Cagiva Roadster

Last updated

The Roadster 521 is a 125cc motorcycle made by the Italian motorcycle firm, Cagiva in the 1990s.

One of the fastest accelerating 125cc motorcycles of its time, the Roadster 521 is known to have a top speed of 80 mph restricted and an estimated 100 mph+ un-restricted. Achieving approximately 70 miles per gallon, it is relatively economical for a 2-stroke motorcycle.

Specification

Make Model

Cagiva Roadster 521

Number produced 329 between 1993 and 1999

Year 1993

Engine Air cooled, Single cylinder, two stroke Capacity

125 Bore x Stroke 56 x 50.6 mm

Compression Ratio 11.7:1 Induction

Ignition / Starting Electronic CDI

Max Power 15.5 hp @ 7500 rpm

Max Torque 18 Nm @ 9000 rpm

Transmission / Drive 6 Speed / chain

Front Suspension Hydraulic telescopic fork

Rear Suspension Single-shock Soft-Damp

Front Brakes Single 260mm disc

Rear Brakes 160mm drum

Front Tyre 3,25-19

Rear Tyre 140/90-15

Dry-Weight 125 kg

Fuel Capacity 11 Litres

Consumption average 22.0 km/lit

Braking 60 - 0 / 100 - 0 13.3 m / 39.9 m

Standing ¼ Mile 18.6 sec / 104.0 km/h

Related Research Articles

Formula One car Class of formula race car

A Formula One car is a single-seat, open-cockpit, open-wheel formula racing car with substantial front and rear wings, and an engine positioned behind the driver, intended to be used in competition at Formula One racing events. The regulations governing the cars are unique to the championship and specify that cars must be constructed by the racing teams themselves, though the design and manufacture can be outsourced.

Lotus Exige Car model

The Lotus Exige is a British two-door, two-seat sports car made by Lotus Cars since 2000. Originally a more-hardcore coupé version of the Lotus Elise roadster, since the Series 3 the Exige has been the larger-engined model of the family - using a V6 engine in place of the Elise's straight 4 with convertible versions of both available.

Morgan Roadster Motor vehicle

The Morgan Roadster is a model produced by the Morgan Motor Company. It was introduced in 2004 replacing the Morgan Plus 8. The car is identical to its predecessor except for new modern Ford V6 mechanicals. The new engine develops similar power, though less torque, and is slightly lighter than the Rover V8 which results in increased performance and better fuel economy. Air conditioning is now standard on U.S. models. Like its predecessor, the chassis consists of a standard ladder frame design and is built from galvanised steel with five tubular or box section cross members. The body is built of steel and aluminum around an ash frame. Suspension is traditional Morgan slider type up-front and solid axle / leaf spring at the rear.

Honda Phantom

The Honda Phantom TA200 is a single cylinder Thai-made "retro cruiser" motorcycle. It was known in Australia as the TA Shadow. Production of the TA200 was stopped in Thailand on 3 March 2010.

The Suzuki Boulevard S50 is a motorcycle manufactured by Suzuki and released in 2005 and production stopped in 2009. It features an 805 cc v-twin engine with four valves per cylinder. It was formerly named the Intruder 1985 - 1991 VS 700 (USA), 1985 VS 750 (worldwide) and VS 800.

The San Storm is a two-seat Roadster from San Motors India LTD. of India that was introduced in 1998. It was designed by the French firm, Le Mans Group. It is powered by a 1149 cc Renault D7F engine driving the front wheels giving 60 bhp (45 kW) and a top speed of 144 km/h (89 mph). It has a double-skinned, fibreglass-reinforced tubular steel body and chassis, and the weight is only 760 kg (1,676 lb) giving it a quite satisfactory power-to-weight ratio. The time from 0 to 100 km/h (62 mph) is given as 13 seconds. The San Storm is assembled in Bangalore while the engine is mated to the bodywork in Goa.

Jiotto Caspita Motor vehicle

The Jiotto Caspita is a prototype mid-engine sports car designed and manufactured by Dome in 1989. The car was billed as the "F1 on the Road." The original design of the car was done by Kunihisa Ito, who was the vice-president and chief designer of Jiotto Design Incorporated.

Harley-Davidson Sportster

The Harley-Davidson Sportster is a line of motorcycles produced continuously since 1957 by Harley-Davidson. Sportster models are designated in Harley-Davidson's product code by beginning with "XL". In 1952, the predecessors to the Sportster, the Model K Sport and Sport Solo motorcycles, were introduced. These models K, KK, KH, and KHK of 1952 to 1956 had a sidevalve engine, whereas the later XL Sportster models use an overhead valve engine. The first Sportster in 1957 had many of the same details of the KH including the frame, fenders, large gas tank and front suspension.

Moto Morini

Moto Morini is an Italian motorcycle manufacturer founded by Alfonso Morini in Bologna, in 1937.

Sidecar TT

The Sidecar TT is a motorcycle-with-sidecar road race competition held over two legs which takes place during the Isle of Man TT festival, an annual event at the end of May and beginning of June. Between 1954 and 1976 this race was part of the Grand Prix motorcycle racing world championship.

The Zongshen 250 GS, introduced in 2006, is a lightweight single-cylinder air-cooled motorcycle. Unlike its predecessor the Zongshen 200 GS, the 250 GS incorporates an OHC engine configuration. The ZS250GS is exported to countries around the world, including the United States, Australia, the Philippines, and South Africa.

The Suzuki RV125 is a motorcycle series manufactured by Suzuki from 1972 until 1982 and reintroduced as the RV125 VanVan in 2003.

Suzuki RF series Sport touring motorcycles

The Suzuki RF series are sport touring motorcycles. They came with three engine variations: 400 cc (24 cu in), 600 cc (37 cu in) and 900 cc (55 cu in). It was in production from 1994 to 1999.

Yamaha Royal Star

In 1995 Yamaha introduced the Royal Star motorcycle. This motorcycle uses the basic power package from the Yamaha Venture Royale.

Yamaha RS-100T Torque induction series, also known as RS-100 series, is a series of two-stroke motorcycle models manufactured by Yamaha Motors Co. Ltd as a successor of the Philippines' most popular 2T motorcycle/tricycle model. It debuted in 1977 especially for the Asian market. While the older Yamaha RS-100 uses a pressed steel frame that also acts as the main body, the RS-100T uses steel tubes for the frames and metal cover sets for the body.

Britten V1000

The Britten V1000 is a handbuilt race motorcycle designed and built by John Britten and a group of friends in Christchurch, New Zealand during the early 1990s. The bike went on to win the Battle of the Twins in Daytona International Speedway's Daytona Bike Week festivities in the United States and set several world speed records.

Royal Enfield Classic Motorcycle model

Royal Enfield Classic 350 and Classic 500 are models of Royal Enfield motorcycles which have been in production since 2009.

Ducati Sebring SOHC motorcycle by Ducati

The Ducati Sebring is a 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1965 to 1968. At the time of its introduction it was the largest capacity Ducati machine. Production of the original model ended in 1967 when the 'wide case' Mark 3 was introduced, although just over 200 Sebrings were made in 1968 with the 'wide case' engine. Total production was around 3,500 machines.

ClĂșa

Clúa was a Spanish motorcycle and automobile brand by Construcciones Metálicas Clúa from 1949 to 1962. The company was owned and founded by Joan Clúa i Maluquer. Its headquarters was located at 6 Avenida de Pau Casals, Barcelona, Spain, at the time called Avenida General Goded, and the assembly line was located at Carrer d'Espronceda.

The Ducati 125 Scrambler is an on/off road 124 cc (7.6 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati in 1971 and 1972. Although Ducati had stopped production of the 'narrow case' singles in 1967, the Scrambler used a narrow case engine made by MotoTrans in Spain. The model was not a sales success with less than 200 sold worldwide and was soon taken out of production.