Crane-Simplex was the common name of the Simplex Crane Model 5 luxury automobile, produced by the Simplex Automobile Company in New Brunswick, New Jersey, from 1915 to 1918. [1]
Crane-Simplex Company was formed in 1922 in Long Island City, New York, by Henry M. Crane to resume production of the luxury car. [1]
 Simplex Service building in Queens, New York. Crane-Simplex factory was here in 1922. A portion of the building is extant at Vernon Blvd and 12th Street. | |
| Formerly | Simplex Automobile Company |
|---|---|
| Industry | Automotive |
| Founded | 1922 |
| Founder | Henry M. Crane |
| Defunct | 1923 |
| Fate | Discontinued |
| Headquarters | Long Island City, New York, |
Key people | Henry M. Crane |
| Products | Automobiles |
Production output | very few (1922-1923) |
| Brands | Crane-Simplex |
Wright-Martin sold the Simplex Automobile Company assets to Mercer Motors Company controlled by Emlen S. Hare in 1920. In July 1921 Hare's Motors announced it would be dissolved and the separate units would reorganize as individual companies. Simplex which was still not producing cars, reverted to Mercer ownership. By July 1922, a reorganization of Mercer Motors and reversal of its arrangements with Hare Motors was finally completed. [2] [3]
Organized on September 20 1922, Henry M. Crane announced the Crane-Simplex Company with the Long Island City, Queens, New York plant and assets being purchased from Mercer Motors, Inc., "with plans to revive his masterpiece" [4] Capitalized at $500,000, company offices were located at the United States Realty Building at 115 Broadway, with L. R. Ayers as President. John B. Bawden, Jr., formerly with Mercer was vice-president and general manager. Harvey B. Clark and Frederick H. Brand, formerly with Simplex were treasurer and assistant treasurer, respectively. [5] [6]
Crane-Simplex had controlling interest of Jephson-Scott Body Company [7] which was the successor of the J. M. Qumby & Company. Plans for 100 automobile chassis production per year were announced. [5] [6] Crane-Simplex stated bodies could be fitted from the Jephson-Scott factory in East Orange, NJ, although that was not required. [8]
In 1922 Jordan Motor Car Company listed the Jordan Touring Model MX with Crane Simplex running gear. [9] [10] Although Crane-Simplex was still listed as a company in 1926, no chassis manufacturing is recorded after 1923. [11]
In July 1922 Henry M. Crane became a consulting engineer and technical assistant to Alfred P. Sloan of General Motors. [12]
| Simple Crane Model 5 Crane-Simplex | |
|---|---|
 1916 Simplex Crane Model 5 Phaeton coachwork by Frederick R. Wood & Sons | |
| Overview | |
| Type | Passenger car |
| Manufacturer | Simplex Automobile Company |
| Also called | Crane-Simplex |
| Production | 1915-1918 |
| Assembly | New Brunswick, New Jersey |
| Designer | Henry M. Crane |
| Body and chassis | |
| Class | Luxury car |
The Crane Motor Company of Bayonne, New Jersey, built automobiles from 1912 to 1915. The Crane Model 3 was a six-cylinder car offered only as a chassis. The chassis was priced at $8,000 (equivalent to $219,340in 2021), the highest priced American chassis on the market. Crane favored Brewster & Company as a coachbuilder and most Crane automobiles were bodied by that firm. Only about 20 Crane Model 3s were made in 1912 and 1913. By 1914 a Model 4 was produced by Crane. It differed in having the six cylinders cast in two blocks of three instead of three pairs. [13]
In late 1914, the Simplex Automobile Company of New Brunswick, New Jersey bought Crane Motor Car Company to acquire his engineering advances. The Crane factory in Bayonne was sold to the Car Lighting & Power Company in August 1915. [14] [15] [16] Simplex was the maker of "one of the finest and most exclusive luxury cars built in the USA before World War I." [14] Crane became vice president and engineer for Simplex. [14] [17] [15]
The Crane Model 4, became the Simplex Crane Model 5. From the beginning of the announcement of the Simplex purchase of Crane, The Automobile magazine referred to the new car as Crane-Simplex, only mentioning later in the September 1915 article that it was the Crane model of Simplex [18] The article describes the new six cylinder shaft driven car with 100-hp at 2000-rpm. [18] In the August 1916 Automobile Topics magazine 2- page article, the new cars was described as the "Model 5 Simplex-Crane -- or plain Simplex". [19] Although never official, the Simplex Crane Model 5 would often be referred to as the Crane-Simplex. [1]
Crane created a new car called the Crane Model 46 H.P. Six-Cylinder Simplex or the Simplex-Crane Model 5, which was similar to his Crane Model 4, but on a longer wheelbase. [17] [20] The Model 5 was "fitted with a six-cylinder motor of 563 cubic inches piston displacement, developing a maximum of 110 h.p. The cylinders are of the L-head type and are cast in blocks of three, with the value springs fully enclosed." [21] This 5,300-pound car was fast—reaching up to 65 or 68 miles per hour. [22] [20] Owners also expected a smooth ride and effortless performance. [20] This was achieved with a new design for springs that reduced lateral shock when a wheel went into a pothole or if the driver took a curve at a high speed. [21] At the time, a newspaper reported, "The six-cylinder power plant on which the Crane-Simplex Company has established its reputation for mechanical excellence, is the result of H. M. Crane's engineering genius." [23]
Between 1915 and 1916, Crane designed and oversaw the fabrication of Crane-Simplex automobiles at the New Brunswick factory. [24] [17] Production was limited to 300 cars per year, the maximum output of the company's 800 employees who worked in three shifts, day and night. [25] Each engine went through the equivalent of 1,000 miles of road travel on a belt test that took 36 hours, as well as a block test of 48 hours. [22] The engines were tested for speed on the Vanderbilt track in Long Island. [22] Other road tests included driving on bumpy surfaces, in sand, and in the mountains. [22] In total, each engine was tested for the equivalent of 5,000 miles of travel before going to the customer. [22] "The car had to be right or Mr. Crane would not send it out," according to Walter B. Reynolds who was chief of the final road testing department for Simplex-Crane. [22]
Each Crane-Simplex was custom-built and high-priced for its era; the chassis was introduced at $5,000 (equivalent to $133,931in 2021) in 1915, increased to $6,000 in 1917, and to $7,000 (equivalent to $148,055in 2021) in 1918. [24] [17] [26] [21] The Model 5 chassis included a complete dashboard with instrumentation, front fenders, trimmed running boards, Goodrich Silvertown cord tires, an electric horn, headlamps, a reel-mounted trouble lamp, taillamp, a jack, and tools. [20] Based on the company's catalog, customers could choose between a limousine, landaulette-limousine, touring landaulette, and enclosed bodied coach to add to their chassis. [20] However, the seven-passenger touring model by Brewster & Company coachworks was the only body that went into regular production. [20] Other coachbuilders for Crane-Simplex customers include A. T. Demarest and Co., Healey & Co., and Holbrook Co. [27] [28] [29] [30] Adding a coach to the chassis cost $1,500 for the seven-passenger touring body or $2,000 for a custom coach. [26] [21]
In 1916, one of the company's executives noted, "We make the highest price car in the world." [25] However, it did have a market; as Horseless Age magazine wrote in its review of the Simplex-Crane Model 5, "There are always people who want only the very best and are willing to pay a good price for what to the ordinary purchaser may seem minor advantages." [21] John D. Rockefeller purchased two Simplex-Crane Model 5 cars, decked with summer and winter bodies. [31] [32] Other owners of a Crane-Simplex automobile include Alfred Atmore Pope, Theodate Pope Riddle, John D. Rockefeller, Jr., Herbert L. Satterlee, and Frederick William Vanderbilt. [32] [33] [22] In 1936, Satterlee invited Crane to drive his Simplex-Crane Model 5 as its speedometer turned to 300,000 miles.
In October 1915, the Wright Company of Garwood, New Jersey entered into an agreement to purchase Crane-Simplex. [34] Car production at New Brunswick ceased in October 1917 as Wright began making airplane engines for World War I. In all, 467 Simplex Crane Model 5s were produced. [1] [35] [36]
In January 1920, the Mercer Motor Company of Trenton, NJ under the control of Emlen S. Hare, would absorb the assets of the Simplex Automobile Company. Automobile equipment was relocated to the Vernon Avenue building in Queens which had been used as a service department. In February 1920 Hare's Motors, Incorporated was organized to take over the assets of Locomobile, Mercer and Simplex. [37] [38] [39] In July 1921 Hare's motors announced it would be dissolved and the separate units would reorganize as individual companies. Simplex which was still not producing cars, reverted to Mercer ownership. By July 1922, a reorganization of Mercer Motors and reversal of its arrangements with Hare Motors was finally completed. [5] [8]
Chalmers Motor Company was an American car company headquartered in Detroit, Michigan. The company started in 1908 and continued producing high-end vehicles until 1923, when it merged with Maxwell forming the basis for the Chrysler Corporation.
Billed as "a motor-car symphony", the American Simplex was an American automobile manufactured in Mishawaka, Indiana, United States, from 1906 to 1915 by the Simplex Motor Car Company; the company shortened its product's name to Amplex in 1910 to avoid confusion with the better-known, New York-based Simplex car, made by the Simplex Automobile Company. This change also coincided with a reorganization of the company. Originally the company manufactured a two-stroke four-cylinder 50hp model, later upsized to 6.8 liters and still rated at 50 hp. In 1910, three open-roof models and two enclosed models were offered, costing up to $5,400; the newly introduced 30/50 hp Toy Tonneau, a long, sleek four-door touring car, sold for $4,300. The Amplex's most distinctive feature was its valveless motor, which the company claimed would offer more continuous pulling power and greater reliability. The 1910 models also offered self-starting, a feature that would not be available from major competitors, such as Cadillac, for another year or two.
The Dort Motor Car Company of Flint, Michigan, built automobiles from 1915 to 1924.
The Stutz Motor Car Company, was an American producer of high-end sports and luxury cars based in Indianapolis, Indiana. Production began in 1911 and ended in 1935.
`
Smith & Mabley was an American veteran era importer of European automobiles and produced the American C. G. V. automobile in 1902, and the S & M Simplex automobile from 1904 to 1907, in New York City.
The Cadillac V8, introduced as the Type 51, is a large, luxurious automobile that was introduced in September 1914 by Cadillac as a 1915 model. It was Cadillac's first V8 automobile, replacing the four-cylinder Model 30, and used the all new GM A platform for the entire series shared with all GM division brands using a 122 in (3,099 mm) wheelbase, while a 145 in (3,683 mm) chassis was offered separately to be used for custom coachwork. The Types 53, 55, 57, 59, and 61 were introduced every year through 1923 with yearly improvements until an all new platform was substantially updated and introduced as the V-63 using the business philosophy called planned obsolescence. It was built at the Cass Street and Amsterdam Avenue factory in Detroit, with the coachwork provided by Fisher Body. The chassis could be purchased separately and sent to the clients choice of coachbuilder optionally.
The Lexington was an automobile manufactured in Connersville, Indiana, from 1910 to 1927. From the beginning, Lexingtons, like most other Indiana-built automobiles, were assembled cars, built with components from many different suppliers. The Thoroughbred Six and Minute Man Six were popular Lexington models.
Barley Motor Car Co. was a manufacturer of luxury automobiles in Kalamazoo, Michigan, and Streator, Illinois. It manufactured the Roamer automobile (1916–29) and briefly, the Barley (1922–24), and the Pennant (1924–25).
Mercer was an American automobile manufacturer from 1909 until 1925. It was notable for its high-performance cars, especially the Type 35 Raceabout.
The Standard was an American automobile manufactured in Butler, Pennsylvania from 1914 until 1923 by the Standard Steel Car Company.
The Cole Motor Car Company was an early automobile maker based in Indianapolis, Indiana. Cole automobiles were built from 1908 until 1925. They were quality-built luxury cars. The make is a pioneer of the V-8 engine.
The Cunningham automobile was a pioneering American production automobile, one of the earliest vehicles in the advent of the automotive age. It was produced from 1896 to 1931 in Rochester, New York by James Cunningham, Son and Company.
The Simplex Automobile Company was formed in 1907 to take over the manufacturer of the S & M Simplex. The Simplex was an American luxury Brass Era automobile manufactured from 1907 to 1918. Headquartered with a manufacturing plant in New York City, manufacturing from 1912 was in New Brunswick, New Jersey. The Simplex Crane Model 5 was commonly called Simplex-Crane and Crane-Simplex. The Crane-Simplex Company of Long Island, New York was an attempt in 1922 to revive the brand but closed after only a few chassis were built.
SGV was a Brass Era American automobile manufacturer that made luxury automobiles using Lancia components, from 1911 to 1916.
Phianna was an American luxury automobile manufactured from 1916 to 1922, first in Newark, New Jersey and then Long Island City, New York.
The Packard Twelve was a range of V12-engined luxury automobiles built by the Packard Motor Car Company in Detroit, Michigan. The car was built from model year 1916 until 1923, then it returned 1933 until 1939. As a sign of changing times, the majority of second generation Packard Twelves received standard bodywork, with custom bodywork gradually losing favor. Many of the custom cars were actually only "semi-customs", with Dietrich assembling Packard-made bodies with special touches. The first generation engine was modified for military use and became the Packard 1A-2500 which began usage in 1924.
George Roy Bentel was an American automobile dealer and the first owner of the Legion Ascot Speedway. Bentel was inducted into the National Sprint Car Hall of Fame in 2010 for his contributions to the sport.
Henry Middlebrook Crane was an American engineer and pioneer in the automobile industry. He was president of Crane Motor Car Company, vice-president and engineer of Simplex Automobile Company, and designed the Pontiac Six motor for General Motors.