Casting out nines

Last updated

Casting out nines is any of three arithmetical procedures: [1]

Contents

Digit sums

To "cast out nines" from a single number, its decimal digits can be simply added together to obtain its so-called digit sum. The digit sum of 2946, for example is 2 + 9 + 4 + 6 = 21. Since 21 = 2946 − 325 × 9, the effect of taking the digit sum of 2946 is to "cast out" 325 lots of 9 from it. If the digit 9 is ignored when summing the digits, the effect is to "cast out" one more 9 to give the result 12.

More generally, when casting out nines by summing digits, any set of digits which add up to 9, or a multiple of 9, can be ignored. In the number 3264, for example, the digits 3 and 6 sum to 9. Ignoring these two digits, therefore, and summing the other two, we get 2 + 4 = 6. Since 6 = 3264 − 362 × 9, this computation has resulted in casting out 362 lots of 9 from 3264.

For an arbitrary number, , normally represented by the sequence of decimal digits, , the digit sum is . The difference between the original number and its digit sum is

Because numbers of the form are always divisible by 9 (since ), replacing the original number by its digit sum has the effect of casting out

lots of 9.

Digital roots

If the procedure described in the preceding paragraph is repeatedly applied to the result of each previous application, the eventual result will be a single-digit number from which all 9s, with the possible exception of one, have been "cast out". The resulting single-digit number is called the digital root of the original. The exception occurs when the original number has a digital root of 9, whose digit sum is itself, and therefore will not be cast out by taking further digit sums.

The number 12565, for instance, has digit sum 1+2+5+6+5 = 19, which, in turn, has digit sum 1+9=10, which, in its turn has digit sum 1+0=1, a single-digit number. The digital root of 12565 is therefore 1, and its computation has the effect of casting out (12565 - 1)/9 = 1396 lots of 9 from 12565.

Checking calculations by casting out nines

To check the result of an arithmetical calculation by casting out nines, each number in the calculation is replaced by its digital root and the same calculations applied to these digital roots. The digital root of the result of this calculation is then compared with that of the result of the original calculation. If no mistake has been made in the calculations, these two digital roots must be the same. Examples in which casting-out-nines has been used to check addition, subtraction, multiplication, and division are given below.

Examples

Addition

In each addend, cross out all 9s and pairs of digits that total 9, then add together what remains. These new values are called excesses. Add up leftover digits for each addend until one digit is reached. Now process the sum and also the excesses to get a final excess.

2 and 4 add up to 6.
8+1=9 and 4+5=9; there are no digits left.
2, 4, and 6 make 12; 1 and 2 make 3.
2 and 0 are 2.
6, 0, 3 and 2 make 11; 1 and 1 add up to 2.
The excess from the sum should equal the final excess from the addends.

Subtraction

First, cross out all 9s and digits that total 9 in both minuend and subtrahend (italicized).
Add up leftover digits for each value until one digit is reached.
Now follow the same procedure with the difference, coming to a single digit.
Because subtracting 2 from zero gives a negative number, borrow a 9 from the minuend.
The difference between the minuend and the subtrahend excesses should equal the difference excess.

Multiplication

First, cross out all 9s and digits that total 9 in each factor (italicized).
Add up leftover digits for each multiplicand until one digit is reached.
Multiply the two excesses, and then add until one digit is reached.
Do the same with the product, crossing out 9s and getting one digit.
*The excess from the product should equal the final excess from the factors.

*8 times 8 is 64; 6 and 4 are 10; 1 and 0 are 1.

Division

Cross out all 9s and digits that total 9 in the divisor, quotient, and remainder.
Add up all uncrossed digits from each value until one digit is reached for each value.
The dividend excess should equal the final excess from the other values.

In other words, perform the same procedure as in a multiplication, only backwards. 8x4=32 which is 5, 5+3 = 8. And 8=8.

How it works

The method works because the original numbers are 'decimal' (base 10), the modulus is chosen to differ by 1, and casting out is equivalent to taking a digit sum. In general any two 'large' integers, x and y, expressed in any smaller modulus as x' and y' (for example, modulo 7) will always have the same sum, difference or product as their originals. This property is also preserved for the 'digit sum' where the base and the modulus differ by 1.

If a calculation was correct before casting out, casting out on both sides will preserve correctness. However, it is possible that two previously unequal integers will be identical modulo 9 (on average, a ninth of the time).

The operation does not work on fractions, since a given fractional number does not have a unique representation.

A variation on the explanation

A trick to learn to add with nines is to add ten to the digit and to count back one. Since we are adding 1 to the tens digit and subtracting one from the units digit, the sum of the digits should remain the same. For example, 9 + 2 = 11 with 1 + 1 = 2. When adding 9 to itself, we would thus expect the sum of the digits to be 9 as follows: 9 + 9 = 18, (1 + 8 = 9) and 9 + 9 + 9 = 27, (2 + 7 = 9). Let us look at a simple multiplication: 5 × 7 = 35, (3 + 5 = 8). Now consider (7 + 9) × 5 = 16 × 5 = 80, (8 + 0 = 8) or 7 × (9 + 5) = 7 × 14 = 98, (9 + 8 = 17), (1 + 7 = 8).

Any non-negative integer can be written as 9×n + a, where 'a' is a single digit from 0 to 8, and 'n' is some non-negative integer. Thus, using the distributive rule, (9×n + a)×(9×m + b)= 9×9×n×m + 9(am + bn) + ab. Since the first two factors are multiplied by 9, their sums will end up being 9 or 0, leaving us with 'ab'. In our example, 'a' was 7 and 'b' was 5. We would expect that in any base system, the number before that base would behave just like the nine.

Limitation to casting out nines

While extremely useful, casting out nines does not catch all errors made while doing calculations. For example, the casting-out-nines method would not recognize the error in a calculation of 5 × 7 which produced any of the erroneous results 8, 17, 26, etc. (that is, any result congruent to 8 modulo 9). In particular, casting out nines does not catch transposition errors, such as 1324 instead of 1234. In other words, the method only catches erroneous results whose digital root is one of the 8 digits that is different from that of the correct result.

History

A form of casting out nines known to ancient Greek mathematicians was described by the Roman bishop Hippolytus (170–235) in The Refutation of all Heresies , and more briefly by the Syrian Neoplatonist philosopher Iamblichus (c.245–c.325) in his commentary on the Introduction to Arithmetic of Nicomachus of Gerasa. [2] Both Hippolytus's and Iamblichus's descriptions, though, were limited to an explanation of how repeated digital sums of Greek numerals were used to compute a unique "root" [3] between 1 and 9. Neither of them displayed any awareness of how the procedure could be used to check the results of arithmetical computations.

The earliest known surviving work which describes how casting out nines can be used to check the results of arithmetical computations is the Mahâsiddhânta, written around 950 by the Indian mathematician and astronomer Aryabhata II (c.920–c.1000). [4] Writing about 1020, the Persian polymath, Ibn Sina (Avicenna) (c.980–1037), also gave full details of what he called the "Hindu method" of checking arithmetical calculations by casting out nines. [5]

The procedure was described by Fibonacci in his Liber Abaci. [6]

Generalization

This method can be generalized to determine the remainders of division by certain prime numbers.

Since 3·3 = 9,

So we can use the remainder from casting out nines to get the remainder of division by three.

Casting out ninety nines is done by adding groups of two digits instead just one digit.

Since 11·9 = 99,

So we can use the remainder from casting out ninety nines to get the remainder of division by eleven. This is called casting out elevens. The same result can also be calculated directly by alternately adding and subtracting the digits that make up . Eleven divides if and only if eleven divides that sum. [7]

Casting out nine hundred ninety nines is done by adding groups of three digits.

Since 37·27 = 999,

So we can use the remainder from casting out nine hundred ninety nines to get the remainder of division by thirty seven.

Notes

  1. Krantz (2010 , pp.  67–70 )
  2. Heath (1921 , pp.  113–117 ), Hippolytus of Rome (1919 , pp.  30–32 ).
  3. The Greek term used by Hippolytus was "πυθμήν" ("pythmen").
  4. Datta & Singh (1962 , pp.  180–184 )
  5. Datta & Singh (1962 , p.  184 )
  6. Wells, D. The Penguin Dictionary of Curious and Interesting Numbers. Middlesex, England: Penguin Books, p. 74, 1986.
  7. Long (1972 , p. 83)

Related Research Articles

<span class="mw-page-title-main">Decimal</span> Number in base-10 numeral system

The decimal numeral system is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral system. The way of denoting numbers in the decimal system is often referred to as decimal notation.

In mathematics and computer science, Horner's method is an algorithm for polynomial evaluation. Although named after William George Horner, this method is much older, as it has been attributed to Joseph-Louis Lagrange by Horner himself, and can be traced back many hundreds of years to Chinese and Persian mathematicians. After the introduction of computers, this algorithm became fundamental for computing efficiently with polynomials.

The quater-imaginary numeral system is a numeral system, first proposed by Donald Knuth in 1960. Unlike standard numeral systems, which use an integer as their bases, it uses the imaginary number 2i as its base. It is able to uniquely represent every complex number using only the digits 0, 1, 2, and 3. Numbers less than zero, which are ordinarily represented with a minus sign, are representable as digit strings in quater-imaginary; for example, the number −1 is represented as "103" in quater-imaginary notation.

A numerical digit or numeral is a single symbol used alone or in combinations, to represent numbers in a positional numeral system. The name "digit" comes from the fact that the ten digits of the hands correspond to the ten symbols of the common base 10 numeral system, i.e. the decimal digits.

<span class="mw-page-title-main">Method of complements</span> Method of subtraction

In mathematics and computing, the method of complements is a technique to encode a symmetric range of positive and negative integers in a way that they can use the same algorithm for addition throughout the whole range. For a given number of places half of the possible representations of numbers encode the positive numbers, the other half represents their respective additive inverses. The pairs of mutually additive inverse numbers are called complements. Thus subtraction of any number is implemented by adding its complement. Changing the sign of any number is encoded by generating its complement, which can be done by a very simple and efficient algorithm. This method was commonly used in mechanical calculators and is still used in modern computers. The generalized concept of the radix complement is also valuable in number theory, such as in Midy's theorem.

Balanced ternary is a ternary numeral system that uses a balanced signed-digit representation of the integers in which the digits have the values −1, 0, and 1. This stands in contrast to the standard (unbalanced) ternary system, in which digits have values 0, 1 and 2. The balanced ternary system can represent all integers without using a separate minus sign; the value of the leading non-zero digit of a number has the sign of the number itself. The balanced ternary system is an example of a non-standard positional numeral system. It was used in some early computers and has also been used to solve balance puzzles.

<span class="mw-page-title-main">Cube (algebra)</span> Number raised to the third power

In arithmetic and algebra, the cube of a number n is its third power, that is, the result of multiplying three instances of n together. The cube of a number or any other mathematical expression is denoted by a superscript 3, for example 23 = 8 or (x + 1)3.

In recreational mathematics, a Keith number or repfigit number is a natural number in a given number base with digits such that when a sequence is created such that the first terms are the digits of and each subsequent term is the sum of the previous terms, is part of the sequence. Keith numbers were introduced by Mike Keith in 1987. They are computationally very challenging to find, with only about 100 known.

<span class="mw-page-title-main">Mental calculation</span> Arithmetical calculations using only the human brain

Mental calculation consists of arithmetical calculations using only the human brain, with no help from any supplies or devices such as a calculator. People may use mental calculation when computing tools are not available, when it is faster than other means of calculation, or even in a competitive context. Mental calculation often involves the use of specific techniques devised for specific types of problems. People with unusually high ability to perform mental calculations are called mental calculators or lightning calculators.

The Trachtenberg system is a system of rapid mental calculation. The system consists of a number of readily memorized operations that allow one to perform arithmetic computations very quickly. It was developed by the Russian engineer Jakow Trachtenberg in order to keep his mind occupied while being in a Nazi concentration camp.

A divisibility rule is a shorthand and useful way of determining whether a given integer is divisible by a fixed divisor without performing the division, usually by examining its digits. Although there are divisibility tests for numbers in any radix, or base, and they are all different, this article presents rules and examples only for decimal, or base 10, numbers. Martin Gardner explained and popularized these rules in his September 1962 "Mathematical Games" column in Scientific American.

In mathematical notation for numbers, a signed-digit representation is a positional numeral system with a set of signed digits used to encode the integers.

In mathematics, the digit sum of a natural number in a given number base is the sum of all its digits. For example, the digit sum of the decimal number would be

Methods of computing square roots are algorithms for approximating the non-negative square root of a positive real number . Since all square roots of natural numbers, other than of perfect squares, are irrational, square roots can usually only be computed to some finite precision: these methods typically construct a series of increasingly accurate approximations.

The digital root of a natural number in a given radix is the value obtained by an iterative process of summing digits, on each iteration using the result from the previous iteration to compute a digit sum. The process continues until a single-digit number is reached. For example, in base 10, the digital root of the number 12345 is 6 because the sum of the digits in the number is 1 + 2 + 3 + 4 + 5 = 15, then the addition process is repeated again for the resulting number 15, so that the sum of 1 + 5 equals 6, which is the digital root of that number. In base 10, this is equivalent to taking the remainder upon division by 9, which allows it to be used as a divisibility rule.

In number theory, the multiplicative digital root of a natural number in a given number base is found by multiplying the digits of together, then repeating this operation until only a single-digit remains, which is called the multiplicative digital root of . The multiplicative digital root for the first few positive integers are:

In number theory, a factorion in a given number base is a natural number that equals the sum of the factorials of its digits. The name factorion was coined by the author Clifford A. Pickover.

A repeating decimal or recurring decimal is a decimal representation of a number whose digits are eventually periodic ; if this sequence consists only of zeros, the decimal is said to be terminating, and is not considered as repeating. It can be shown that a number is rational if and only if its decimal representation is repeating or terminating. For example, the decimal representation of 1/3 becomes periodic just after the decimal point, repeating the single digit "3" forever, i.e. 0.333.... A more complicated example is 3227/555, whose decimal becomes periodic at the second digit following the decimal point and then repeats the sequence "144" forever, i.e. 5.8144144144.... Another example of this is 593/53, which becomes periodic after the decimal point, repeating the 13-digit pattern "1886792452830" forever, i.e. 11.18867924528301886792452830....

<span class="mw-page-title-main">Real number</span> Number representing a continuous quantity

In mathematics, a real number is a number that can be used to measure a continuous one-dimensional quantity such as a distance, duration or temperature. Here, continuous means that pairs of values can have arbitrarily small differences. Every real number can be almost uniquely represented by an infinite decimal expansion.

In number theory, a perfect digital invariant (PDI) is a number in a given number base () that is the sum of its own digits each raised to a given power ().

References