Colonial Ship King George

Last updated

Sydney cove by Lewin.jpg
Painting by John Lewin possibly showing King George with her yards lowered undergoing hull maintenance in Sydney Cove c.1808
History
Civil Ensign of the United Kingdom.svg
NameKing George
BuilderUnderwood and Kable, Sydney, New South Wales
Laid down1804
LaunchedApril 1805
CompletedMay 1805
Fate Hulk in 1820s
General characteristics
Type Whaler / cargo ship
Tons burthen180, or 185, or 188, or 200 (bm)
Length87 ft 6 in (26.67 m) o/a
Beam22 ft 7 in (6.88 m)
Depth of hold14 ft (4.3 m)
Sail plan Full-rigged ship

Colonial Ship King George was the first ship, by virtue of having three masts, built in the colony of Sydney, New South Wales.

King George was described variously as a square-rigged ship and a three-masted schooner, known in America during the later 19th century as a "tern". The confusion is due to her being modeled on the Baltimore-built three-masted schooners that had sail plans which resembled the square-rigged ships. These ships came into use in the later half of the 18th century, [1] and would have been known to James Underwood, the shipyard builder. Their distinctive sail plan feature was in having the extremely large fore and main courses, and only the fore and main topsails, with the mizzen mast rigged with the mainsail and main-topsail in place of the spanker, a plan based on the two-masted Boston pilot schooner that eventually evolved into the famed Baltimore clippers in the 1830s. [2] The fore and staysail booms were omitted to allow stowage of extra whaling boats and other equipment.

James Underwood undertook to build the ship with Messrs. Kable and Co. as partners and using a bond of £2,000 from Simeon Lord, a prominent colonial personality. One difficulty in securing permission to build the ship was due to the proclamation by Governor King of disallowing the building of any ship that could compete with the East India Company's trade in the Asian waters. Later Lord would try to get around the provisions by asking permission to send King George to Fiji for sandalwood, and then to China for "a cargo". [3]

Underwood and Kable were responsible for a number of smaller vessels and sloops, but fully-rigged King George would be their most ambitious construction. The keel was laid down in 1804, and she was completed with an overall length of 87 feet, a beam of 22 feet 7 inches and a 14 feet hold. Her burthen was computed at upwards of 200 tons but she is mentioned by other sources as having a burthen of 180 or 185 tons. Launched in April 1805, [4] she completed fit-out and was registered in May 1805. [5]

Drawing for the Flying Fish class, which King George would have resembled, modeled on an American vessel, sent to Bermudian builders by the British Admiralty. Flying Fish Baltimore clipper.jpg
Drawing for the Flying Fish class, which King George would have resembled, modeled on an American vessel, sent to Bermudian builders by the British Admiralty.

It is highly probable that Governor King recognised the need for the colony to have a substantial and fast ship in case of emergencies, and to maintain better communications with the rest of the British Empire from such a far outpost, but due to the considerations of the East India Company's monopoly King George was fitted out as a whaler "expected to proceed on the sperm fishery of the coast of New Zealand" [6] This was an entirely sound commercial decision due to the rapid development of the whaling industry off the Australian Eastern coast, with three whalers arriving in the Third Fleet, soon followed by more, including from America.

Indeed, her initial cruises were mostly in conducting whaling and seal trapping as The [Sydney] Gazette on 10 August 1806 recorded the arrival of "the private colonial ship King George, from a successful cruise, in which she had the good fortune to kill fifteen black whale." [7] She spent the next several years in the southern waters, under her Master S. R. Chace, when she was spotted by Perseverance towards the end of November in 1809 at the Aucklands after she sailed from Sydney in June 1809. During this early part of her history she is known as a whaling ship King George, which regularly left Port Jackson on a whale and seal hunt. However, complying with trade restrictions these were short cruises, and for example on 2 March 1810, she "arrived with skins and [whale] oil, having been at the entrance of the Bay of Islands 18 days previous."

However, soon the colonial policy was relaxed, and she was reported returning from sailing under Captain L. Jones, "from the sperm whale fishery, having procured from 30 to 35 tons of oil; out 14 months.", [8] a cruise that would have taken her to many other ports around the Pacific Ocean.

Later in her history King George took on cargo and general trade cruises, when she "last returned from the Bay of Islands and Marquesas, laden with sandal wood and pork, the Colonial Ship, King George, Captain Beveridge." [9] This was one of her last cruises from Port Jackson, and King George finished her life in Sydney as a hulk in 1820s.

Related Research Articles

Sail plan Diagram of the masts, spars, rigging, and sails of a sailing vessel

A sail plan is a description of the specific ways that a sailing craft is rigged. Also, the term “sail plan” is a graphic depiction of the arrangement of the sails for a given sailing craft.

Brigantine Two-masted sailing vessel

A brigantine is a two-masted sailing vessel with a fully square-rigged foremast and at least two sails on the main mast: a square topsail and a gaff sail mainsail. The main mast is the second and taller of the two masts.

A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its tack is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails on a modern boat.

Topsail

A topsail ("tops'l") is a sail set above another sail; on square-rigged vessels further sails may be set above topsails.

Square rig Generic type of sail and rigging arrangement

Square rig is a generic type of sail and rigging arrangement in which the primary driving sails are carried on horizontal spars which are perpendicular, or square, to the keel of the vessel and to the masts. These spars are called yards and their tips, beyond the last stay, are called the yardarms. A ship mainly rigged so is called a square-rigger.

Jackass-barque

A jackass-barque, sometimes spelled jackass bark, is a sailing ship with three masts, of which the foremast is square-rigged and the main is partially square-rigged and partially fore-and-aft rigged (course). The mizzen mast is fore-and-aft rigged.

Whaling in Australia

Whaling in Australian waters began in 1791 when five of the 11 ships in the Third Fleet after landing their passengers and freight at Sydney Cove then left Port Jackson to engage in whaling and seal hunting off the coast of Australia and New Zealand. The two main species hunted by such vessels in the early years were right and sperm whales. Later, humpback, bowhead and other whale species would be taken.

<i>Shenandoah</i> (schooner)

The Shenandoah is a 108-foot (33 m) topsail schooner built in Maine in 1964. Operating as a cruise ship and educational vessel in the waters of Vineyard Haven Harbor, Martha's Vineyard, Massachusetts, she is claimed to be the only schooner of her size and topsail rig without an engine within the world.

Alma Doepel

The Alma Doepel is a three-masted topsail schooner and is one of the oldest such ships surviving.

HMCS Integrity was a cutter built by the Colonial Government of New South Wales in 1804. She was the first vessel ever launched from a New South Wales dockyard and carried goods between the colony's coastal settlements of Norfolk Island, Newcastle, New South Wales, Van Diemen's Land and Port Jackson. In 1804 she took part in a series of voyages to Van Diemen's Land with the aim of founding a colony at Port Dalrymple, the site of the modern settlement of George Town, Tasmania.

<i>Britannia</i> (1783 whaler)

Britannia was a 301 burthen ton full-rigged whaler built in 1783 in Bridport, England, and owned by the whaling firm Samuel Enderby & Sons. She also performed two voyages transporting convicts to Port Jackson. She was wrecked in 1806 off the coast of New South Wales.

Alexandria was a cargo-carrying three-masted schooner built in 1929. Originally named Yngve, she was built at Björkenäs, Sweden, and fitted with a 58 H.P. auxiliary oil engine.

Albion was a full-rigged whaler built at Deptford, England, and launched in 1798. She made five whaling voyages to the seas around New South Wales and New Zealand. The government chartered her in 1803 to transport stores and cattle, to Risdon Cove on the River Derwent, Tasmania.

<i>Regina Maris</i> (schooner)

The sailing ship Regina Maris was originally built as the three-masted topsail schooner Regina in 1908. She was a 144-foot (43.9-meter), wooden, completely fore-and-aft–rigged sailing ship with three masts. She was re-rigged in 1963 as a 148-foot (45.1-meter) barquentine. Regina Maris could reach a speed of up to 12 knots, especially on a half-wind course or with a fresh back-stay breeze.

<i>Independence</i> (schooner)

Independence, a 35-ton schooner, was the first ship constructed in South Australian waters. The crew of the visiting American sealing brig Union, under the command of Capt. Isaac Pendleton, built her between April and August 1803 at what is now known as American River on Kangaroo Island. Daniel Wright, the ship's carpenter, was in charge of the construction of the Independence at the mouth of Ship Creek, 800m west of the present-day American River oval.

<i>Amazing Grace</i> (ship) Topsail schooner ship

Amazing Grace is an 83' topsail schooner. Her home port is in San Juan, Puerto Rico. The ship serves as the platform for the non-profit Maritime Leadership and is also available for private charters and memorials at sea. Maritime Leadership provides traditional sail training adventures through sailings ranging from 3–48 hours.

Multiple British vessels have been named King George for one of the members of the British monarchs:

Alexander was a 301-ton merchant vessel launched at Shields in 1801. She became a whaler and made a voyage to New Zealand and the South Seas whale fisheries for Hurry & Co. She was wrecked while outbound from Liverpool in October 1808.

HMS Coquette was launched in 1807 and spent her naval career patrolling in the Channel and escorting convoys. In 1813 she engaged an American privateer in a notable but inconclusive single-ship action. The Navy put Coquette in ordinary in 1814 and sold her in 1817. She became a whaler and made five whaling voyages before she was lost in 1835 on her sixth.

Policy was launched at Dartmouth in 1801. She was a whaler that made seven whaling voyages between 1803 and 1823. On her second whaling voyage, in 1804, she was able to capture two Dutch vessels. On her fourth voyage the United States Navy captured her, but the British Royal Navy recaptured her. She was lost at Tahiti in 1824 on her eighth whaling voyage.

References

  1. Chapelle, Howard I., The search for speed under sail, 1700-1855, Bonanza, New York, 1967, pp. 169–170
  2. Building the Baltimore Pilot Schooner Arrow, Michael Higgins
  3. G. J. Abbott, Noel Bede Nairn, Economic growth of Australia 1788-1821, 1969 p.297
  4. Australian economic history review: Volumes 8-9, 1968
  5. J.C.H. Gill, Genesis of the Australian Whaling Industry: Its Development Up To 1850, (Read at a Meeting of the Society on 24 March 1966).p.124 Sydney Gazette, 21 Feb. 1805, p. 2 col. b.
  6. The Sydney gazette and New South Wales advertiser: Volume 3 Public Library of New South Wales - 1805 Page xcviii
  7. Margaret Steven, Merchant Campbell, 1769-1846: a study of colonial trade, 1965, p.145
  8. The Sydney Gazette and New South Wales Advertiser (NSW : 1803 - 1842) Saturday 20 February 1813, page 2
  9. William Charles Wentworth, A statistical, historical, and political description of the colony..., 1820, p.18