 | |
| Founded | June 5, 1958 |
|---|---|
| Founder | Dick Fisher |
| Headquarters | , |
| Products | Fiberglass boats |
| Parent | Brunswick Boat Group |
Boston Whaler is an American boat manufacturer. It is a subsidiary of the Brunswick Boat Group, a division of the Brunswick Corporation. Boston Whalers were originally produced in Massachusetts, hence the name, but today are manufactured in Edgewater, Florida.
Richard "Dick" Fisher graduated from Harvard University in 1936. He ran a company building small, lightweight boats out of balsa wood. He designed a rowboat and got the materials to build it, but he never completed it.
In the 1950s, polyurethane foam, a stiff, lightweight, buoyant material, was invented. Fisher imagined it as a replacement for the lightweight balsa used in small boat construction, and in 1954 he constructed a small sailing dinghy filled with the foam, with a design similar to the Sunfish. He showed the finished product to his friend, naval architect C. Raymond Hunt. Hunt recognized potential in the process, however he did not feel the design was particularly suited to sailboats. Instead, he created a design based on the Hickman Sea Sled featuring a cathedral hull.
Fisher built a prototype out of Styrofoam and Epoxy. "It had two keels," said Fisher, "one inverted V between the runners and an anti-skid, anti-trip chine." Fisher tested the boat all that summer and thought it was “the greatest thing ever”. That fall, Fisher started running the boat in rough weather, and found that the hull displayed issues with handling and cavitation. Under heavy load, and off-plane, the cavity in the middle of the hull forced air into the water, and then back into the prop. Fisher approached Hickman, the original designer of the wooden Sea Sled for a solution. However, Hickman thought his design needed no modifications. Fisher contemplated putting "some stuff on the bottom to move that airy water out of there." He used a method of trial and error, laying fiberglass on the bottom of the hull in the morning and running the boat behind his house when the glass cured. If the design did not work, he would bring it back to his house and start over.
This prototype boat began to have a slight V bottom and the two runners on the sides. Fisher then approached Hunt to examine the design changes. Hunt added his own design changes to the prototype; most notably, a third runner in the center of the hull. Fisher then built a prototype based on this new design to serve as a plug for the production mold.
Fisher and Hunt then took the boat on sea trials. One of these tests was to run the 13-foot (4.0 m) boat from Cohasset, Massachusetts to New Bedford and back, which is roughly 120 miles (190 km). During these sea trials, Fisher found another small flaw in the boats design: it was "wetter than hell." "A lot wetter," he said, "than the other boat had been." The reason for this, according to him, was the 9-inch-wide (23 cm) sole throwing spray into the boat. [1] Since the mold was already made, it was modified by adding to the flat center between the three chines, turning it into a V-shape. In 1956, this design became the original Boston Whaler 13.
In 1958, boats made by the Fisher-Pierce manufacturing company were first marketed and sold under the brand name Boston Whaler. The boat was very stable and had great carrying capacity. These two features, along with great performance and rough weather handling made it very desirable. Also since the Whaler was so light in weight compared to the other boats at the time, it could be propelled by lower horsepower engines. [2] Thru the late 1980s, the classic 13 ft 4 in (4.06 m) Whaler, and the 16 ft 7 in (5.05 m)Montauk were the most popular models in terms of sales. Gradually though the company moved away from these designs to a more conventional deep-vee hull, and after 1996 no more of the classic tri-hull boats were manufactured.
In 1969 the Boston Whaler boat operation of Fisher-Pierce was sold to the CML Group, whose portfolio would eventually include brands such as NordicTrack and The Nature Company. In 1989, amidst financial problems, the CML Group sold Boston Whaler to the Reebok Corporation, where, despite several advertising campaigns and new hull designs, it did relatively poorly, and was sold to Meridian Sports in 1994. Two years later in 1996 Brunswick Corporation purchased Boston Whaler for $27.4 million in cash and debt.
While Boston Whalers are primarily seen[ where? ][ by whom? ] as recreational boats, Brunswick Boats maintains a commercial division that sells Boston Whalers to coast guard and naval units worldwide. Boston Whalers were used in the Vietnam War by both the Navy SEALs and the United States Coast Guard in rescue and river patrol missions. [3]
Current production models range in length from 11.3 to 42.5 feet (3.4 to 13.0 meters). Brunswick also owns Mercury Marine; as a result, new Boston Whalers, like all other Brunswick boats, ship from the factory already equipped with Mercury engines. Models include:
| Name | Length | Layout | Min HP | Max HP |
|---|---|---|---|---|
| Tender | 11.3 feet (3.4 m) | Skiff | 5 | 15 |
| Sport | <11.3 feet (3.4 m) | Skiff | 5 | 25 |
| Super Sport | 13 feet (4.0 m) | Skiff | 25 | 40 |
| Super Sport | 16 feet (4.9 m) | Skiff | 75 | 90 |
| Montauk | 15.4 feet (4.7 m) | Center Console | 40 | 60 |
| Montauk | 17.3 feet (5.3 m) | Center Console | 90 | 115 |
| Montauk | 19.3 feet (5.9 m) | Center Console | 115 | 150 |
| Montauk | 21.3 feet (6.5 m) | Center Console | 150 | 200 |
| Dauntless | 17 feet (5.2 m) | Center Console | 90 | 115 |
| Dauntless | 18 feet (5.5 m) | Center Console | 135 | 150 |
| Dauntless | 21 feet (6.4 m) | Center Console | 150 | 200 |
| Dauntless | 24.6 feet (7.5 m) | Center Console | 250 | 350 |
| Dauntless | 27.8 feet (8.5 m) | Center Console | 350 | 600 |
| Outrage | 18.8 feet (5.7 m) | Center Console | 115 | 200 |
| Outrage | 23 feet (7.0 m) | Center Console | 250 | 350 |
| Outrage | 25.4 feet (7.7 m) | Center Console | 350 | 450 |
| Outrage | 28 feet (8.5 m) | Center Console | 500 | 800 |
| Outrage | 33 feet (10 m) | Center Console | 500 | 800 |
| Outrage | 35.7 feet (10.9 m) | Center Console | 750 | 1,200 |
| Outrage | 38 feet (12 m) | Cuddy Cabin | 900 | 1,600 |
| Outrage | 42.5 feet (13.0 m) | Cuddy Cabin | 1,200 | 1,675 |
| Vantage | 23 feet (7.0 m) | Center Console | 250 | 350 |
| Vantage | 28 feet (8.5 m) | Center Console | 400 | 600 |
| Vantage | 33.5 feet (10.2 m) | Cuddy Cabin | 500 | 800 |
| Conquest | 27.8 feet (8.5 m) | Cuddy Cabin | 450 | 500 |
| Conquest | 32.2 feet (9.8 m) | Cuddy Cabin | 600 | 800 |
| Conquest | 36 feet (11 m) | Cuddy Cabin | 750 | 1,200 |
| Conquest | 41.3 feet (12.6 m) | Cuddy Cabin | 1,200 | 1,600 |
| Realm | 35.5 feet (10.8 m) | Cuddy Cabin | 750 | 1,200 |
| Realm | 38 feet (12 m) | Cuddy Cabin | 1,200 | 1,600 |
| Name | Based On | Length | Layout | Min HP | Max HP | Status |
|---|---|---|---|---|---|---|
| Guardian | Montauk | 15 feet (4.6 m) | Center Console | 40 | 60 | defunct |
| Guardian | Montauk | 17 feet (5.2 m) | Center Console | 80 | 100 | defunct |
| Guardian | Outrage | 18 feet (5.5 m) | Center Console | 90 | 200 | defunct |
| Guardian | Outrage | 19 feet (5.8 m) | Center Console | 115 | 200 | defunct |
| Guardian | Outrage | 21.3 feet (6.5 m) | Center Console | 85 | 240 | current |
| Guardian | Outrage | 25.6 feet (7.8 m) | Center Console | 115 | 300 | current |
| Guardian | Outrage | 27 feet (8.2 m) | Center Console | 300 | 600 | defunct |
| Justice | Conquest | 20 feet (6.1 m) | Center Console | 135 | 250 | defunct |
| Justice | Conquest | 25.41 feet (7.74 m) | Center Console | 200 | 400 | current |
| Justice | Conquest | 28.41 feet (8.66 m) | Center Console | 400 | 500 | current |
| Justice | Conquest | 32 feet (9.8 m) | Center Console | 400 | 600 | defunct |
| Justice | Conquest | 37 feet (11 m) | Center Console | 750 | 900 | defunct |
| Challenger | Conquest | 27 feet (8.2 m) | Cuddy Cabin | 300 | 600 | defunct |
| Challenger | Conquest | 35 feet (11 m) | Cuddy Cabin | 300 | 600 | defunct |
| Vigilant | Conquest | 27 feet (8.2 m) | Cuddy Cabin | 400 | 450 | defunct |
| Protector Impact | 25 feet (7.6 m) | Center Console | 450 | current | ||
| Protector Impact | 30.3 feet (9.2 m) | Center Console | 900 | current | ||
Boston Whaler has, for many years, sawn boats in half to illustrate their durability, performance, smooth ride and "unsinkability". The original 1961 Life magazine ad pictured Dick Fisher sitting in a floating 13-foot (4.0 m) Whaler with a crosscut saw halfway through the hull. [5] After the cut was completed, Fisher used the stern section to tow the bow section back to shore. Modern Whaler advertising uses a chain saw. Due to the foam core construction, the Whaler will remain afloat when sawed completely in half. [6] Boston Whaler boats also remain afloat when completely swamped (full of water). Because of these attributes, Boston Whaler's trademarked sales line is "the unsinkable legend."
Today, this "unsinkable" attribute is not exclusive to Boston Whalers. All motorboats (and certain other boat types) under 20 feet (6.1 m), manufactured for sale in the United States are required by law to have positive flotation, such that a completely swamped boat will still float. [7] This is accomplished through the use of closed cell foam, or other non-permeable material. Boston Whaler, however, does claim to exceed the Coast Guard requirements. [8]
Designs
Other
A hull is the watertight body of a ship, boat, submarine, or flying boat. The hull may open at the top, or it may be fully or partially covered with a deck. Atop the deck may be a deckhouse and other superstructures, such as a funnel, derrick, or mast. The line where the hull meets the water surface is called the waterline.
A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture.
The Buccaneer 18, also called the Buccaneer dinghy and the Gloucester 18, is an American planing sailing dinghy that was designed in 1966 by Rod Macalpine-Downie and Dick Gibbs as a one-design racer and day sailer. The prototype was first shown in 1967 at Yachting's "One of a Kind" Regatta, in which it placed second.
The Mutineer 15 is a 15-foot (4.6 m) long fractional sloop sailboat currently manufactured by Nickels Boat Works. It has a dinghy centerboard hull, no ballast, and displaces 410 pounds. The Mutineer 15 has a 6-foot (1.8 m) beam, maximum draw of 4.08 feet (1.24 m), and has 150 square feet (14 m2) of sail area. The Mutineer 15 is commonly used for both day sailing and class racing. The Mutineer 15 can be comfortably sailed as a day sailer with a crew of four, but can also be raced with a crew of two, or even single-handed by semi-experienced to experienced sailors.
A tunnel hull is a type of boat hull that uses two typically planing hulls with a solid centre that traps air. This entrapment then creates aerodynamic lift in addition to the planing (hydrodynamic) lift from the hulls. Many times this is attributed to ground effect. Theoretical research and full-scale testing of tunnel hulls has demonstrated the dramatic contributions of 'close-proximity ground effect' on enhanced aerodynamic lift/drag in operation of performance tunnel hull designs.
William Albert Hickman was a Canadian designer and manufacturer of innovative fast boats. He is best known as the inventor of the Hickman Sea Sled.
A rescue lifeboat is a boat rescue craft which is used to attend a vessel in distress, or its survivors, to rescue crew and passengers. It can be hand pulled, sail powered or powered by an engine. Lifeboats may be rigid, inflatable or rigid-inflatable combination-hulled vessels.
The rigid buoyant boat (RBB) is a light-weight but high performance and high capacity boat. Based on the concept of a Rigid-hulled inflatable boat (RHIB), it has a tube/sponson manufactured from a solid material such as moulded polyethylene or aluminium and therefore being much more robust than the fabrics commonly used. Boats with foam filled collars such as the secure all-around flotation equipped (SAFE) boats employed by the US Coast Guard can also be classified as Rigid Buoyant Boats rather than "true" RHIBs as the collar is solid foam rather than inflated. The handling tends to be very similar to a RHIB; likewise they will remain afloat (buoyant) even if completely flooded. Aluminium RBBs tend to be bespoke or low-volume products whilst the tooling cost of rotomolded polyethylene boats tends to require these to be higher volume products. At least three manufacturers are producing rotomolded boats of this type. One supplier has demonstrated the robustness of the boats by dropping one from a crane onto a concrete car park. The U.S. Navy’s small unit riverine craft and the Coast Guard’s Defender class 25-foot (7.6 m) boats are examples of RBBs. Some boat builders make RBB's as workboat from HDPE sheets welded together. Similar deep V-hull can be made for good seakeeping. If buoyancy chambers are filled the hull becomes truly unsinkable and extremely indestructible making the RBB very suitable for rough conditions.
Wahoo! was a United States–based corporation which built fiberglass recreational boats from 1985 to 1996. Wahoo! boats were built in Hanover Industrial Park, near Ashland, Virginia.
The West Wight Potter 15 is an American trailerable sailboat that was designed by Stanley T. Smith and Herb Stewart as a cruiser and first built in 1979.
The Gougeon 32 is an American trailerable catamaran that was designed by Jan Gougeon and first built in 1990.
The West Wight Potter 19 is an American trailerable sailboat that was designed by Herb Stewart as a cruiser and first built in 1971.
The Sirius 20, 21 and 22 are a family of Canadian trailerable sailboats that was designed by Hubert Vandestadt for cruising and first built in 1976.
The Rebel 16 is an American sailing dinghy that was designed by Ray Greene and Alvin Youngquist as a one-design racer and first built in 1948.
The Holder 17 is an American trailerable sailboat that was designed by Ron Holder as a pocket cruiser and day sailer and first built in 1982.
The Clipper 21, also called the Clipper Marine 21 and the Clipper Mark 21, is an American trailerable sailboat that was designed by William Crealock and first built in 1971.
{{Infobox sailboat specifications | name = Harpoon 6.2 | insignia = | insignia size = | insignia alt = | insignia caption = | line drawing = | line size = | line alt = | line caption = | image boat = | image size = | image alt = | image caption = | designer = [[C&C Design ]] | architect = | location = United States | year = 1979 | no built = 150 | design = | class = | brand = | builder = Boston Whaler | role = Racer | boats = | crew = | trapeze = | draft = 3.50 ft (1.07 m) | air draft = | displacement = 1,700 lb (771 kg) | hulls = | hull type = monohull | construction = fiberglass | loa = 20.33 ft (6.20 m) | loh = | lwl = 15.83 ft (4.82 m) | beam = 8.00 ft (2.44 m) | hull draft = | hull weight = | engine = outboard motor | appendages = | keel type = fin keel | ballast = 550 lb (249 kg) | rudder type = transom-mounted rudder | rigs = | rig type = Bermuda rig | I = 19.25 ft (5.87 m) | J = 7.67 ft (2.34 m) | P = 22.50 ft (6.86 m) | E = 10.25 ft (3.12 m) | mast length = | rig other = | sails = | sailplan = fractional rigged sloop | sailarea main = 115.31 sq ft (10.713 m2) | sailarea headsail = 73.82 sq ft (6.858 m2) | sailarea spin = | sailarea gen = | sails other = | sailarea upwind = | sailarea downwind = | sailarea total = 189.14 sq ft (17.572 m2) | rating = | d-pn = | rya-pn = | phrf = 234 | status = | previous = | successor = }}
The Ranger 24 is an American trailerable sailboat that was designed by Raymond H. Richards as an International Offshore Rule Quarter Ton class racer-cruiser and first built in 1974.
The Sea Pearl 21 is an American trailerable sailboat or sailing dinghy, that was designed by Ron Johnson as a daysailer and first built in 1982.
The Venture 22 is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1968.
| People |  | |
|---|---|---|
| Subsidiaries | ||
| Joint ventures |
| |