The chain pump is type of a water pump in which several circular discs are positioned on an endless chain. One part of the chain dips into the water, and the chain runs through a tube, slightly bigger than the diameter of the discs. As the chain is drawn up the tube, water becomes trapped between the discs and is lifted to and discharged at the top. Chain pumps were used for centuries in the ancient Middle East, Europe, and China.
The earliest evidence for this device is in a Babylonian text from about 700 B.C. They were commonly powered by humans or animals. [1] The device then appeared in ancient Egypt from about 200 B.C., featuring a pair of gear-wheels[ dubious – discuss ]. [2]
A version of the chain pump was used in ancient Greece and Rome, sometimes with pots, or scoops fixed to the chain, which, as they passed over the top pulley, tipped the water out; a 2nd-century example is preserved in London. [3] Philo of Byzantium wrote of such a device in the 2nd century B.C.; [4] the historian Vitruvius mentioned them around 30 B.C. Fragments of the cogs, crank, and discs, of a bilge pump, from a 1st-century Roman barge, were unearthed at Lake Nemi. [5] [6]
Chain pumps were used in European mines during the Renaissance; mineralogist Georg Agricola illustrated them in his De re metallica (1556). [7] Chain pumps were commonly used on naval vessels of the time to pump the bilges, and examples are known in the nineteenth century for low-lift irrigation.
Chain pumps were also used in ancient China from at least the 1st century A.D. In China, they were also called dragon backbones. [8] One of the earliest accounts was a description by the Han dynasty philosopher Wang Chong (A.D. 27–97) around A.D. 80. [9] Unlike those found in the West, chain pumps in China resembled the square-pallet type instead of the pear-shaped bucket[ dubious – discuss ]. Illustrations of such Chinese chain pumps show them drawing water up a slanted channel. These were sometimes powered by hydraulics of a rushing current against a horizontal water wheel acting against a vertical wheel, [10] and others by a horizontal mechanical wheel acting upon a vertical wheel that was pulled by the labor of oxen [ dubious – discuss ]. [11] There were also square-pallet chain pumps operated by pedals. [12]
From the 1st century onwards, chain pumps were widespread throughout the Chinese countryside. [13] Chinese square-pallet chain pumps were used mostly for irrigation, though they found use in public works as well. The infamous Eastern Han court eunuch Zhang Rang (d. A.D. 189) once ordered the engineer Bi Lan (畢嵐) to construct a series of square-pallet chain pumps outside the capital city Luoyang. [14] These chain pumps serviced the palaces and living quarters of the Luoyang; the water lifted by the chain pumps was brought in by a pipe system. [14] Ma Jun, the renowned mechanical engineer of the Three Kingdoms era, also constructed a series of chain pumps for watering the palatial gardens of Emperor Ming of Wei (226–239). [15]
During the period of agricultural expansion in Song China (10th–13th centuries CE), the technology of water-rising devices was improved. For some centuries they had been used for moving water for drainage or irrigation purposes. The simplest design, known as the counterbalanced bucket or 'swape' or 'well-sweep' was in common use at that time. A more complicated design, the 'square-pallet chain pump', was introduced several centuries before the growth in Song technology, but had not seen prior use for farming. They became more common around the end of the first millennium AD. [16]
From the 13th century onwards, the Chinese also used windmills (acquired from the Middle East) to power square-pallet chain pumps. [17] Yet there were other types of chain pumps besides the square-pallet design. In Song Yingxing's (1587–1666) encyclopedic book the Tiangong Kaiwu (1637), there is description and illustration of a cylinder chain pump, powered by waterwheels and leading water up from the river to an elevated plain of agricultural crops. [18]
The contribution of chain pumps to agricultural growth during the Song was extolled by poets such as Li Chuquan (李处权) of the twelfth century. The Song government actively spread the technology, introducing pumping equipment and chain pumps to those areas as yet unfamiliar with the technique. [19]
Zhang Heng, formerly romanized Chang Heng, was a Chinese polymathic scientist and statesman who lived during the Han dynasty. Educated in the capital cities of Luoyang and Chang'an, he achieved success as an astronomer, mathematician, seismologist, hydraulic engineer, inventor, geographer, cartographer, ethnographer, artist, poet, philosopher, politician, and literary scholar.
The timeline of historic inventions is a chronological list of particularly important or significant technological inventions and their inventors, where known.
A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of many material goods, including flour, lumber, paper, textiles, and many metal products. These watermills may comprise gristmills, sawmills, paper mills, textile mills, hammermills, trip hammering mills, rolling mills, and wire drawing mills.
A water wheel is a machine for converting the energy of flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a wheel, with a number of blades or buckets arranged on the outside rim forming the driving car. Water wheels were still in commercial use well into the 20th century, but they are no longer in common use today. Uses included milling flour in gristmills, grinding wood into pulp for papermaking, hammering wrought iron, machining, ore crushing and pounding fibre for use in the manufacture of cloth.
A wheelbarrow is a small hand-propelled load-bearing vehicle, usually with just one wheel, designed to be pushed and guided by a single person using two handles at the rear. The term "wheelbarrow" is made of two words: "wheel" and "barrow." "Barrow" is a derivation of the Old English "barew" which was a device used for carrying loads.
A crank is an arm attached at a right angle to a rotating shaft by which circular motion is imparted to or received from the shaft. When combined with a connecting rod, it can be used to convert circular motion into reciprocating motion, or vice versa. The arm may be a bent portion of the shaft, or a separate arm or disk attached to it. Attached to the end of the crank by a pivot is a rod, usually called a connecting rod (conrod).
A water clock or clepsydra is a timepiece by which time is measured by the regulated flow of liquid into or out from a vessel, and where the amount of liquid can then be measured.
A trip hammer, also known as a tilt hammer or helve hammer, is a massive powered hammer. Traditional uses of trip hammers include pounding, decorticating and polishing of grain in agriculture. In mining, trip hammers were used for crushing metal ores into small pieces, although a stamp mill was more usual for this. In finery forges they were used for drawing out blooms made from wrought iron into more workable bar iron. They were also used for fabricating various articles of wrought iron, latten, steel and other metals.
Chain drive is a way of transmitting mechanical power from one place to another. It is often used to convey power to the wheels of a vehicle, particularly bicycles and motorcycles. It is also used in a wide variety of machines besides vehicles.
Su Song, courtesy name Zirong, was a Chinese polymathic scientist and statesman. Excelling in a variety of fields, he was accomplished in mathematics, astronomy, cartography, geography, horology, pharmacology, mineralogy, metallurgy, zoology, botany, mechanical engineering, hydraulic engineering, civil engineering, invention, art, poetry, philosophy, antiquities, and statesmanship during the Song dynasty (960–1279).
Zhang Sixun was a Chinese astronomer and mechanical engineer from Bazhong, Sichuan during the early Song dynasty. He is credited with creating an armillary sphere for his astronomical clock tower that employed the use of liquid mercury. The liquid mercury filled scoops of the waterwheel would rotate and thus provide the effect of an escapement mechanism in clockworks and allow the astronomical armillary sphere to rotate as needed.
Ma Jun, courtesy name Deheng, was a Chinese mechanical engineer, inventor, and politician who lived in the state of Cao Wei during the Three Kingdoms period of China. His most notable invention was that of the south-pointing chariot, a directional compass vehicle which actually had no magnetic function, but was operated by use of differential gears. It is because of this revolutionary device that Ma Jun is known as one of the most brilliant mechanical engineers and inventors of his day. The device was re-invented by many after Ma Jun, including the astronomer and mathematician Zu Chongzhi (429–500). In the later medieval dynastic periods, Ma Jun's south-pointing chariot was combined in a single device with the distance-measuring odometer.
Song Yingxing was a Chinese scientist and encyclopedist who lived during the late Ming Dynasty (1368–1644). He was the author of Tiangong Kaiwu, an encyclopedia that covered a wide variety of technical subjects, including the use of gunpowder weapons. The British biochemist, sinologist, and historian Joseph Needham called Song Yingxing "The Diderot of China."
Ancient Chinese scientists and engineers made significant scientific innovations, findings and technological advances across various scientific disciplines including the natural sciences, engineering, medicine, military technology, mathematics, geology and astronomy.
The Song dynasty witnessed many substantial scientific and technological advances in Chinese history. Some of these advances and innovations were the products of talented statesmen and scholar-officials drafted by the government through imperial examinations. Shen Kuo (1031–1095), author of the Dream Pool Essays, is a prime example, an inventor and pioneering figure who introduced many new advances in Chinese astronomy and mathematics, establishing the concept of true north in the first known experiments with the magnetic compass. However, commoner craftsmen such as Bi Sheng (972–1051), the inventor of movable type printing, were also heavily involved in technical innovations.
The Wujing Zongyao, sometimes rendered in English as the Complete Essentials for the Military Classics, is a Chinese military compendium written from around 1040 to 1044.
Zhu Yu was a Chinese maritime historian during the Song dynasty. He retired in Huang Gang (黄岗) of the Hubei province, bought a country house and named it "Pingzhou". He called himself "Expert Vegetable Grower of Pingzhou (萍洲老圃)". Between 1111 and 1117 AD, Zhu Yu wrote the book Pingzhou Ketan, published in 1119 AD. It covered a wide variety of maritime subjects and issues in China at the time. His extensive knowledge of maritime engagements, technologies, and practices were because his father, Zhu Fu, was the Port Superintendent of Merchant Shipping for Guangzhou from 1094 until 1099 AD, whereupon he was elevated to the status of governor there and served in that office until 1102 AD.
A sāqiyah or saqiya, also spelled sakia or saqia) is a mechanical water lifting device. It is also called a Persian wheel, tablia, rehat, and in Latin tympanum. It is similar in function to a scoop wheel, which uses buckets, jars, or scoops fastened either directly to a vertical wheel, or to an endless belt activated by such a wheel. The vertical wheel is itself attached by a drive shaft to a horizontal wheel, which is traditionally set in motion by animal power Because it is not using the power of flowing water, the sāqiyah is different from a noria and any other type of water wheel.
The Tiangong Kaiwu (天工開物), or The Exploitation of the Works of Nature was a Chinese encyclopedia compiled by Song Yingxing. It was published in May 1637 with funding provided by Song's patron Tu Shaokui. The Tiangong Kaiwu is an encyclopedia covering a wide range of technical issues, including the use of various gunpowder weapons. Copies of the book were very scarce in China during the Qing dynasty (1644–1911), but original copies of the book were preserved in Japan.