CFAV Otter (YAG 312)

Last updated

History
Naval ensign of Canada.svg Canada
Operator Royal Canadian Navy
BuilderStar Shipyard (Mercer's)
In service1954-2007
Homeport CFB Esquimalt
IdentificationYFM-312 (1955); YFP-312 (1960); YAG-312 (1978); YAG-312 "Lynx" (1980)
StatusSold in 2011 to private owners
General characteristics
TypeTraining vessel
Displacement70 tonnes (69 long tons)
Length75 ft 3 in (22.94 m)
Beam18 ft (5.5 m)
Draught2.6 m (8 ft 6 in)
Installed power Yanmar diesel generator
Propulsion2 × Detroit Diesel 6-71 series engines, 320 hp (239 kW)
Boats & landing
craft carried
Zodiac launch
Complement12 - 14

Canadian Forces Auxiliary Vessel (CFAV) Otter (YAG 312) was one of ten wooden YAG-300 (Yard Auxiliary, General) vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Otter primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt. [1] [2]

Contents

Design and layout

Like other YAG 300 vessels, Otter was 75′ long overall, 18′6″ wide, had a draft of 4′6″, measured 70 tonnes, and was powered by twin 6-71 Detroit Diesel engines. Otter was arranged in typical naval fashion with officer's housed forward with the galley and their own head, an engine room midships, and cadet room aft with 12-14 bunks in double tiers. The heads are equipped with a pump-action lever, that can be used to pump sewage into the black water treatment tanks held aboard or into the ocean water. Above decks was the wheelhouse mounted on the forward cabin's coaming; aft of that, the exposed breezeway; and, mounted on the after cabin's coaming, a Zodiac launch as well as a food locker and barbeque. Above the wheelhouse was an open bridge, fitted with a chart table and a gyrocompass repeater. A second gyro repeater was fitted on the quarterdeck. Otter was equipped with a Furuno 1831 navigation radar, with the display located in the wheelhouse.

Operational history

Built by Star Shipyard Ltd. of New Westminster, BC in 1953 she was delivered to the RCN as YFM 312 (Yard Ferry, Man) and served as a harbour ferry boat. Re-designated as YFP-312 (Yard Ferry, Personnel) in 1960, together with YAG 320 Lynx she was designated as a tender to HMCS Oriole in 1963. [3] Later designated as YAG 312 Otter, she was regrouped under the control and operation of the Small Boats Unit (SBU) at HMC Dockyard Esquimalt where she was used for seamanship and navigation training until 2007. Otter was offered for sale by the Canadian Government as part of the YAG 300 Replacement Project, which saw the YAG boats replaced by new Orca-class patrol vessels. [4] In 2011 she was sold to private owners for C$1,651.00.

Related Research Articles

<span class="mw-page-title-main">Royal Canadian Navy</span> Maritime warfare branch of Canadas military

The Royal Canadian Navy is the naval force of Canada. The RCN is one of three environmental commands within the Canadian Armed Forces. As of 2023, the RCN operates 12 frigates, four attack submarines, 12 coastal defence vessels, eight patrol-class training vessels, two offshore patrol vessels, and several auxiliary vessels. The RCN consists of 8,400 Regular Force and 4,100 Primary Reserve sailors, supported by 3,800 civilians. Vice-Admiral Angus Topshee is the commander of the Royal Canadian Navy and chief of the Naval Staff.

HMCS <i>Haida</i> Destroyer of the Royal Canadian Navy

HMCS Haida is a Tribal-class destroyer that served in the Royal Canadian Navy (RCN) from 1943 to 1963, participating in World War II and the Korean War. She was named for the Haida people.

<i>Orca</i>-class patrol vessel Canadian naval training vessels

The Orca-class patrol vessels are a class of eight steel-hulled training and surveillance vessels in service with the Royal Canadian Navy (RCN) at Patrol Craft Training Unit (PCTU) Canadian Forces Base (CFB) Esquimalt. Based on the Australian Pacific-class patrol boat design, all of the Orca vessels were constructed by Victoria Shipyards between November 2004 and November 2008. In addition to carrying the RCN designation of patrol craft training (PCT), the Orca class are not formally commissioned in the RCN and as such do not possess the His Majesty's Canadian Ship (HMCS) prefix.

HMCS <i>Eastview</i>

HMCS Eastview was a River-class frigate that served in the Royal Canadian Navy from 1944-1946. She served as a convoy escort in the Battle of the Atlantic. She was named after the Ottawa suburb of Eastview.

HMCS <i>Alberni</i> Flower-class corvette

HMCS Alberni was a Flower-class corvette that served in the Royal Canadian Navy (RCN) during the Second World War. The Flower-class corvettes were warships designed for anti-submarine warfare. The ship was constructed by Yarrows Ltd. in Esquimalt, British Columbia, laid down on 19 April 1940, launched on 22 August and commissioned on 4 February 1941. The corvette sailed east to join the RCN's fleet in the Atlantic via the Panama Canal, where upon arrival, the vessel began escorting trans-atlantic convoys in the Battle of the Atlantic. Alberni took part in the key convoy battle of Convoy SC 42. In 1942, the corvette was transferred to Allied convoy assignments associated with Operation Torch in the Mediterranean Sea. In 1944, Alberni was among the Canadian naval vessels assigned to Operation Neptune, the naval component of the invasion of Normandy and escorted support ships to and from the United Kingdom on D-day.

HMCS <i>Armentières</i> Battle-class naval trawlers

HMCS Armentières was one of twelve Battle-class naval trawlers used by the Royal Canadian Navy (RCN). Armentières entered service in 1918 near the end of the First World War on the Atlantic coast of Canada. Following the war, the ship was transferred to the Department of Marine and Fisheries for a short period before reverting to RCN service in 1923 on the Pacific coast of Canada. The ship sank in 1925, was raised and re-entered service, remaining with the fleet through the Second World War as an examination vessel at Prince Rupert, British Columbia. After the end of the war, the vessel entered mercantile service becoming A.G. Garrish in 1947, later renamed Arctic Rover in 1958, Laforce in 1962 and Polaris in 1973. The ship's registry was deleted in 1991.

YAG training vessel Series of ten wooden auxiliary vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

YAG 300 vessels were a series of ten wooden boats built between 1954 and 1955 that throughout their service acted as yard ferries, training platforms and test beds for route survey equipment with the Royal Canadian Navy (RCN).

HMCS <i>Antigonish</i> Canadian naval vessel

HMCS Antigonish was a River-class frigate that served in the Royal Canadian Navy from 1944–1946 and as a Prestonian-class frigate from 1957–1966. She is named for Antigonish, Nova Scotia. Her photo is featured on the cover of the 1994 album Frigate by the band April Wine.

HMCS <i>Kokanee</i> River-class frigate of the Royal Canadian Navy

HMCS Kokanee was a River-class frigate that served in the Royal Canadian Navy during the Second World War. She saw action primarily in the Battle of the Atlantic as a convoy escort. After the war she was sold to India and converted into a pilot vessel.

HMCS <i>New Glasgow</i>

HMCS New Glasgow was a River-class frigate that served in the Royal Canadian Navy during the Second World War and as a Prestonian-class frigate from 1955 to 1965. She was named for New Glasgow, Nova Scotia.

HMCS <i>Charlottetown</i> (1943)

HMCS Charlottetown was a River-class frigate that served with the Royal Canadian Navy (RCN) during the Second World War. She was the second vessel of the name, HMCS Charlottetown having been a Flower-class corvette that had been sunk earlier in the war. They are unique for being the only two ships to have shared the same pennant number, K 244. She was named for Charlottetown, Prince Edward Island.

HMCS <i>Beacon Hill</i>

HMCS Beacon Hill was a River-class frigate that served in the Royal Canadian Navy (RCN) as an ocean convoy escort during the Second World War. She fought primarily in the Battle of the Atlantic. In 1954 she was converted to a Prestonian-class frigate and served until 1957. She was named for Victoria, British Columbia, but because HMS Victorious was in service with the Royal Navy, the RCN, in an effort to avoid confusion, chose to honour the city by choosing another name associated with it.

HMCS <i>Swansea</i>

HMCS Swansea was a Canadian River-class frigate that was the most successful U-boat hunter in the Royal Canadian Navy during the Second World War, having a hand in the destruction of four of them. She saw service in the Battle of the Atlantic from 1943 to 1945. Following the war she was refit as a Prestonian-class frigate. She is named for Swansea, Ontario.

CFAV <i>Caribou</i> (YAG 314) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Caribou was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Caribou primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

CFAV <i>Badger</i> (YAG 319) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Badger (YAG-319) was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Badger primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

Canadian Forces Auxiliary Vessel (CFAV) Lynx was one of ten wooden YAG-300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Lynx primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt.

CFAV <i>Grizzly</i> (YAG 306) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Grizzly was one of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Grizzly primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt. Her name perpetuated the WWII armed yacht HMCS Grizzly was reused for PTC 60 GrizzlyOrca-class Patrol Craft Training (PCT) tender that replaced the YAG 300 vessels as the RCN training tenders in 2008.

CFAV <i>Cougar</i> (YAG 308) One of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955

Canadian Forces Auxiliary Vessel (CFAV) Cougar was one of ten wooden YAG 300 vessels built for the Royal Canadian Navy (RCN) between 1953 and 1955. Built for use as auxiliary craft, Cougar primarily served as an at-sea training platform for junior naval officers, boatswains, reserve personnel and Sea Cadets at Canadian Forces Base (CFB) Esquimalt. Her name was reused for PTC 61 CougarOrca-class Patrol Craft Training (PCT) tender that replaced the YAG 300 vessels as the RCN training tenders in 2008.

References

  1. "DND/CF : Backgrounder : The YAG 300 Replacement Project". 2007-03-11. Archived from the original on 2007-03-11. Retrieved 2019-12-24.
  2. "Yard Auxiliary General Info". Yard Auxiliary General. Archived from the original on 17 July 2011. Retrieved 23 December 2019.
  3. "YAG 320 (LYNX) - For Posterity's Sake". www.forposterityssake.ca. Retrieved 2019-12-28.
  4. "Canadian Navy YAG's for sale". blog.tadroberts.ca. Retrieved 2019-12-24.