powered, Class A Fox-affiliated television station licensed to Bend, Oregon, United States and serving Central Oregon. Owned by the News-Press & Gazette Company (NPG), it is a sister station to dual NBC/CW+ affiliate KTVZ and low-powered Telemundo affiliate KQRE-LD. The three stations share studios on Northwest O.B. Riley Road in Bend; KFXO-CD's transmitter is located on Awbrey Butte west of US 97. There is no separate website for KFXO-CD; instead, it is integrated with that of sister station KTVZ.

Collar stay rigid tab of metal, plastic, horn, or baleen inserted into a collar point to hold it in place

A collar stay, collar stick, collar tab, collar stiffener, or collar stiff is a shirt accessory consisting of a smooth strip of rigid material, rounded at one end and pointed at the other, inserted into specially made pockets on the underside of a shirt collar to stabilize the collar's points. The stays ensure that the collar lies flat against the collarbone, looking crisp and remaining in the correct place.

Steel plate shear wall

A steel plate shear wall (SPSW) consists of steel infill plates bounded by boundary elements.

Hulme Arch Bridge

The Hulme Arch Bridge in Hulme, Manchester, England, supports Stretford Road as it passes over Princess Road, and is located at grid reference SJ838968. The construction of the bridge formed part of the regeneration of the Hulme district of Manchester, both by re-establishing the former route of Stretford Road, which had been cut into two halves by the construction of Princess Road in 1969, and by providing a local landmark. The location was previously occupied by a footbridge.

Process duct work conveys large volumes of hot, dusty air from processing equipment to mills, baghouses to other process equipment. Process duct work may be round or rectangular. Although round duct work costs more to fabricate than rectangular duct work, it requires fewer stiffeners and is favored in many applications over rectangular ductwork.

KBNZ-LD CBS affiliate in Bend, Oregon

KBNZ-LD, virtual and VHF digital channel 7, is a low-powered CBS-affiliated television station licensed to Bend, Oregon, United States and serving Central Oregon. Owned by the Zolo Media subsidiary of BendBroadband, it is a sister station to ABC affiliate KOHD. The two stations share studios on Lower Meadow Drive in Bend; KBNZ-CD's transmitter is located in the city on Awbrey Butte west of US 97. The station can also be seen on BendBroadband channel 6 and in high definition on digital channel 606.

<i>The Legend of Korra</i> (season 1) the first season of The Legend of Korra animated television series

Book One: Air is the first season of the U.S. animated TV series The Legend of Korra created by Michael Dante DiMartino and Bryan Konietzko. Consisting of twelve episodes, it was initially intended to be a stand-alone miniseries before the series was expanded to four seasons ("books") and fifty-two episodes ("chapters") total. Book One: Air aired from April 14 to June 23, 2012, on the Nickelodeon channel in the U.S., and is broadcast in other countries beginning in June 2012.

BendBroadband is a cable television and internet provider in the U.S. state of Oregon. Based in Bend, it serves Central Oregon and also owns several television stations and a data center. As of September 2014, the company became a wholly owned subsidiary of Telephone and Data Systems, Inc. [NYSE: TDS], a Fortune 500 company.

Benders is an American comedy television series created by Tom Sellitti and Jim Serpico. On March 31, 2015, the series was ordered by IFC. The series premiered on IFC on October 1, 2015. On December 30, 2015, the series was canceled by IFC.

A cable protection system (CPS) protects subsea power cables against various factors that negatively impact on the cable lifetime, normally used when entering an offshore structure. When a subsea power cable is laid, there is an area where the cable can be subjected to increased dynamic forces, which the cable is not necessarily designed to survive over the lifetime of the installation.

References

  1. "Bend Stiffeners". www.abcosubsea.com. Retrieved May 9, 2013.[ permanent dead link ]