Canada Geographic Information System

Last updated

The Canada Geographic Information System (CGIS) was an early geographic information system (GIS) developed for the Government of Canada beginning in the early 1960s. CGIS was used to store geospatial data for the Canada Land Inventory and assisted in the development of regulatory procedures for land-use management and resource monitoring in Canada.

Contents

At that time, Canada was beginning to realize problems associated with its large land mass and attempting to discern the availability of natural resources. The federal government decided to launch a national program to assist in management and inventory of its resources. The simple automated computer processes designed to store and process large amounts of data enabled Canada to begin a national land-use management program and become a foremost promoter of geographic information systems (GIS).

CGIS was designed to withstand great amounts of collected data by managing, modeling, and analyzing this data very quickly and accurately. As Canada presented such large geospatial datasets, it was necessary to be able to focus on certain regions or provinces in order to more effectively manage and maintain land-use. CGIS enabled its users to effectively collect national data and, if necessary, break it down into provincial datasets. Early applications of CGIS benefited land-use management and environmental impact monitoring programs across Canada.

Development

In 1960, Roger Tomlinson was working at Spartan Air Services, an aerial survey company based in Ottawa, Ontario. The company was focused on producing large-scale photogrammetric and geophysical maps, mostly for the Government of Canada. In the early 1960s, Tomlinson and the company were asked to produce a map for site-location analysis in an east African nation. Tomlinson immediately recognized that the new automated computer technologies might be applicable and even necessary to complete such a detail-oriented task more effectively and efficiently than humans. Eventually, Spartan met with IBM offices in Ottawa to begin developing a relationship to bridge the previous gap between geographic data and computer services. Tomlinson brought his geographic knowledge to the table as IBM brought computer programming and data management. [1]

The Government of Canada began working towards the development of a national program after a 1962 meeting between Tomlinson and Lee Pratt, head of the Canada Land Inventory (CLI). Pratt was charged with creation of maps covering the entire region of Canada's commercially productive areas by showing agriculture, forestry, wildlife, and recreation, all with the same classification schemes. Not only was the development of such maps a formidable task, but Pratt understood that computer automation may assist in the analytical processes as well. Tomlinson was the first to produce a technical feasibility study on whether computer mapping programs would be a viable solution for the land-use inventory and management programs, such as CLI. He is also given credit for coining the term "geographic information system" and is recognized as the "Modern Father of GIS."

CGIS continued to be developed and operated as a stand alone system by the Government of Canada until the late 1980s, at which point the widespread emergence of commercial GIS software slowly rendered it obsolete. In the early 1990s, a group of volunteers successfully extracted all of the data from the old computer tapes, and the data made available on GeoGratis.

See also

Related Research Articles

<span class="mw-page-title-main">Geographic information system</span> System to capture, manage and present geographic data

A geographic information system (GIS) consists of integrated computer hardware and software that store, manage, analyze, edit, output, and visualize geographic data. Much of this often happens within a spatial database, however, this is not essential to meet the definition of a GIS. In a broader sense, one may consider such a system also to include human users and support staff, procedures and workflows, the body of knowledge of relevant concepts and methods, and institutional organizations.

A GIS file format is a standard for encoding geographical information into a computer file, as a specialized type of file format for use in geographic information systems (GIS) and other geospatial applications. Since the 1970s, dozens of formats have been created based on various data models for various purposes. They have been created by government mapping agencies, GIS software vendors, standards bodies such as the Open Geospatial Consortium, informal user communities, and even individual developers.

<span class="mw-page-title-main">Geomatics</span> Geographic data discipline

Geomatics is defined in the ISO/TC 211 series of standards as the "discipline concerned with the collection, distribution, storage, analysis, processing, presentation of geographic data or geographic information". Under another definition, it consists of products, services and tools involved in the collection, integration and management of geographic (geospatial) data. It is also known as geomatic(s) engineering. Surveying engineering was the widely used name for geomatic(s) engineering in the past.

Geoinformatics is the science and technology that develop and use data, software, and computing facilities in the cyberinfrastructure ecosystem to address the needs of geosciences and related branches of science and engineering.

Address geocoding, or simply geocoding, is the process of taking a text-based description of a location, such as an address or the name of a place, and returning geographic coordinates, frequently latitude/longitude pair, to identify a location on the Earth's surface. Reverse geocoding, on the other hand, converts geographic coordinates to a description of a location, usually the name of a place or an addressable location. Geocoding relies on a computer representation of address points, the street / road network, together with postal and administrative boundaries.

A GIS software program is a computer program to support the use of a geographic information system, providing the ability to create, store, manage, query, analyze, and visualize geographic data, that is, data representing phenomena for which location is important. The GIS software industry encompasses a broad range of commercial and open-source products that provide some or all of these capabilities within various information technology architectures.

<span class="mw-page-title-main">Spatial analysis</span> Formal techniques which study entities using their topological, geometric, or geographic properties

Spatial analysis is any of the formal techniques which studies entities using their topological, geometric, or geographic properties. Spatial analysis includes a variety of techniques using different analytic approaches, especially spatial statistics. It may be applied in fields as diverse as astronomy, with its studies of the placement of galaxies in the cosmos, or to chip fabrication engineering, with its use of "place and route" algorithms to build complex wiring structures. In a more restricted sense, spatial analysis is geospatial analysis, the technique applied to structures at the human scale, most notably in the analysis of geographic data. It may also be applied to genomics, as in transcriptomics data.

<span class="mw-page-title-main">Roger Tomlinson</span>

Roger Frank Tomlinson was an English-Canadian geographer and the primary originator of modern geographic information systems (GIS), and has been acknowledged as the "father of GIS."

The Canada Land Inventory (CLI) is a multi-disciplinary land inventory of rural Canada.

Geospatial metadata is a type of metadata applicable to geographic data and information. Such objects may be stored in a geographic information system (GIS) or may simply be documents, data-sets, images or other objects, services, or related items that exist in some other native environment but whose features may be appropriate to describe in a (geographic) metadata catalog.

A Spatial Data Infrastructure (SDI), also called geospatial data infrastructure, is a data infrastructure implementing a framework of geographic data, metadata, users and tools that are interactively connected in order to use spatial data in an efficient and flexible way. Another definition is "the technology, policies, standards, human resources, and related activities necessary to acquire, process, distribute, use, maintain, and preserve spatial data".

A geoportal is a type of web portal used to find and access geographic information and associated geographic services via the Internet. Geoportals are important for effective use of geographic information systems (GIS) and a key element of a spatial data infrastructure (SDI).

A geographic data model, geospatial data model, or simply data model in the context of geographic information systems, is a mathematical and digital structure for representing phenomena over the Earth. Generally, such data models represent various aspects of these phenomena by means of geographic data, including spatial locations, attributes, change over time, and identity. For example, the vector data model represents geography as collections of points, lines, and polygons, and the raster data model represent geography as cell matrices that store numeric values. Data models are implemented throughout the GIS ecosystem, including the software tools for data management and spatial analysis, data stored in a variety of GIS file formats, specifications and standards, and specific designs for GIS installations.

Geographic Information Systems (GIS) are an increasingly important component of business, healthcare, security, government, trade, media, transportation and tourism industries and operations in China. GIS software is playing an increasing role in the way Chinese companies analyze and manage business operations.

The Spatial Archive and Interchange Format was defined in the early 1990s as a self-describing, extensible format designed to support interoperability and storage of geospatial data.

The National Hydrography Dataset (NHD) is a digital database of surface water features used to make maps. It contains features such as lakes, ponds, streams, rivers, canals, dams and stream gages for the United States.

Geographic information systems (GIS) play a constantly evolving role in geospatial intelligence (GEOINT) and United States national security. These technologies allow a user to efficiently manage, analyze, and produce geospatial data, to combine GEOINT with other forms of intelligence collection, and to perform highly developed analysis and visual production of geospatial data. Therefore, GIS produces up-to-date and more reliable GEOINT to reduce uncertainty for a decisionmaker. Since GIS programs are Web-enabled, a user can constantly work with a decision maker to solve their GEOINT and national security related problems from anywhere in the world. There are many types of GIS software used in GEOINT and national security, such as Google Earth, ERDAS IMAGINE, GeoNetwork opensource, and Esri ArcGIS.

GeoSUR is a regional initiative led by spatial data producers in Latin America and the Caribbean to implement a regional geospatial network and to help establish the basis of a spatial data infrastructure in the region. GeoSUR supports the development of free access geographic services useful to find, view and analyze spatial information through maps, satellite images, and geographic data.

<span class="mw-page-title-main">Internet GIS</span> Internet technologies regarding spatial data

Internet GIS, or Internet geographic information systems, is a term that refers to a broad set of technologies and applications that employ the Internet to access, analyze, visualize, and distribute spatial data.

<span class="mw-page-title-main">Web GIS</span> Technologies employing the World Wide Web to manage spatial data

Web GIS, or Web Geographic Information Systems, are GIS that employ the World Wide Web to facilitate the storage, visualization, analysis, and distribution of spatial information over the Internet.

References

  1. ↑ Coppock, J. T.; Rhind, D. W. (1991). Maguire, David J.; Goodchild, Michael F.; Rhind, David W. (eds.). Geographical Information Systems: Principles and Applications (PDF). Harlow, UK: Longmans. pp. 21–43.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.