This article needs additional citations for verification .(August 2009) |
![]() 1914 Cyclone at The Art of the Motorcycle in Memphis | |
Manufacturer | Joerns Motor Manufacturing Company |
---|---|
Production | 1912–1917 |
Engine | 61 cu in (1,000 cc) 45° SOHC V-Twin |
Power | 45 horsepower (34 kW) |
Cyclone is a motorcycle that was manufactured by Joerns Motor Manufacturing Company located in St. Paul, Minnesota from 1912 through 1917. Later manufacture was moved to Sheboygan, Wisconsin.
The Cyclone was a short-lived brand but made its mark by doing very well on the board track racing circuits of 1910s through the 1920s. Cyclones also did well on the dirt track racing circuit of the day winning many races. In 1914, an Excelsior lost its one-mile speed record title to a Cyclone.
In 2025, a 1915 Cyclone Board Track Racer restored by Stephen Wright was sold for US$1,330,000 at auction. [1] It was the highest price paid for a motorcycle at auction at that time. [1]
Designed by engineer Andrew Strand, a powerful 61 cubic inch (996cc) 45 degree V-Twin SOHC, 45 horsepower engine was the powerplant chosen for the Cyclone. The overhead cams were driven by a vertical shaft via bevel gears and the cylinder head had a hemispherical head combustion chamber. All internal bearings were self-aligning rollers made by SKF, in an era when many motorcycle engines still used plain bushes on shafts. The Cyclone was capable of over 100 mph top speed, although the engine lubrication was crude, and it was fragile over long-distance races of 100 miles or more that were popular on the board tracks of the era. The Cyclone had no positive lubrication of its overhead camshaft, relying on a small metal well of oil to drip into the cambox, which led to overheating of the camshaft and valves in a long race. [2]
Joerns Motor Co. sold the original Cyclone for $350.00. The Cyclone's demise came in 1917, when the Joerns Motor Co. determined that they could not compete with lower cost competition. The design was sold to Ignaz Schwinn of the Excelsior Motor Co., and a few Excelsior SOHC racers based on the Cyclone engine were built, but it was found Excelsior's Big Valve F-head (inlet-over-exhaust) racer could be made faster and more reliable, and the SOHC project was dropped in 1922. [2]
These motorcycles were often painted in Joerns' signature canary-yellow color, however they were also available in dark blue.
A camshaft is a shaft that contains a row of pointed cams in order to convert rotational motion to reciprocating motion. Camshafts are used in piston engines, mechanically controlled ignition systems and early electric motor speed controllers.
In a piston engine, the cylinder head sits above the cylinders, forming the roof of the combustion chamber. In sidevalve engines the head is a simple plate of metal containing the spark plugs and possibly heat dissipation fins. In more modern overhead valve and overhead camshaft engines, the head is a more complicated metal block that also contains the inlet and exhaust passages, and often coolant passages, Valvetrain components, and fuel injectors.
Velocette is a range of motorcycles made by Veloce Ltd, in Hall Green, Birmingham, England. One of several motorcycle manufacturers in Birmingham, Velocette was a small, family-owned firm, selling almost as many hand-built motorcycles during its lifetime as the mass-produced machines of the giant BSA and Norton concerns. Renowned for the quality of its products, the company was "always in the picture" in international motorcycle racing from the mid-1920s until the 1950s, culminating in two World Championship titles and its legendary and still-unbeaten 24 hours at over 100 mph (161 km/h) record. Veloce, while small, was a great technical innovator and many of its patented designs are commonplace on motorcycles today, including the positive-stop foot shift and swinging arm rear suspension with hydraulic dampers. The business suffered a gradual commercial decline during the late 1960s, eventually closing in February 1971.
A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles until 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.
An overhead camshaft (OHC) engine is a piston engine in which the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion chamber in the engine block.
An overhead valve engine, abbreviated (OHV) and sometimes called a pushrod engine, is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with flathead engines, where the valves were located below the combustion chamber in the engine block.
A multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing, and with more smaller valves may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.
Excelsior, based in Coventry, was a British bicycle, motorcycle and car maker. They were Britain’s first motorcycle manufacturer, starting production of their own ‘motor-bicycle’ in 1896. Initially they had premises at Lower Ford Street, Coventry, and 287-295 Stoney Stanton Road, Hillfields, Coventry, Warwickshire before moving to Kings Road, Tyseley, Birmingham in 1921.
The Crocker Motorcycle Company is an American manufacturer, based in Los Angeles, California, founded by Albert Crocker. Located at 1346 Venice Blvd, Crocker produced a series of kits and whole motorcycles between 1931 and 1941: an overhead-valve conversion kit for the Indian 101 Scout motor (1932), a single-cylinder speedway racer (1934), powerful V-twin road motorcycles (1936–40), and the Scootabout (1940–41)motor scooter. Production ceased in 1941.
A tappet or valve lifter is a valve train component which converts rotational motion into linear motion in activating a valve. It is most commonly found in internal combustion engines, where it converts the rotational motion of the camshaft into linear motion of intake and exhaust valves, either directly or indirectly.
The Yamaha SRX is a motorcycle that was manufactured from 1985 to 1997 by the Yamaha Motor Company. Not to be confused with the Yamaha Sidewinder SRX, which is a snowmobile.
A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.
The Ducati singles were single cylinder motorcycles, made by Ducati from 1950 to 1974. Chief Engineer Fabio Taglioni developed a desmodromic valve system in these years, a system that opens and closes the valves using the camshaft, without the need for valve springs. This valve system has become a trademark feature of Ducati motorcycles.
The Manxman was a motorcycle designed and built by H. J. Hatch and Eric Walker of the Excelsior Motor Company in Tyseley, Birmingham. Although it never won the Isle of Man TT, the Manxman was a very popular and reliable motorcycle which was successful in international racing and the Manx Grand Prix. Production was halted by World War II and did not resume.
The Norton International or Cammy Norton is a Norton Motors Ltd overhead cam (OHC) motorcycle built between 1931 and 1957.
Tehuelche was an Argentine motorcycle that was produced between March 1957 and 1964.
Ernest Henry was a mechanical engineer. He developed auto racing engines, and is especially well known for his work for Peugeot and Ballot, who dominated Grand Prix auto racing from 1912 to 1921. His engine design directly influenced Sunbeam Racing cars as early as 1914; the 1921 Grand Prix Sunbeams owe much to his work with Ballot and the 1922 Grand Prix Sunbeams were designed by him.
The Honda CR93 was a twin cylinder 125 cc four stroke racing motorcycle, manufactured during 1962–1963 as a production-volume clubman's racer, and was used in racing for many years.
The Ducati Diana Mark 3, also known as the Ducati Diana SuperSport and commonly referred to as the Ducati Mark 3, is a 249 cc (15.2 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1962 to 1966. It was a higher performance version of the Ducati Diana and sold to the American market only. In 1963, Cycle World described it as "the fastest, and nearly the smoothest, standard motorcycle in the 250cc class". It was replaced in 1967 by the Ducati 250 Mark 3.