Continental Copters Jet-Cat

Last updated
JC-1 Jet-Cat
RoleAgricultural helicopter
Manufacturer Continental Copters
First flight 1978
Produced1

The Continental Copters JC-1 Jet-Cat was an agricultural helicopter developed in the United States in the 1970s. Following the success that Continental Copters had enjoyed in converting Bell 47 airframes into specialized agricultural machines as the El Tomcat, the firm embarked on a project of creating a turbine-powered equivalent by converting a Bell 206. Like the El Tomcat, the Jet-Cat was to be only a single-seat aircraft with a fuselage radically reconfigured from its original design. The Jet-Cat was also equipped to carry slung loads.

Work began in 1976, but was soon interrupted in favour of a similar project to transform a Bell 204. Development of the Jet-Cat resumed the following year, and the aircraft (registration N9097T) made its first flight early in 1978. Shortly thereafter, Continental Copters ceased business and no further development took place.


Related Research Articles

Grumman F-14 Tomcat carrier-based air superiority fighter aircraft family

The Grumman F-14 Tomcat is an American supersonic, twin-engine, two-seat, twin-tail, variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter Experimental (VFX) program after the collapse of the F-111B project. The F-14 was the first of the American Teen Series fighters, which were designed incorporating air combat experience against MiG fighters during the Vietnam War.

Bell XP-52 Canceled fighter aircraft project

The Bell XP-52 and subsequent XP-59 were World War II fighter aircraft design projects by the American Bell Aircraft Corporation.

Variable-sweep wing Airplane wings capable of changing position to alter their geometry

A variable-sweep wing, colloquially known as a "swing wing", is an airplane wing, or set of wings, that may be swept back and then returned to its original straight position during flight. It allows the aircraft's shape to be modified in flight, and is therefore an example of a variable-geometry aircraft.

Fairey Rotodyne

The Fairey Rotodyne was a 1950s British compound gyroplane designed and built by Fairey Aviation and intended for commercial and military uses. A development of the earlier Gyrodyne, which had established a world helicopter speed record, the Rotodyne featured a tip-jet-powered rotor that burned a mixture of fuel and compressed air bled from two wing-mounted Napier Eland turboprops. The rotor was driven for vertical takeoffs, landings and hovering, as well as low-speed translational flight, but autorotated during cruise flight with all engine power applied to two propellers.

Bell X-14 Experimental vertical take-off and landing (VTOL) jet aircraft

The Bell X-14 is an experimental VTOL aircraft flown in the United States in the 1950s. The main objective of the project was to demonstrate vectored thrust horizontal and vertical takeoff, hover, transition to forward flight, and vertical landing.

Bell 407

The Bell 407 is a four-blade, single-engine, civil utility helicopter; a derivative of the Bell 206L-4 LongRanger. The 407 uses the four-blade, soft-in-plane design rotor with composite hub developed for the United States Army's OH-58D Kiowa Warrior instead of the two-blade, semi-rigid, teetering rotor of the 206L-4.

Bell 47

The Bell 47 is a single rotor single engine light helicopter manufactured by Bell Helicopter. It was based on the third Bell 30 prototype, which was the company's first helicopter designed by Arthur M. Young. The 47 became the first helicopter certified for civilian use on 8 March 1946. The first civilian delivery was made on December 31, 1946 to Helicopter Air Transport. More than 5,600 Bell 47s were produced, including those under license by Agusta in Italy, Kawasaki Heavy Industries in Japan, and Westland Aircraft in the United Kingdom. The Bell 47J Ranger is a modified version with a fully enclosed cabin and tail boom.

Bell XP-77 Experimental fighter aircraft

The Bell XP-77 development was initiated by the United States Army Air Forces during World War II to produce a simplified "lightweight" fighter aircraft using non-strategic materials. Despite being innovative, the diminutive prototype proved tricky to handle and the project was canceled when the XP-77 did not deliver its projected performance.

Grumman Ag Cat

The Grumman G-164 Ag Cat is a single-engine biplane agricultural aircraft, developed by Grumman in the 1950s.

Arsenal VG 70

The Arsenal VG 70 was a research aircraft flown in France shortly after World War II to assist development of high-speed jet fighters. A captured German Junkers Jumo 004 turbojet was built into a highly streamlined high-wing monoplane with all-swept flying surfaces. The semi-circular jet intake was located under the fuselage.

Marsh Aviation is an aircraft engineering, design, maintenance and re-manufacturing company, situated on East Falcon Drive, at Falcon Field in Mesa, Arizona. The company often works as a sub-contractor to well-known brand-name aerospace companies, discreetly designing and manufacturing components and sub-systems for high-profile programs. The company has also worked on a variety of aircraft programs for governments all over the world.

Blériot-SPAD S.33

The Bleriot-SPAD S.33 was a small French airliner developed soon after World War I. The aircraft was a biplane of conventional configuration whose design owed much to the Blériot company's contemporary fighter designs such as the S.20. Four passengers could be accommodated in an enclosed cabin within the monocoque fuselage, and a fifth passenger could ride in the open cockpit beside the pilot. A great success, the S.33 dominated its field throughout the 1920s, initially on CMA's Paris-London route, and later on continental routes serviced by Franco-Roumaine.

Klemm Kl 107

The Klemm Kl 107 was a two-seat light aircraft developed in Germany in 1940. It was a conventional low-wing cantilever monoplane of wooden construction with fixed tailwheel undercarriage. Wartime production totalled only five prototypes and some 20 production machines before the Klemm factory was destroyed by Allied bombing. Following World War II and the lifting of aviation restrictions on Germany, production recommenced in 1955 with a modernised version, the Kl 107B, of which Klemm built a small series before selling all rights to the design to Bölkow. This firm further revised the design and built it as the Kl 107C before using it as the basis for their own Bo 207.

McDonnell XV-1

The McDonnell XV-1 is an experimental gyrodyne developed by McDonnell Aircraft for a joint research program between the United States Air Force and the United States Army to explore technologies to develop an aircraft that could take off and land like a helicopter but fly at faster airspeeds, similar to a conventional airplane. The XV-1 would reach a speed of 200 mph, faster than any previous rotorcraft, but the program was terminated due to the tip-jet noise and complexity of the technology which gave only a modest gain in performance.

Continental Copters El Tomcat

The Continental Copters El Tomcat was a 1950s American single-seat agricultural helicopter converted from a Bell 47G by Continental Copters of Fort Worth Texas. The first helicopter first flew in 1959 and was followed by a number of variants.

Continental Copters was a US helicopter remanufacturer established by John L Scott in Fort Worth, Texas in 1959. The company's most significant product was the remanufacturing of Bell 47 airframes as specialised, single-seat agricultural aircraft as the El Tomcat. Continental Copters also assembled stock Bell 47s from spare parts.

Kellett XR-10

The Kellett XR-10 was a military transport helicopter developed in the United States in the 1940s that only flew in prototype form. It was designed in response to a USAAF Technical Instruction issued for the development of a helicopter to transport passengers, cargo, or wounded personnel within an enclosed fuselage. Kellett's proposal followed the general layout that the company was developing in the XR-8, with twin intermeshing rotors, and was accepted by the Air Force on 16 October over proposals by Sikorsky, Bell, and Platt-LePage.

PZL-126 Mrówka

The PZL-126 Mrówka (ant) is a Polish agricultural aircraft first flown in 1990. It is a diminutive low-wing monoplane of conventional if stubby appearance with a cruciform tail, an enclosed cabin and fixed, tricycle undercarriage. Significant parts of the design were undertaken by students at the training college attached to the PZL plant at Okęcie under the direction of Andrzej Słocinski, with the whole project treated initially as a platform for design innovation. Initial design work was completed in 1982 and detail work the following year. Plans to fly a prototype by 1985 were delayed by revisions to the aircraft's equipment, although a mockup was displayed at an agricultural aviation exhibition at Olsztyn that August. Legislation to outlaw certain agricultural chemicals was under consideration in Poland in the late 1980s, spurring interest in biological agents as an alternative and making a tiny aircraft like the Mrówka feasible as a useful piece of agricultural equipment.

References


See also