A coin capsule or is a type of plastic capsule designed to prevent coins from becoming damaged by protecting it from outside contaminants, scratches and drops while allowing the coin to be viewed through transparent plastic.
A coin capsule or is a type of plastic capsule designed to prevent coins from becoming damaged by protecting it from outside contaminants, scratches and drops while allowing the coin to be viewed through transparent plastic.
Similar to capsules, Coin slabs are a way to encapsulate coins commonly used by coin grading services; coin capsules are used by coin collectors, or numismatists to store and keep coins safe. [1] The varied nature of coin sizes has led to a wide range of differently sized capsules becoming available each offer different levels or protection or security. [2] Some types of capsules are designed with the ability to be reopened while others, once closed cannot be reopened without damaging the capsule. Many capsules now come with adjustable foam inserts in order to prevent inserted coins from moving around inside the capsule. Starting from 20mm, they can vary in sizes, including 31mm, 35mm, 44mm and 50mm.
A butt plug is a sex toy that is designed to be inserted into the rectum for sexual pleasure. They are similar to a dildo in some ways but tend to be shorter and have a flanged end to prevent the device from being lost inside the rectum.
A screwdriver is a tool, manual or powered, used for turning screws.
A tray is a shallow platform designed for the carrying of items. It can be fashioned from numerous materials, including silver, brass, sheet iron, paperboard, wood, melamine, and molded pulp. Trays range in cost from inexpensive molded pulp trays which are disposable and inexpensive melamine trays used in cafeterias, to mid-priced wooden trays used in a home, to expensive silver trays used in luxury hotels. Some examples have raised galleries, handles, and short feet for support.
Injection moulding is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals, glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated barrel, mixed, and injected into a mould cavity, where it cools and hardens to the configuration of the cavity. After a product is designed, usually by an industrial designer or an engineer, moulds are made by a mould-maker from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection moulding is widely used for manufacturing a variety of parts, from the smallest components to entire body panels of cars. Advances in 3D printing technology, using photopolymers that do not melt during the injection moulding of some lower-temperature thermoplastics, can be used for some simple injection moulds.
A grommet is a ring or edge strip inserted into a hole through thin material, typically a sheet of textile fabric, sheet metal or composite of carbon fiber, wood or honeycomb. Grommets are generally flared or collared on each side to keep them in place, and are often made of metal, plastic, or rubber. They may be used to prevent tearing or abrasion of the pierced material or protection from abrasion of the insulation on the wire, cable, line being routed through the penetration, and to cover sharp edges of the piercing, or all of the above.
Optical disc packaging is the packaging that accompanies CDs, DVDs, and other formats of optical discs. Most packaging is rigid or semi-rigid and designed to protect the media from scratches and other types of exposure damage.
A tracheal tube is a catheter that is inserted into the trachea for the primary purpose of establishing and maintaining a patent airway and to ensure the adequate exchange of oxygen and carbon dioxide.
A banana connector is a single-wire electrical connector used for joining wires to equipment. The term 4 mm connector is also used, especially in Europe, although not all banana connectors will mate with 4 mm parts, and 2 mm banana connectors exist. Various styles of banana plug contacts exist, all based on the concept of spring metal applying outward force into the unsprung cylindrical jack to produce a snug fit with good electrical conductivity. Common types include: a solid pin split lengthwise and splayed slightly, a tip of four leaf springs, a cylinder with a single leaf spring on one side, a bundle of stiff wire, a central pin surrounded by a multiple-slit cylinder with a central bulge, or simple sheet spring metal rolled into a nearly complete cylinder. The plugs are frequently used to terminate patch cords for electronic test equipment such as laboratory power supply units, while sheathed banana plugs are common on multimeter probe leads.
Gashapon (ガシャポン), also called gachapon (ガチャポン), is a trademark of Bandai. Among the variety of vending machine-dispensed capsule toys that originated in the 1960s, it became popular in Japan and elsewhere. "Gashapon" is onomatopoeic from the two sounds "gasha" for the hand-cranking action of a toy-vending machine, and "pon" for the toy capsule landing in the collection tray. "Gashapon" is used for both the machines themselves and the toys obtained from them. Popular capsule toy manufacturers include Tomy, which uses the trademark gacha for their capsule machines, and Kaiyodo. In many countries and territories including Japan, China, United States, European Union and the United Kingdom, "Gashapon" is a registered trademark of Bandai. The model of capsule toy has been adapted digitally into numerous gacha video games, such as mobile phone games and massively multiplayer online games (MMOs).
A washer is a thin plate with a hole that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring, wear pad, preload indicating device, locking device, and to reduce vibration.
Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets. They are generally used in polyphase systems, with high currents, or when protection from environmental hazards is required. Industrial outlets may have weatherproof covers, waterproofing sleeves, or may be interlocked with a switch to prevent accidental disconnection of an energized plug. Some types of connectors are approved for hazardous areas such as coal mines or petrochemical plants, where flammable gas may be present.
A currency detector or currency validator is a device that determines whether notes or coins are genuine or counterfeit. These devices are used in a wide range of automated machines, such as retail kiosks, supermarket self checkout machines, arcade gaming machines, payphones, launderette washing machines, car park ticket machines, automatic fare collection machines, public transport ticket machines, and vending machines.
A cable tie is a type of fastener for holding items together, primarily electrical cables and wires. Because of their low cost, ease of use, and binding strength, cable ties are ubiquitous, finding use in a wide range of other applications. Cable ties were first manufactured by Thomas & Betts under the brand name Ty-Rap.
The Advanced Test Reactor (ATR) is a research reactor at the Idaho National Laboratory, located east of Arco, Idaho. This reactor was designed and is used to test nuclear fuels and materials to be used in power plants, naval propulsion, research and advanced reactors. It can operate at a maximum thermal power of 250 MW and has a "Four Leaf Clover" core design that allows for a variety of testing locations. The unique design allows for different neutron flux conditions in various locations. Six of the test locations allow an experiment to be isolated from the primary cooling system, providing its own environment for temperature, pressure, flow and chemistry, replicating the physical environment while accelerating the nuclear conditions.
A laboratory centrifuge is a piece of laboratory equipment, driven by a motor, which spins liquid samples at high speed. There are various types of centrifuges, depending on the size and the sample capacity.
Cable carriers, also known as drag chains, energy chains, or cable chains depending on the manufacturer, are guides designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery. They reduce wear and stress on cables and hoses, prevent entanglement, and improve operator safety.
A battery holder is one or more compartments or chambers for holding a battery. For dry cells, the holder must also make electrical contact with the battery terminals. For wet cells, cables are often connected to the battery terminals, as is found in automobiles or emergency lighting equipment.
A 45 rpm adapter is a small plastic or metal insert that goes in the middle of a 45-rpm record so it can be played on the standard size spindle of a turntable. The adapter could be a small solid circle that fits onto the spindle or a larger adapter that fits over the entire spindle of a record changer, permitting a stack of 45s to be played. These are often referred to as 45 spindles. A few manufacturers supplied a complete change of spindle for 45s.
Coin collectors have various options for storing their coin collections. The various options depend on a few different requirements such as; protection from oxidation and other chemical damage, protection from mechanical damage, ease of viewing and organization, and protection from loss or theft.
| Numismatics |
|  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Grading | |||||||||
| Supplies | |||||||||
| Other |
| ||||||||
