 | |
| Manufacturer | George Brough Ltd, Haydn Road, Nottingham, England |
|---|---|
| Production | 1938–1939 |
| Engine | 996 cc Four cylinder (doubly opposed) OHV |
| Wheelbase | 1,500 mm (58 in) |
| Fuel capacity | 4.5 imp gal (20 l; 5.4 US gal) |
The Brough Superior Golden Dream was designed and built by George Brough in Nottingham, England, in 1938. With its distinctive gold finish, this was to be the ultimate Brough Superior but production was stopped by the outbreak of War in 1939. [1]
Designed as a team effort by Brough, 'Ike' Hatch, and Freddie Dixon, the engine has two horizontally opposed flat twins one above the other and geared together, thus rotating counter to each other forming an H engine. Connecting rods from opposed cylinders were of the fork and blade type and thus shared a common crank pin. All pistons moved in unison, that is to the left or to the right at the same time. The pistons could thus be counterweighted 100% yielding a perfect balance. Primary, secondary and higher-order sources of vibration canceled each other, as did the gyroscopic effects from each crankshaft. [2] [3] [4] [5]
George Brough described it a "flat vertical" engine. The four cylinders were 68 mm × 68 mm (2.7 in × 2.7 in) equating to 988 cc, with the camshafts gear-driven. Further development work was done on the engine, reconfiguring it as 71 mm × 63 mm (2.8 in × 2.5 in) (998cc), [1] with chain-driven camshafts. [2]
The engine was a four stroke engine. [6]
The frame was designed to accommodate the unusual engine and was welded together with a fully sprung plunger type springing for the rear wheel, unlike the cantilever swingarm suspension on the Brough Superior SS100. [2] The forks were Brough Superior's "Castle" forks [2] derived from a Harley-Davidson design, and many components such as the petrol tank, saddle and wheels were the same as standard Brough Superior machines.
The Dream had optional three or four speed transmission, manufactured to Brough's own design by David Brown Ltd. of Huddersfield. The final shaft drive had an underslung worm and pinion gear on the rear axle and the propeller shaft was enclosed in a tube.
The Golden Dream was exhibited at the Earls Court motorcycle show in London in 1938. [2] Five Golden Dreams were produced during 1939 and another model was planned for exhibition at Olympia; but World War II was declared in September 1939 and the Brough works were turned over to the war effort, making components for Rolls-Royce. Brough Superior never returned to motorcycle production. [1] [7]
At least one Dream is running and is owned by John Wallis (the chairman of the Brough Superior Club, Nottingham, England). [8] Two others are under restoration.[ citation needed ] [5]
A Brough Superior Dream was on display at the British National Motorcycle Museum. [5] Like many exhibits it was destroyed in a fire in 2003 but has since been largely restored, although it has never run, as there are no internals in the engine or gearbox.
A V-twin engine, also called a V2 engine, is a two-cylinder piston engine where the cylinders share a common crankshaft and are arranged in a V configuration.
An H engine is a piston engine comprising two separate flat engines, most often geared to a common output shaft. The name "H engine" is due to the engine blocks resembling a letter "H" when viewed from the front. The most successful "H" engine in this form was the Napier Dagger and its derivatives. The name was also applied to engines of the same basic layout, but rotated through 90 degrees—most famously the Napier Sabre series. A variation on the "H" theme were the Fairey Prince (H-16) & Fairey P.24 Monarch, where the two engines retained separate drives, driving Contra-rotating propellers through separate concentric shafts. Although successful, they only existed in prototype form.
Brough Superior motorcycles, sidecars, and motor cars were made by George Brough in his Brough Superior works on Haydn Road in Nottingham, England, from 1919 to 1940. The motorcycles were dubbed the "Rolls-Royce of Motorcycles" by H. D. Teague of The Motor Cycle newspaper. Approximately 3048 motorcycles were made in the 21 years of production; around a third of that production still exists. T. E. Lawrence owned eight of these motorcycles and died from injuries sustained when he crashed number seven; the eighth was on order. Moving forward to 2008, vintage motorcycle enthusiast Mark Upham acquired the rights to the Brough Superior name. In 2013 he met motorcycle designer Thierry Henriette and asked him to design a new Brough Superior motorcycle. Three months later a prototype of a new SS100 was shown in Milan.
The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.
The Kawasaki Z650 was produced as a 652 cc (39.8 cu in) standard motorcycle by Kawasaki from 1976 until 1983. It had a four-cylinder four-stroke, DOHC, air-cooled, wet sump engine positioned across the frame with two valves per cylinder and a five-speed gearbox. Designed as a middleweight version of the Kawasaki Z900, the similar-styling had "an attenuated version of the traditional Kawasaki tail fairing". It competed in the market against the smaller SOHC Honda CB650. The Z650 was the epitome of the "Universal Japanese Motorcycle" (UJM).
Brough Motorcycles were made by William E. Brough in Nottingham, England, from 1902 to 1926, after some earlier experimentation with motorised tricycles. The Brough Superior company was a separate company created by his son, George Brough.
The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.
Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.
A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.
Wooler was a British manufacturer of motorcycles and automobiles, founded by engineer John Wooler in 1911 based in Alperton, Middlesex. The company became known for its unconventional designs which included several fore-and-aft twins, a vertical camshaft single cylinder machine, a transverse-four beam engine, and a transverse flat four. Most machines possessed Wooler's enduring design features of a petrol tank which extended past the steering head.
The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 180-degree firing order as is mounted with one cylinder horizontal.
Matchless Silver Hawk is a Bert Collier designed motorcycle produced by Matchless for 1931 and introduced at the 1930 Motorcycle Show at Olympia, London as their range-leading luxury model. It was one of two up-market four-cylinder machines introduced during the 1930 Show season from two manufacturers; the Silver Hawk whose production would last less than four years and the Ariel Square Four, whose production lasted until 1959. Other British manufacturers produced 4-cylinder machines in small quantities in the 1930s, including Brough Superior's Austin-engined BS4 and the prototype Golden Dream.
For the WWII-era motorcycle, see BMW R75
Motorcycle components and systems for a motorcycle are engineered, manufactured, and assembled in order to produce motorcycle models with the desired performance, aesthetics, and cost. The key components of modern motorcycles are presented below.
BMW Motorrad is the motorcycle brand of BMW, part of its Corporate and Brand Development division. It has produced motorcycles since 1923, and achieved record sales for the fifth year in succession in 2015. With a total of 136,963 vehicles sold in 2015, BMW registered a growth of 10.9% in sales in comparison with 2014. In May 2011, the 2,000,000th motorcycle produced by BMW Motorrad was an R1200GS.
The Moto Guzzi Le Mans is a sports motorcycle first manufactured in 1976 by Italian company Moto Guzzi. It was named after the 24-hour motorcycle endurance race at Le Mans in France. The Le Mans designation was first used for an 850 prototype, based on the V7, displayed at Premio Varrone in late 1972.
The Britten V1000 is a handbuilt race motorcycle designed and built by John Britten and a group of friends in Christchurch, New Zealand during the early 1990s. The bike went on to win the Battle of the Twins in Daytona International Speedway's Daytona Bike Week festivities in the United States and set several world speed records.
The Moto Guzzi Triporteurs were wheeled transport motorcycles (triporteurs) of the Moto Guzzi brand. In Italy, they were called "Moto Carri".
Windhoff motorcycles were built by Windhoff Motorradenbau GmbH in Berlin, Germany from 1924-1933.
The MV Agusta 750 Sport America was a motorcycle manufactured by the MV Agusta company from 1975 to 1977. Derivative models were produced in limited numbers until 1982, and the Magni models are still available to special order.
