Color index, as a geological term, is a measure of the ratio between generally dark mafic minerals and generally light felsic minerals in an igneous rock. [1] [2] The color index of an igneous rock is the volume percentage of mafic minerals in the rock, excluding minerals generally regarded as "colorless" such as apatite, muscovite, primary carbonates and similar minerals. [1] Rocks can be sorted into classes by several systems based on their color index, including into leucocratic and melanocratic rocks, or into (mineralogically) felsic and mafic rocks.
With an accuracy within 1%, color index can be determined by applying a microscope to a flat, planar section of rock and employing a point counting technique to determine the amount of light or dark rock. [2] In the field, it can be generally estimated visually from hand specimens. [2]
The most common light-colored (felsic) minerals are the feldspars, feldspathoids, and silica or quartz. [2] Common dark-colored (mafic) minerals include olivine, pyroxene, amphibole, biotite, tourmaline, iron oxides, sulfides, and metals. [2] In their pure form, felsic minerals have a color index of 0, and mafic minerals have a color index of 100, due to being composed entirely of themselves.
Based on their color index, rocks can be classified as melanocratic (higher color index), leucocratic (lower color index), or mesocratic (middle color index), as well as hololeucocratic and holomelanocratic (extremes to either side). [1] For example, leucocratic granite would be brighter and have a lower color index than regular granite. [1] The exact percentages separating the classes vary between petrologists. [1]
According to Comenius University in Bratislava's Atlas of Magmatic rocks, color indices 0–10 are hololeucocratic, 10–35 are leucocratic, 35–65 are mesocratic, 65–90 are melanocratic, and 90–100 are holomelanocratic. [1] According to the Encyclopedia of Igneous and Metamorphic Petrology (1989), and the American Geological Institute Glossary of Geology and Related Sciences (1957), color indices 0–30 are leucocratic, 30–60 are mesocratic, and 60–100 are melanocratic. [3] [4] The Oxford Dictionary of Earth Sciences (2013, 4 ed.) gives a third definition in which color indices 0–5 are hololeucocratic, 5–30 are leucocratic, 30–60 are mesocratic, and 60–90 are melanocratic, not defining holomelanocratic. [5] Some of these definitions are listed below:
Term | Atlas of Magmatic Rocks [1] | American Geological Institute 1957, [3] Encyclopedia of Igneous and Metamorphic Petrology 1989 [4] | Oxford Dictionary of Earth Sciences 2013 [5] |
---|---|---|---|
Hololeucocratic | 0–10 | N/A | 0–5 |
Leucocratic | 10–35 | 0–30 | 5–30 |
Mesocratic | 35–65 | 30–60 | 30–60 |
Melanocratic | 65–90 | 60–100 | 60–90 |
Holomelanocratic | 90–100 | N/A | ??? |
Another classification of color index is into (mineralogically) felsic and mafic rocks. [6] Rocks with low color indices are felsic, and those with higher color indices are mafic, [6] although the exact thresholds used vary. This terminology conflicts with the definition [7] [8] of felsic and mafic rocks based on silica content. [6] For example, a rock composed entirely of pyroxene would contain about 50% silica. [6] Its silica content (by one common classification) would make it a mafic rock in chemical terms, but an ultramafic rock in mineralogical terms, because it would be entirely composed of a mafic mineral. [6] Some examples of felsic rocks include granite and rhyolite, while examples of mafic rocks include gabbro and basalt. [1]
According to the Encyclopædia Britannica, color indices, 0–50 are felsic, 50–90 are mafic, and 90–100 are ultramafic. [6] An online geology textbook provides an example of the use of another classification scheme, in which color indices 0–15 are felsic, 15–45 are intermediate, 45–85 are mafic, and 85–100 are ultramafic. [9]
Term | Britannica | Geology textbook |
---|---|---|
Felsic | 0–50 | 0–15 |
Intermediate | N/A | 15–45 |
Mafic | 50–90 | 45–85 |
Ultramafic | 90–100 | 85–100 |
Speaking broadly, mineral color points out the specific gravity of the mineral, as minerals that are lighter in color tend to be less dense. Darker minerals typically tend to contain more of relatively heavy elements, notably iron, magnesium, and calcium. [2]
The temperature of crystallization affects what the color index of rocks tends to be. [10]
In geology, felsic is a modifier describing igneous rocks that are relatively rich in elements that form feldspar and quartz. It is contrasted with mafic rocks, which are richer in magnesium and iron. Felsic refers to silicate minerals, magma, and rocks which are enriched in the lighter elements such as silicon, oxygen, aluminium, sodium, and potassium. Molten felsic magma and lava is more viscous than molten mafic magma and lava. Felsic magmas and lavas have lower temperatures of melting and solidification than mafic magmas and lavas.
Gabbro is a phaneritic, mafic intrusive igneous rock formed from the slow cooling magma into a holocrystalline mass deep beneath the Earth's surface. Slow-cooling, coarse-grained gabbro is chemically equivalent to rapid-cooling, fine-grained basalt. Much of the Earth's oceanic crust is made of gabbro, formed at mid-ocean ridges. Gabbro is also found as plutons associated with continental volcanism. Due to its variant nature, the term gabbro may be applied loosely to a wide range of intrusive rocks, many of which are merely "gabbroic". By rough analogy, gabbro is to basalt as granite is to rhyolite.
A mafic mineral or rock is a silicate mineral or igneous rock rich in magnesium and iron. Most mafic minerals are dark in color, and common rock-forming mafic minerals include olivine, pyroxene, amphibole, and biotite. Common mafic rocks include basalt, diabase and gabbro. Mafic rocks often also contain calcium-rich varieties of plagioclase feldspar. Mafic materials can also be described as ferromagnesian.
Amphibole is a group of inosilicate minerals, forming prism or needlelike crystals, composed of double chain SiO
4 tetrahedra, linked at the vertices and generally containing ions of iron and/or magnesium in their structures. Its IMA symbol is Amp. Amphiboles can be green, black, colorless, white, yellow, blue, or brown. The International Mineralogical Association currently classifies amphiboles as a mineral supergroup, within which are two groups and several subgroups.
Andesite is a volcanic rock of intermediate composition. In a general sense, it is the intermediate type between silica-poor basalt and silica-rich rhyolite. It is fine-grained (aphanitic) to porphyritic in texture, and is composed predominantly of sodium-rich plagioclase plus pyroxene or hornblende.
Phonolite is an uncommon shallow intrusive or extrusive rock, of intermediate chemical composition between felsic and mafic, with texture ranging from aphanitic (fine-grained) to porphyritic (mixed fine- and coarse-grained). Phonolite is a variation of the igneous rock trachyte that contains nepheline or leucite rather than quartz. It has an unusually high (12% or more) Na2O + K2O content, defining its position in the TAS classification of igneous rocks. Its coarse grained (phaneritic) intrusive equivalent is nepheline syenite. Phonolite is typically fine grained and compact. The name phonolite comes from the Ancient Greek meaning "sounding stone" due to the metallic sound it produces if an unfractured plate is hit; hence, the English name clinkstone is given as a synonym.
Amphibolite is a metamorphic rock that contains amphibole, especially hornblende and actinolite, as well as plagioclase feldspar, but with little or no quartz. It is typically dark-colored and dense, with a weakly foliated or schistose (flaky) structure. The small flakes of black and white in the rock often give it a salt-and-pepper appearance.
Anorthosite is a phaneritic, intrusive igneous rock characterized by its composition: mostly plagioclase feldspar (90–100%), with a minimal mafic component (0–10%). Pyroxene, ilmenite, magnetite, and olivine are the mafic minerals most commonly present.
Diorite is an intrusive igneous rock formed by the slow cooling underground of magma that has a moderate content of silica and a relatively low content of alkali metals. It is intermediate in composition between low-silica (mafic) gabbro and high-silica (felsic) granite.
Peridotite ( PERR-ih-doh-tyte, pə-RID-ə-) is a dense, coarse-grained igneous rock consisting mostly of the silicate minerals olivine and pyroxene. Peridotite is ultramafic, as the rock contains less than 45% silica. It is high in magnesium (Mg2+), reflecting the high proportions of magnesium-rich olivine, with appreciable iron. Peridotite is derived from Earth's mantle, either as solid blocks and fragments, or as crystals accumulated from magmas that formed in the mantle. The compositions of peridotites from these layered igneous complexes vary widely, reflecting the relative proportions of pyroxenes, chromite, plagioclase, and amphibole.
Komatiite is a type of ultramafic mantle-derived volcanic rock defined as having crystallised from a lava of at least 18 wt% magnesium oxide (MgO). It is classified as a 'picritic rock'. Komatiites have low silicon, potassium and aluminium, and high to extremely high magnesium content. Komatiite was named for its type locality along the Komati River in South Africa, and frequently displays spinifex texture composed of large dendritic plates of olivine and pyroxene.
A QAPF diagram is a doubled-triangle plot diagram used to classify intrusive igneous rocks based on their mineralogy. The acronym QAPF stands for "Quartz, Alkali feldspar, Plagioclase, Feldspathoid (Foid)", which are the four mineral groups used for classification in a QAPF diagram. The percentages (ratios) of the Q, A, P and F groups are normalized, i.e., recalculated so that their sum is 100%.
Cumulate rocks are igneous rocks formed by the accumulation of crystals from a magma either by settling or floating. Cumulate rocks are named according to their texture; cumulate texture is diagnostic of the conditions of formation of this group of igneous rocks. Cumulates can be deposited on top of other older cumulates of different composition and colour, typically giving the cumulate rock a layered or banded appearance.
In geology, igneous differentiation, or magmatic differentiation, is an umbrella term for the various processes by which magmas undergo bulk chemical change during the partial melting process, cooling, emplacement, or eruption. The sequence of magmas produced by igneous differentiation is known as a magma series.
Fractional crystallization, or crystal fractionation, is one of the most important geochemical and physical processes operating within crust and mantle of a rocky planetary body, such as the Earth. It is important in the formation of igneous rocks because it is one of the main processes of magmatic differentiation. Fractional crystallization is also important in the formation of sedimentary evaporite rocks.
In geology, an igneous intrusion is a body of intrusive igneous rock that forms by crystallization of magma slowly cooling below the surface of the Earth. Intrusions have a wide variety of forms and compositions, illustrated by examples like the Palisades Sill of New York and New Jersey; the Henry Mountains of Utah; the Bushveld Igneous Complex of South Africa; Shiprock in New Mexico; the Ardnamurchan intrusion in Scotland; and the Sierra Nevada Batholith of California.
In geology, a metamorphic zone is an area where, as a result of metamorphism, the same combination of minerals occur in the bedrock. These zones occur because most metamorphic minerals are only stable in certain intervals of temperature and pressure.
Igneous rock, or magmatic rock, is one of the three main rock types, the others being sedimentary and metamorphic. Igneous rocks are formed through the cooling and solidification of magma or lava.
Acidic rock or acid rock refers to the chemical composition of igneous rocks that has 63% wt% SiO2 content. Rocks described as acidic usually contain more than 20% of free quartz. Typical acidic rocks are granite or rhyolite.
{{cite book}}
: CS1 maint: others (link){{cite book}}
: CS1 maint: others (link)