Cheddleton Flint Mill

Last updated

Cheddleton Flint Mill Flint Mill by the Caldon Canal, Cheddleton, Staffordshire - geograph.org.uk - 589625.jpg
Cheddleton Flint Mill

Cheddleton Flint Mill is a water mill situated in the village of Cheddleton in the English county of Staffordshire. The mill race takes water from the river Churnet. The site is believed to have been used for milling since the Middle Ages. However, the present structures mainly date from the period of the Industrial Revolution, although there is evidence of some earlier work surviving.

Contents

There are actually two mills: one is a late 18th century structure which was purpose-built to grind flint for use in the pottery industry, [1] and the other was converted to the same purpose from use as a corn-mill. [2] The mill complex includes a miller's cottage, two flint kilns, a drying kiln and outbuildings, and is adjacent to the Caldon Canal.

Conservation

The complex was listed grade II* in 1986 (the buildings being separately listed). [2] It is now maintained and operated by the Cheddleton Flint Mill Industrial Heritage Trust, [3] a registered charity under English law. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Derwent Valley Mills</span> World Heritage site in Derbyshire, England

Derwent Valley Mills is a World Heritage Site along the River Derwent in Derbyshire, England, designated in December 2001. It is administered by the Derwent Valley Mills Partnership. The modern factory, or 'mill', system was born here in the 18th century to accommodate the new technology for spinning cotton developed by Richard Arkwright. With advancements in technology, it became possible to produce cotton continuously. The system was adopted throughout the valley, and later spread so that by 1788 there were over 200 Arkwright-type mills in Britain. Arkwright's inventions and system of organising labour was exported to Europe and the United States.

<span class="mw-page-title-main">Amberley Museum & Heritage Centre</span> Open-air industrial heritage museum at Amberley, West Sussex

Amberley Museum is an open-air industrial heritage museum at Amberley, near Arundel in West Sussex, England. The museum is owned and operated by Amberley Museum and Heritage Centre, a not-for-profit company and registered charity, and has the support of an active Friends organisation. The items in the Museums collection are held by The Amberley Museum Trust

<span class="mw-page-title-main">River Churnet</span> River in Staffordshire, England

The River Churnet is a river in Staffordshire, England. It is a tributary of the River Dove.

<span class="mw-page-title-main">New Lanark</span> Village in Lanarkshire, Scotland

New Lanark is a village on the River Clyde, approximately 1.4 miles from Lanark, in Lanarkshire, and some 25 miles (40 km) southeast of Glasgow, Scotland. It was founded in 1785 and opened in 1786 by David Dale, who built cotton mills and housing for the mill workers. Dale built the mills there in a brief partnership with the English inventor and entrepreneur Richard Arkwright to take advantage of the water power provided by the only waterfalls on the River Clyde. Under the ownership of a partnership that included Dale's son-in-law, Robert Owen, a Welsh utopian socialist and philanthropist, New Lanark became a successful business and an early example of a planned settlement and so an important milestone in the historical development of urban planning.

<span class="mw-page-title-main">Churnet Valley Railway</span> Heritage railway in Staffordshire, England

The Churnet Valley Railway is a preserved standard gauge heritage railway in the Staffordshire Moorlands of Staffordshire, England. It operates on part of the former Churnet Valley Line.which was opened by the North Staffordshire Railway. The railway is roughly 10+12 miles (16.9 km) long from Kingsley and Froghall to Ipstones. The land from Leek Brook Junction to Ipstones was opened by Moorland & City Railways (MCR) in 2010 after they took a lease out from Network Rail. This has subsequently been purchased by the Churmet Valley Railway. The main stations along the line are Kingsley and Froghall, Consall, Cheddleton and Leek Brook. Work has begun to extend the line to the town of Leek which will act as the northern terminus of the line. The line between Leek and Waterhouses has also been reopened as part of the heritage railway far as Ipstones.

Oxford Archaeology is one of the largest and longest-established independent archaeology and heritage practices in Europe, operating from three permanent offices in Oxford, Lancaster and Cambridge, and working across the UK. OA is a Registered Organisation with the Chartered Institute for Archaeologists (CIfA), and carries out commercial archaeological fieldwork in advance of development, as well as a range of other heritage related services. Oxford Archaeology primarily operates in the UK, but has also carried out contracts around the world, including Sudan, Qatar, Central Asia, China and the Caribbean. Numbers of employees vary owing to the project-based nature of the work, but in 2014 OA employed over 220 people.

<span class="mw-page-title-main">Bersham Ironworks</span> Former ironworks near Wrexham, Wales

Bersham Ironworks were large ironworks at Bersham, near Wrexham, Wales. They are most famous for being the original working site of John Wilkinson. They were also the first site in the world to use a new way of boring holes in cannon and steam engine cylinders.

<span class="mw-page-title-main">Gladstone Pottery Museum</span> Industrial museum in Staffordshire, England

The Gladstone Pottery Museum is a working museum of a medium-sized coal-fired pottery, typical of those once common in the North Staffordshire area of England from the time of the industrial revolution in the 18th century to the mid 20th century. It is a grade II* listed building.

<span class="mw-page-title-main">Cheddleton</span> Village in Staffordshire, England

Cheddleton is an ancient parish and village in the Staffordshire Moorlands, near to the town of Leek, England.

<span class="mw-page-title-main">Ditherington Flax Mill</span> Grade I listed factory building in Shropshire, England

Ditherington Flax Mill, a flax mill located in Ditherington, a suburb of Shrewsbury, England, is the first iron-framed building in the world, and described as "the grandfather of skyscrapers", despite its five-storey height. Its importance was officially recognised in the 1950s, resulting in it becoming a Grade I listed building. It is also locally known as the "Maltings" from its later use. The mill is in the hands of Historic England and is currently in use as a mixed-use workspace and exhibition following its official opening in 2022.

<span class="mw-page-title-main">Malt house</span>

A malt house, malt barn, or maltings, is a building where cereal grain is converted into malt by soaking it in water, allowing it to sprout and then drying it to stop further growth. The malt is used in brewing beer, whisky and in certain foods. The traditional malt house was largely phased out during the twentieth century in favour of more mechanised production. Many malt houses have been converted to other uses, such as Snape Maltings, England, which is now a concert hall.

<span class="mw-page-title-main">Torksey Castle</span>

Torksey Castle is an Elizabethan manor house located in the village of Torksey on the east bank of the River Trent in Lincolnshire, England. It is 12 miles northwest of Lincoln on the A156 road. Seven miles to the north is Gainsborough Old Hall and 10 miles southeast is Lincoln Castle. It is a 16th-century Tudor stone-built fortified manor house founded by the Jermyn family of Suffolk. It is a Grade-I listed building and a scheduled ancient monument but the building is on the Heritage at Risk Register. The site is private, with no public access and is only visible from the A156 road and a public footpath, on the west bank of the River Trent.

<span class="mw-page-title-main">Thwaite Mills</span>

Thwaite Mills is an industrial museum in Leeds, West Yorkshire, England. It is a fully restored working water-powered mill built in 1823-25, harnessing the power of the River Aire, and claims to be "one of the best last remaining examples of a water-powered mill in Britain". It is administered by Leeds City Council through Leeds Museums & Galleries. The mill, the manager's house and three associated buildings are all grade II listed buildings.

<span class="mw-page-title-main">Little Matlock Rolling Mill</span> Rolling mill

Little Matlock Rolling Mill also known as Low Matlock Rolling Mill is a Grade II* Listed building situated on the River Loxley in the village of Loxley on the outskirts of the City of Sheffield, South Yorkshire, England. The building continues to operate as a rolling mill, owned and operated by Pro-Roll Ltd, a specialist hand rolling company. A brick building extension was added to the original 1882 structure in 1939.

<span class="mw-page-title-main">Etruria Industrial Museum</span> Museum in Etruria, Staffordshire, England

The Etruria Industrial Museum is located in Etruria, Staffordshire, in England. The museum is a typical and well-preserved example of a nineteenth century British steam-powered potter's mill. It is situated between the Trent and Mersey Canal and the Etruria staircase locks of the Caldon Canal. The museum has a modern entrance building, leading into a Grade II* listed building which was formerly the Etruscan bone and flint mill. The mill is also a scheduled monument.

<span class="mw-page-title-main">British Engineerium</span> Museum in Hove, East Sussex, UK

The British Engineerium is an engineering and steam power museum in Hove, East Sussex. It is housed in the Goldstone Pumping Station, a set of High Victorian Gothic buildings started in 1866. The Goldstone Pumping Station supplied water to the local area for more than a century before it was converted to its present use. The site has been closed to the public since 2006, and in March 2018 the entire complex was put up for sale.

<span class="mw-page-title-main">Weavers' Triangle</span> Historic textie-producing area with a cotton museum in Lancashire, England

The Weavers' Triangle is an area of Burnley in Lancashire, England consisting mostly of 19th-century industrial buildings at the western side of town centre clustered around the Leeds and Liverpool Canal. The area has significant historic interest as the cotton mills and associated buildings encapsulate the social and economic development of the town and its weaving industry. From the 1980s, the area has been the focus of major redevelopment efforts.

<span class="mw-page-title-main">Leigh Spinners</span>

Leigh Spinners or Leigh Mill is a Grade II* listed double cotton spinning mill in Bedford, Leigh, Greater Manchester, England.

<span class="mw-page-title-main">Lytham Windmill</span>

Lytham Windmill is situated on Lytham Green in the coastal town of Lytham St Annes, Lancashire, England. It is of the type known as a tower mill and was designed for grinding wheat and oats to make flour or bran. Since commercial milling on the site ceased in 1921 the mill has belonged to the town and is operated by Fylde Borough Council, who open it to the public during the summer. The mill also contains a museum run by the Lytham Heritage Trust which explains the history and practice of flour milling.

<span class="mw-page-title-main">Raffan's Mill and Brick Bottle Kilns</span> Historic site in New South Wales, Australia

Raffan's Mill and Brick Bottle Kilns is a heritage-listed lime kiln at Carlton Road, Portland, City of Lithgow, New South Wales, Australia. It was built from 1884 to 1895 by George Raffan and Alexander Currie. It is also known as Raffan's Mill and Brick Bottle Kilns Precinct, Portland Cement Works Site, Williwa Street Portland. The property is owned by Boral Limited. It was added to the New South Wales State Heritage Register on 3 August 2012.

References

  1. "North Mill to Cheddleton Flint Mill". British Listed Buildings. Retrieved 3 December 2014.
  2. 1 2 "South Mill to Cheddleton Flint Mill". British Listed Buildings. Retrieved 3 December 2014.
  3. "Cheddleton Flint Mill Industrial Heritage Trust". Cheddleton Flint Mill Industrial Heritage Trust. Retrieved 2 August 2006.
  4. "Cheddleton Flint Mill Industrial Heritage Trust, registered charity no. 254196". Charity Commission for England and Wales.

Coordinates: 53°4′15″N2°2′34″W / 53.07083°N 2.04278°W / 53.07083; -2.04278