| Cirrus Minor | |
|---|---|
 | |
| Blackburn Cirrus Minor 2A | |
| Type | Air-cooled 4-cylinder inline piston engine |
| National origin | United Kingdom |
| Manufacturer | Blackburn Aircraft |
| First run | 1937 |
The Blackburn Cirrus Minor is a British four-cylinder, inverted, in-line air-cooled aero-engine that was designed and built by the Cirrus Engine Section of Blackburn Aircraft Limited in the late 1930s.
The Cirrus Minor started life as a clean-sheet replacement for the original Cirrus and Hermes series of light aircraft engines. Design was led by Technical Director C. S. Napier, son of Montague Napier, and was already under way when in 1934 Cirrus-Hermes Engineering was taken over by the Blackburn Aeroplane & Motor Company and moved to Brough in Yorkshire. [1] [2]
Napier remained Technical Director and, while he completed the development and initial sales of the Cirrus Minor and its larger stablemate the Cirrus Major, Blackburn kept Cirrus Hermes Engineering as a separate company (though without the hyphen in its name). [2]
Although completely new designs, they were of generally similar layout to the previous inverted engines, being air-cooled inverted four-cylinder inline designs. Like the others the Minor had a robust steel five-bearing crankshaft, but unlike them the long studs bolting the cylinder heads to the crank housing were replaced by short studs and flanges at each end of the cylinder barrels. Light alloy was used for the cylinder heads and con rods, while the valve gear was adopted with little change from the Hermes IV. The Claudel-Hobson down-draught carburetter featured independent altitude control, and the dual-redundant magnetos were of B.T.H. S.G.4/2 type. [1]
The Cirrus Minor was introduced in 1935. Two years later, Cirrus Hermes Engineering lost its identity as a separate company and was adopted as an operating division of its parent company, which by then had become Blackburn Aircraft.
The Minor was known for excellent reliability, and had a major "win" when it was selected to power the RAF's Taylorcraft Auster observation aircraft. The RAF's version had several modifications, known as the Series I. Although externally identical, the Series II engine was redesigned to operate on 77 octane fuel, as opposed to the original's 70, increasing power to 100 hp (75 kW).
Data fromLumsden [4]
Related development
Comparable engines
Related lists
The Bristol Perseus was a British nine-cylinder, single-row, air-cooled radial aircraft engine produced by the Bristol Engine Company starting in 1932. It was the first production sleeve valve aero engine.
The de Havilland Gipsy Major or Gipsy IIIA is a four-cylinder, air-cooled, inverted inline engine used in a variety of light aircraft produced in the 1930s, including the famous Tiger Moth biplane. Many Gipsy Major engines still power vintage aircraft types.
The Cirrus and Hermes or Cirrus-Hermes are a series of British aero engines manufactured, under various changes of ownership, from the 1920s until the 1950s. The engines were all air-cooled, four-cylinder inline types, with earlier ones upright and later designs inverted.
The de Havilland Gipsy is a British air-cooled four-cylinder in-line aircraft engine designed by Frank Halford in 1927 to replace the ADC Cirrus in the de Havilland DH.60 Moth light biplane. Initially developed as an upright 5 litre capacity engine, later versions were designed to run inverted with increased capacity and power.
The Walter Mikron is a four-cylinder, air-cooled, inverted straight engine for aircraft.
The Walter Minor is a family of four- and six-cylinder inverted inline air-cooled engines, developed under auspices of ing. Šimůnek and used on light aircraft. First produced in 1929, the Minor engines' family has an advanced design for the period and sports steel cylinders, aluminum heads and overhead valves, with identical bore and stroke of 105 mm (4.1 in) and 115 mm (4.5 in), respectively. Typical power ratings varied from 105 to 160 hp.
The Hirth HM 504 is a four-cylinder air-cooled inverted inline engine. The HM 504 was a popular engine for light aircraft of the 1930s-1940s, and it was used to power a number of Germany's trainer aircraft of World War II. The engine featured a cast magnesium alloy crankcase made of Elektron The Hitachi Hatsukaze Model 11 was a Japanese licensed version.
The Blackburn Cirrus Major is a British, inline-four aircraft engine that was developed in the late 1930s.
The Hirth HM 60 was a four-cylinder inverted air-cooled inline aircraft engine designed in 1923 and first sold in 1924. The engine was of very high quality, and its sales success contributed to Hirth's rapid pre-war expansion. It was a popular engine for light aircraft delivering 80 hp (60 kW) at 2,300 rpm. Later Hirth engines built upon the HM 60's success and provided greater power with many of the same design features.
The Armstrong Siddeley Tiger was a British 14-cylinder air-cooled aircraft radial engine developed by Armstrong Siddeley in the 1930s from their Jaguar engine. The engine was built in a number of different versions but performance and dimensions stayed relatively unchanged. The Tiger VIII was the first British aircraft engine to use a two-speed supercharger.
The Napier Dagger was a 24-cylinder H-pattern (or H-Block) air-cooled engine designed by Frank Halford and built by Napier before World War II. It was a development of the earlier Napier Rapier.
The Napier Rapier was a British 16-cylinder H pattern air-cooled aero engine designed by Frank Halford and built by Napier & Son shortly before World War II.
The ADC Cirrus is a series of British aero engines manufactured using surplus Renault parts by the Aircraft Disposal Company (ADC) in the 1920s.
The de Havilland Gipsy Minor or Gipsy Junior is a British four-cylinder, air-cooled, inline engine that was used primarily in the de Havilland Moth Minor monoplane, both products being developed in the late 1930s.
The Blackburn Cirrus Bombardier was a British four-cylinder inline aircraft engine, developed and built by the Blackburn Aircraft company in the mid-1950s. The engine featured fuel injection.
The ADC Airdisco is a British V-8 aero engine that first ran in 1925.
The Blackburn Cirrus Midget was a British four-cylinder, inverted, inline air-cooled aero engine designed and built in 1937 by the Cirrus Engine Section of Blackburn Aircraft Limited. Little is known of its development and use, its sole aircraft application being reported as the Chilton D.W.1 although it is possible that this did not transpire.
The de Havilland Ghost was a British V-8 aero engine that first ran in 1928.
The Renault 80 hp, or Type WS in British service, was a V-8 aero engine that first ran in 1914. The engine was manufactured in Britain by Renault Limited of West Brompton, London between August 1914 and December 1918, seven other companies, including Rolls-Royce and Brazil Straker, also produced the engine. The Renault V-8 engines were noted as inefficient but reliable, the inefficiency being mainly due to the excessively rich fuel/air mixture used to assist cooling.
The Hirth HM 500 was a German four-cylinder air-cooled inverted inline engine developed from the Hirth HM 504 in 1938. Although developing the same output of the HM 504 (105 hp) and keeping the same capacity and bore, the HM 500 was a very different engine; the new HM 500 had a one-piece "closed" crankcase for simplified manufacture. The new cooling system reduced cylinder temperatures considerably, and the fuel consumption was also reduced. The HM 500 carried a twin-magneto instead of the two separate magnetos as on the old HM 504. All these changes made that the HM 500 resulted a 12% lighter than the HM 504 and the front surface 37% less than the previous HM 504.
