Cylindrical coordinate measuring machine

Last updated

This is an example of a Cylindrical Coordinate Measuring Machine (CCMM), a special type of CMM that uses a rotating table to move the part relative to the inspection probe. In this case the CCMM is a camera and telecentric lens system, which is fitted with a tactile probe. Cylindrical Coordinate Measuring Machine CCMM.png
This is an example of a Cylindrical Coordinate Measuring Machine (CCMM), a special type of CMM that uses a rotating table to move the part relative to the inspection probe. In this case the CCMM is a camera and telecentric lens system, which is fitted with a tactile probe.

Cylindrical coordinate measuring machine or CCMM, is a special variation of a standard coordinate measuring machine (CMM) which incorporates a moving table to rotate the part relative to the probe. The probe moves perpendicular to the part axis and radial data is collected at regular angular intervals. [1] [2]

Contents

Description

Where the standard CMM uses a three dimensional Cartesian X, Y, Z system where each axis is orthogonal to the other, a Cylindrical Coordinate Measuring Machine omits the X or Y axis. The probe moves in only two axes (the vertical Z and either X or Y horizontal) and the rotating table positions the subject of inspection (a cylindrical part, hence the word "cylindrical" in the title) in a precise manner. The probe may be tactile in nature, or optical. Optical probing methods include laser interferometry and telecentric lensing.

Coordinate System

The CCMM coordinate system differs from standard cartesian coordinates in that it employs a rotating table. For this reason, a spherical coordinate system is employed to define the axis. A complete definition can be found here: [3] [ circular reference ] The cylindrical coordinate system allows for the construction of crankshaft gages, transmission shaft gages and inspection machines for other shaft applications.

Uses

Where the standard CMM is suitable for prismatic parts, the Cylindrical CMM is ideally suited for cylindrical parts. Examples include camshafts, crankshafts, transmission shafts and other rotating parts with a length longer than their diameter. Parts with a length less than the diameter are typically measured on a roundness gauge.

Technology

The method for recording the angular position of the part will always make use of an optical encoder. However, the radial measurement probe may incorporate an optical technology, or tactile technology. Optical technologies include non-contact laser interferometry or shadow systems, while tactile systems use an optical grating.

Standardization

Standards similar to those used for a standard CMM, also verify the performance of the CCMM. The ISO 10360 series defines the characteristics of the probing system and the length measurement error:

PForm: probing deviation when measuring the form of a sphere
PSize: probing deviation when measuring the size of a sphere
EUni: deviation of measuring length on spheres from one direction
EBi: deviation of measuring length on spheres from left and right

The ISO 10360 series consists of the following parts: [4] [5]

See also

Related Research Articles

<span class="mw-page-title-main">Geodesy</span> Science of measuring the shape, orientation, and gravity of the Earth and other astronomical bodies

Geodesy is the science of measuring and representing the geometry, gravity, and spatial orientation of the Earth in temporally varying 3D. It is called planetary geodesy when studying other astronomical bodies, such as planets or circumplanetary systems.

<span class="mw-page-title-main">Geometric dimensioning and tolerancing</span> System for defining and representing engineering tolerances

Geometric dimensioning and tolerancing (GD&T) is a system for defining and communicating engineering tolerances via a symbolic language on engineering drawings and computer-generated 3D models that describes a physical object's nominal geometry and the permissible variation thereof. GD&T is used to define the nominal geometry of parts and assemblies, the allowable variation in size, form, orientation, and location of individual features, and how features may vary in relation to one another such that a component is considered satisfactory for its intended use. Dimensional specifications define the nominal, as-modeled or as-intended geometry, while tolerance specifications define the allowable physical variation of individual features of a part or assembly.

<span class="mw-page-title-main">Indicator (distance amplifying instrument)</span> Distance amplifying instrument

In various contexts of science, technology, and manufacturing, an indicator is any of various instruments used to accurately measure small distances and angles, and amplify them to make them more obvious. The name comes from the concept of indicating to the user that which their naked eye cannot discern; such as the presence, or exact quantity, of some small distance.

Software quality assurance (SQA) is a means and practice of monitoring all software engineering processes, methods, and work products to ensure compliance against defined standards. It may include ensuring conformance to standards or models, such as ISO/IEC 9126, SPICE or CMMI.

Product and manufacturing information, also abbreviated PMI, conveys non-geometric attributes in 3D computer-aided design (CAD) and Collaborative Product Development systems necessary for manufacturing product components and assemblies. PMI may include geometric dimensions and tolerances, 3D annotation (text) and dimensions, surface finish, and material specifications. PMI is used in conjunction with the 3D model within model-based definition to allow for the elimination of 2D drawings for data set utilization.

<span class="mw-page-title-main">Coordinate-measuring machine</span> Device for measuring the geometry of objects

A coordinate-measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe. Various types of probes are used in CMMs, the most common being mechanical and laser sensors, though optical and white light sensors do exist. Depending on the machine, the probe position may be manually controlled by an operator, or it may be computer controlled. CMMs typically specify a probe's position in terms of its displacement from a reference position in a three-dimensional Cartesian coordinate system. In addition to moving the probe along the X, Y, and Z axes, many machines also allow the probe angle to be controlled to allow measurement of surfaces that would otherwise be unreachable.

<span class="mw-page-title-main">Spatial reference system</span> System to specify locations on Earth

A spatial reference system (SRS) or coordinate reference system (CRS) is a framework used to precisely measure locations on the surface of Earth as coordinates. It is thus the application of the abstract mathematics of coordinate systems and analytic geometry to geographic space. A particular SRS specification comprises a choice of Earth ellipsoid, horizontal datum, map projection, origin point, and unit of measure. Thousands of coordinate systems have been specified for use around the world or in specific regions and for various purposes, necessitating transformations between different SRS.

<span class="mw-page-title-main">Aspheric lens</span> Type of lens

An aspheric lens or asphere is a lens whose surface profiles are not portions of a sphere or cylinder. In photography, a lens assembly that includes an aspheric element is often called an aspherical lens.

Dimensional metrology, also known as industrial metrology, is the application of metrology for quantifying the physical size, form (shape), characteristics, and relational distance from any given feature.

ISO 25178: Geometrical Product Specifications (GPS) – Surface texture: areal is an International Organization for Standardization collection of international standards relating to the analysis of 3D areal surface texture.

Universal measuring machines (UMM) are measurement devices used for objects in which geometric relationships are the most critical element, with dimensions specified from geometric locations rather than absolute coordinates. The very first uses for these machines was the inspection of gauges and parts produced by jig grinding. While bearing some resemblance to a coordinate-measuring machine (CMM), its usage and accuracy envelope differs significantly. While CMMs typically move in three dimensions and measure with a touch probe, a UMM aligns a spindle with a part geometry using a continuous scanning probe.

ISO 1 is an international standard set by the International Organization for Standardization that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20 degrees Celsius (°C), which exactly equals both 293.15 kelvin (K) and 68 degrees Fahrenheit (°F).

In manufacturing and mechanical engineering, flatness is an important geometric condition for workpieces and tools. Flatness is the condition of a surface or derived median plane having all elements in one plane.

Geometrical Product Specification and Verification (GPS&V) is a set of ISO standards developed by ISO Technical Committee 213. The aim of those standards is to develop a common language to specify macro geometry and micro-geometry of products or parts of products so that the language can be used consistently worldwide.

References

  1. Zhang, G. X.; Guo, J. B.; Liu, S. G.; Qiu, Z. R.; Li, X. H. (2010). "The development of cylindrical coordinate measuring machines". Measurement Science and Technology. 21 (5): 054003. Bibcode:2010MeScT..21e4003Z. doi:10.1088/0957-0233/21/5/054003. S2CID   121647001.
  2. "Types". www.aukom.info. Retrieved 2 August 2018.
  3. Cylindrical coordinate system
  4. "ISO 10360-2:2001 - Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size". www.iso.org. Retrieved 2 August 2018.
  5. "ISO 10360-2:2009 - Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions". www.iso.org. Retrieved 2 August 2018.