Cantlop Bridge

Last updated

Cantlop Bridge
Cantlop Bridge 2016.jpg
Cantlop Bridge in 2016
Coordinates 52°39′06″N2°42′53″W / 52.6518°N 2.7148°W / 52.6518; -2.7148 Coordinates: 52°39′06″N2°42′53″W / 52.6518°N 2.7148°W / 52.6518; -2.7148
Carriesdisused since the 1970s
Crosses Cound Brook
Locale Cantlop, Shropshire
Heritage statusGrade II listed
Characteristics
Design Arch bridge
MaterialCast-iron
Total length9.5 metres (31 ft)
No. of spans1
History
Designer Thomas Telford
Construction end1818
Location
Cantlop Bridge

Cantlop Bridge is a single span cast-iron road bridge over the Cound Brook, located to the north of Cantlop in the parish of Berrington, Shropshire. It was constructed in 1818 to a design possibly by Thomas Telford, having at least been approved by him, [1] and replaced an unsuccessful cast iron coach bridge constructed in 1812. [2] The design of the bridge was innovative for the period, using a light-weight design of cast-iron lattice ribs to support the road deck in a single span, and appears to be a scaled-down version of a Thomas Telford bridge at Meole Brace, Shropshire. The bridge is the only surviving Telford-approved cast-iron bridge in Shropshire, [1] and is a Grade II* listed building and scheduled monument. It originally carried the turnpike road from Shrewsbury to Acton Burnell.

Contents

History and description

Thomas Telford worked as the county surveyor of Shropshire between 1787 and 1834, and the bridge is reported to have once held a cast iron plate above the centre of the arch inscribed with "Thomas Telford Esqr - Engineer - 1818", which is apparently visible in historic photographs, but has not been in place since at least 1985. [2] The bridge design incorporates dressed red and grey sandstone abutments with ashlar dressings, these are slightly curved and ramped, with chamfered ashlar quoins, string courses, and moulded cornices. [2] The structural cast-iron consists of a single segmental span with four arched lattice ribs, braced by five transverse cast-ironmembers. The road deck is formed from cast-iron metal deck plates, tarmacked over, and now finished with gravel. The original parapets have at some point been replaced with painted cast-iron railings with dograils, dogbars and shaped end balusters. [2]

Present-day

The bridge today remains as a monument only, being closed to vehicular traffic. It was bypassed by a more modern adjacent concrete bridge built in the 1970s. It is in the care of English Heritage and is freely accessible to pedestrians. A layby exists for visitors to park and there is an information board.

See also

Notes

  1. 1 2 "English heritage Website: Cantlop Bridge" . Retrieved 29 August 2011.
  2. 1 2 3 4 "English Heritage Pastscape website". Archived from the original on 9 October 2012. Retrieved 29 August 2011.

Related Research Articles

<span class="mw-page-title-main">Thomas Telford</span> Scottish civil engineer (1757–1834)

Thomas Telford was a Scottish civil engineer. After establishing himself as an engineer of road and canal projects in Shropshire, he designed numerous infrastructure projects in his native Scotland, as well as harbours and tunnels. Such was his reputation as a prolific designer of highways and related bridges, he was dubbed the Colossus of Roads, and, reflecting his command of all types of civil engineering in the early 19th century, he was elected as the first president of the Institution of Civil Engineers, a post he held for 14 years until his death.

<span class="mw-page-title-main">Pontcysyllte Aqueduct</span> Waterway in Wales

The Pontcysyllte Aqueduct is a navigable aqueduct that carries the Llangollen Canal across the River Dee in the Vale of Llangollen in northeast Wales.

<span class="mw-page-title-main">Galton Bridge</span> Cast-iron bridge in West Midlands, England

The Galton Bridge is a cast-iron bridge in Smethwick, near Birmingham, in central England. Opened in 1829 as a road bridge, the structure has been pedestrianised since the 1970s. It was built by Thomas Telford to carry a road across the new main line of the Birmingham Canal, which was built in a deep cutting. The bridge is 70 feet above the canal, making it reputedly the highest single-span arch bridge in the world when it was built, 26 feet wide, and 150 feet long. The iron components were fabricated at the nearby Horseley Ironworks and assembled atop the masonry abutments. The design includes decorative lamp-posts and X-shaped bracing in the spandrels.

<span class="mw-page-title-main">Chirk Aqueduct</span> Bridge in Chirk

Chirk Aqueduct is a 70-foot (21 m) high and 710-foot (220 m) long navigable aqueduct that carries what is now the Llangollen Canal across the Ceiriog Valley near Chirk, on the England-Wales border, spanning the two countries.

<span class="mw-page-title-main">English Bridge</span> Bridge across the River Severn in Shrewsbury, England

The English Bridge is a masonry arch viaduct, crossing the River Severn in Shrewsbury, Shropshire. The present bridge is a 1926 rebuilding and widening of John Gwynn's design, completed in 1774. A bridge is known to have stood at this spot since at least Norman times. Historically, it was known as the "Stone Bridge". It is a Grade II* listed building.

<span class="mw-page-title-main">The Iron Bridge</span> Bridge across the River Severn in Shropshire, England

The Iron Bridge is a cast iron arch bridge that crosses the River Severn in Shropshire, England. Opened in 1781, it was the first major bridge in the world to be made of cast iron. Its success inspired the widespread use of cast iron as a structural material, and today the bridge is celebrated as a symbol of the Industrial Revolution.

<span class="mw-page-title-main">Montford Bridge</span> Human settlement in England

Montford Bridge is a village in Shropshire, England, and also the name of the bridge in that village.

<span class="mw-page-title-main">Cantlop</span> Human settlement in England

Cantlop is a small village in the English county of Shropshire. It is part of the civil parish of Berrington.

<span class="mw-page-title-main">Albert Edward Bridge</span> Railway bridge in Shropshire, England.

The Albert Edward Bridge is a railway bridge spanning the River Severn at Coalbrookdale in Shropshire, England.

<span class="mw-page-title-main">Victoria Bridge, Worcestershire</span> Bridge crossing the River Severn in Worcestershire, England

The Victoria Bridge crosses the River Severn between Arley and Bewdley in Worcestershire, England. At the time of its construction, the 200-foot railway bridge was the longest single span cast iron bridge in Britain.

<span class="mw-page-title-main">Waterloo Bridge, Betws-y-Coed</span> Bridge in Betws-y-Coed

Waterloo Bridge is an early cast iron bridge, spanning the River Conwy at Betws-y-Coed, in Conwy county borough, north-west Wales.

<span class="mw-page-title-main">Holt Fleet Bridge</span> Bridge over the River Severn in Worcestershire, England

Holt Fleet Bridge, also known as Holt Bridge, is a cast-iron arch bridge over the River Severn, at Holt in Worcestershire, England. It has a span of 150 feet (46 m); it was designed by Thomas Telford and opened in 1828. It is Grade II listed, and is similar to Telford's Galton Bridge, which is a Grade I listed structure that spans his BCN New Main Line canal at Smethwick.

<span class="mw-page-title-main">Mythe Bridge</span> Bridge in Tewkesbury, Gloucestershire

Mythe Bridge carries the A438 road across the River Severn at Tewkesbury. It is a cast-iron arch bridge spanning 170 feet (52 m) and 24 feet (7.3 m) wide, designed by Thomas Telford and completed in April 1826. It is a Grade II* listed structure.

<span class="mw-page-title-main">Slateford Aqueduct</span> Bridge in Slateford

The Slateford Aqueduct is a navigable aqueduct that carries the Union Canal over the Water of Leith at Slateford, Edinburgh, Scotland. Completed in 1822, it has eight arches and spans a length of 500 feet (150 m).

William Hazledine was an English ironmaster. Establishing large foundries, he was a pioneer in casting structural ironwork, most notably for canal aqueducts and early suspension bridges. Many of these projects were collaborations with Thomas Telford, including the Pontcysyllte Aqueduct and the Menai Suspension Bridge.

<span class="mw-page-title-main">Cound Brook</span> River in Shropshire, England

Cound Brook is a tributary of the River Severn in Shropshire, England, running to south of the county town Shrewsbury. The Cound Brook rises in the Stretton Hills and discharges into the River Severn at Eyton on Severn after winding its way for 25 miles (40 km) across the southern Shropshire-Severn plains.

<span class="mw-page-title-main">Coalport Bridge</span> Bridge in Shropshire, England

Coalport Bridge is a cast iron arch bridge between Coalport and Preens Eddy in Shropshire, England.

<span class="mw-page-title-main">Llandinam Bridge</span>

Llandinam Bridge is a single-arch cast-iron Grade II*-listed bridge located in Llandinam, Powys, Wales. Constructed in 1846, it was the first cast-iron bridge in the county of Montgomeryshire, and was designed by Thomas Penson to replace an earlier timber bridge.

<span class="mw-page-title-main">Old Spey Bridge, Fochabers</span> Bridge

The Old Spey Bridge is a footbridge on the outskirts of Fochabers in Moray, Scotland, which formerly carried the main road between Inverness and Aberdeen over the River Spey. Originally built between 1801–1806 by George Burn, it was partially destroyed in the Muckle Spate of 1829, with two of its arches being washed away. Archibald Simpson repaired the bridge in 1831 with a single timber span, which was reconstructed in cast iron in 1853. The bridge is designated a Category A listed building.

<span class="mw-page-title-main">Belvidere Bridge</span> Historic bridge in Shrewsbury

Belvidere Bridge is a cast iron arch railway bridge in Shrewsbury, western England, built for the Shrewsbury and Birmingham Railway in 1849. It carries the modern Wolverhampton to Shrewsbury railway line over the River Severn and is a grade II* listed building.

References