Colorado I (sternwheeler)

Last updated

Colorado, was a stern-wheel paddle-steamer, the third steamboat on the Colorado River, and first stern-wheel steamboat put on that river, in December 1855.

The Colorado was a 120 foot long, stern-wheel steamboat, built for the George A. Johnson & Company in San Francisco by John G. North a well known builder of steamboats in California. [1] It was equipped with an 80-horsepower steam engine capable of carrying up to 70 tons of cargo while drawing only 2 feet of water. North subsequently disassembled and shipped in sections by sea to the estuary of the Colorado River. There North unloaded, reassembled and launched in it in December, 1855 under the command of Captain Isaac Polhamus. More powerful than Johnson's first steamboat, the side-wheeler General Jesup, it made faster runs between the estuary and Fort Yuma with larger cargoes against strong currents in the river. As a stern-wheeler it was narrower, with a lesser draft, so was better equipped to avoid or pass over sandbars and through the narrower sloughs that sometimes occurred on the ever-changing course of the old Colorado River Delta. Besides running cargoes between Fort Yuma from the estuary, it was used with the General Jesup to carry supplies and soldiers up river during the 1858-59 Mohave War and for the establishment of Fort Mohave. The steamboats were engaged to carry the troops and supplies up river for at $500 per day. [2] : 16, 24, 29 

At the end of its service life the first Colorado's hull was dismantled in April, 1862. Its engine and boiler was removed and used to equip the new, larger stern-wheeler Colorado that was built and launched under the guns of Fort Yuma, in Arizona City, for fear of an attack by Confederate raiders. [2] : 41 

Related Research Articles

<span class="mw-page-title-main">Port Isabel, Sonora</span>

Port Isabel was a seaport established on Port Isabel Slough in 1865 during the American Civil War in Sonora, Mexico in the mouth of the Colorado River on the Gulf of California. It was founded to support the increased river traffic caused by the gold rush that began in 1862 on the Colorado River and the Yuma Quartermaster Depot newly established in 1864 to support the Army posts in the Arizona Military District. The slough was discovered in 1865 by the Captain W. H. Pierson of the schooner Isabel, that first used the slough to transfer its cargo to steamboats safe from the tidal bore of the Colorado River. Shortly afterward Port Isabel was established 3 miles up the slough and replaced Robinson's Landing as the place where cargo was unloaded in the river from seagoing craft on to flat bottomed steamboats of the Colorado River and carried up to Fort Yuma and points further north on the river.

George Alonzo Johnson (1824–1903) 49er, entrepreneur, and California politician.

<span class="mw-page-title-main">Steamboats of the Colorado River</span> Overview of steamboats on the Colorado River

Steamboats on the Colorado River operated from the river mouth at the Colorado River Delta on the Gulf of California in Mexico, up to the Virgin River on the Lower Colorado River Valley in the Southwestern United States from 1852 until 1909, when the construction of the Laguna Dam was completed. The shallow draft paddle steamers were found to be the most economical way to ship goods between the Pacific Ocean ports and settlements and mines along the lower river, putting in at landings in Sonora state, Baja California Territory, California state, Arizona Territory, New Mexico Territory, and Nevada state. They remained the primary means of transportation of freight until the advent of the more economical railroads began cutting away at their business from 1878 when the first line entered Arizona Territory.

David C. Robinson, was a steamboat captain on the Colorado River from 1857 to 1873.

James Turnbull was the first steamboat captain on the Colorado River. His voyages supplying the Army at Fort Yuma demonstrated that the river was navigable by steamboats.

Uncle Sam, was a side-wheel paddle steamer and the first steamboat on the Colorado River in 1852.

Capacity was an American schooner that arrived in San Francisco on January 9, 1852. The Capacity under Captain Driscoll, subsequently was hired by Captain James Turnbull to carry a cargo of U. S. Army supplies for Fort Yuma. It would also carry the engine, boiler and wood to assemble the side-wheel paddle steamer tug, Uncle Sam to the Colorado River Delta. The Uncle Sam would be the first of many steamboats on the Colorado River.

Explorer was a small, custom-made stern-wheel steamboat built for Second lieutenant Joseph Christmas Ives and used by him to carry the U. S. Army Corps of Topographical Engineers expedition to explore the Colorado River above Fort Yuma in 1858.

Cocopah, was a stern-wheel paddle-steamer, the fifth steamboat on the Colorado River, first put on the river in August 1859.

General Jesup was a side-wheel paddle-steamer, named for General Thomas Jesup then Quartermaster General of the United States Army, and was the second steamboat launched on the Colorado River, in 1854.

Cocopah II (Sternwheeler) Colorado River steamboat

Cocopah II, was a stern-wheel paddle-steamer, the tenth steamboat on the Colorado River, first put on the river in 1867.

<i>Colorado II</i> (sternwheeler) Colorado River steamboat

Colorado, second of its name on the Colorado River, was a stern-wheel paddle-steamer, rebuilt from the original Colorado was the fifth steamboat on the Colorado River. It was first put on the river in December 1862.

<span class="mw-page-title-main">John Gunder North</span>

John Gunder North was a Norwegian born ship builder in San Francisco. During his career, he built 273 hulls of all kinds with 53 bay and river steamers, including the famed paddle steamers Chrysopolis, Yosemite and Capital.

Esmerelda, was a stern-wheel paddle-steamer, built for the Sacramento River trade, in 1864 it became the first of the opposition steamboats on the Colorado River. It was also the first steamboat to tow large cargo barges on that river, in May 1864 and to reach Callville, Nevada in 1866.

Benjamin Minturn Hartshorne (1826–1900) was a California businessman who immigrated during the California Gold Rush. He was involved in Sacramento River and Colorado River steamboats as well as maritime shipping.

Mohave was the first stern-wheel steamboat of that name running on the Colorado River between 1864 and 1875.

Nina Tilden, one of the two opposition stern-wheel steamboats that ran on the Colorado River from 1864 to 1868. Purchased by George A. Johnson Company it ran on the Colorado River from 1868 until 1874.

Alfred Henry Wilcox (1823-1883), sea captain, later Colorado River pioneer and steamboat and steamship entrepreneur, partner in the George A. Johnson & Company and of the Colorado Steam Navigation Company, banker and director of the California & Mexican Steam Ship Line.

George A. Johnson & Company was a partnership between three men who pioneered navigation on the Colorado River. Benjamin M. Hartshorne, George Alonzo Johnson and Alfred H. Wilcox. The George A. Johnson & Company was formed in the fall of 1852, and was reorganized as the Colorado Steam Navigation Company in 1869.

Sierra Nevada was a schooner, used as a transport for the U. S. Army Department of the Pacific in California to carry supplies for Fort Yuma to the mouth of the Colorado River in 1853–1854.

References


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.