DKW Typ 4=8

Last updated
DKW 4=8 (1929–1932)
DKW Sonderklasse (1932–1934)
DKW Schwebeklasse (1934–1937)
DKW Sonderklasse (1937–1940)
DKW Schwebeklasse.JPG
DKW Schwebeklasse 1935–1937
Overview
Manufacturer DKW, later part of Auto Union
Also calledDKW 4=8 Typ P 25 PS (1929)
DKW 4=8 Typ V 800 (1930–1931)
DKW Sonderklasse Typ 432 (1932)
DKW Sonderklasse 1001 (1932–1934)
DKW Schwebeklasse (1934–1937)
DKW Sonderklasse (1937–1940)
Production1929–1932
Approx 3,000 units

1932–1934
Approx 7,000 units

1934–1937
Approx 6,000

1937–1940
Approx 8,000
Assembly Zwickau, Germany
Body and chassis
Body style 2 door ”limousine” (saloon)
2 door “cabrio-limousine” (soft top saloon/sedan)
2 door cabriolet
Layout FR layout
Powertrain
Engine 1929
980 cc 4 cylinder 2-stroke

1930–1931
762 cc 4 cylinder 2-stroke

1931–1935
990 cc 4 cylinder 2-stroke


1935–1940
1054 cc 4 cylinder 2-stroke
Transmission 1929–1932
3-speed manual

1932
4-speed manual

1932–1940
4-speed manual with lockable freewheel device
Dimensions
Wheelbase 1929
2,800 mm (110 in)

1930–1932
2,700 mm (110 in)1932
2,760 mm (109 in)

1932–1937
2,850 mm (112 in)

1937–1940
2,600 mm (100 in)
Length1929
3,600 mm (140 in)

1930–1932
3,680 mm (145 in)

1932
4,000 mm (160 in)

1932–1934
4,150 mm (163 in)

1934–1937
4,300 mm (170 in)

1937–1940
4,150 mm (163 in)
Width1929
1,450 mm (57 in)

1930–1932
1,380 mm (54 in)1932
1,400 mm (55 in)

1932–1934
1,500 mm (59 in)

1934–1937
1,590 mm (63 in)

1937–1940
1,600 mm (63 in)
Height1929–1932
1,630 mm (64 in)

1932
1,650 mm (65 in)

1932–1937
1,560 mm (61 in)

1937–1940
1,510 mm (59 in)

The DKW Typ 4=8 is a small rear-wheel drive two-stroke V4 engined car produced at the company's Spandau plant by DKW (later part of the Auto Union). [1] It was launched at the Berlin Motor-show in 1929 as a successor to the DKW Typ P built at the same factory, although the DKW Typ P 4=8 was significantly larger than the Typ P: in terms of market positioning a more direct successor to the DKW Type P was probably the DKW F1 produced in Zwickau from 1931.

Contents

Initially, in 1929, very few Typ 4=8s were produced, but volumes built up as the DKW Typ P and its sporting derivative was phased out, and between 1929 and 1940 approximately 24,000 Typ 4=8s were manufactured. [2] The figure is dwarfed by the approximately 218,000 smaller DKW F1 and its successors produced at Zwickau between 1931 and 1942, and in retrospect the Typ 4=8 tends to be overlooked when compared to its front-wheel drive sibling; but it was nevertheless in the 1930s a significant participant in the growing German auto-market.

The DKW Typ 4=8 underwent several name changes and step by step modifications before production ended, in 1940, of what was by now the 1054 cc DKW Sonderklasse, but the V4 two-stroke engine and market positioning remained consistent throughout.

Names

The name "4=8" was used for several versions of the car between 1929 and 1932 and was based on the way that on a two stroke engine every descent of the piston within the cylinder is driven by an explosion inside the cylinder, whereas in a four stroke engine only one in two of the cylinder's descents within the cylinder is driven by an explosion ( the alternate down strokes involving merely the induction - sucking in - of a combustible mixture of fuel and air). The case made by the name was that accordingly a two-stroke engine worked twice as hard as a four-stroke engine, and the little four-cylinder DKW was comparable, in terms of engine effort, with a four-stroke, eight-cylinder engine.

The name "Sonderklasse" which the car used between 1932 and 1934 does not translate comfortably into English, but the literal translation is "special class." The Sonderklasse name became associated with unfortunate publicity involving car body failures and the car was renamed in 1934, but the Sonderklasse name returned in 1937.

The name "Schwebeklasse" which was used for models produced between 1934 and 1937 apparently referred to the cars "floating" axle, a component of the suspension system which was advertised as providing superior handling. Schweben is a German verb for "to float," or "to hover.")

Evolution

DKW 4=8 Typ P25 (1929)

The car launched in 1929 had a 4-cylinder V4 engine of 980cc mounted at the front and fed by two fuel pumps. Power, maximum output of which was claimed at 25 PS (18 kW), was transmitted to the rear wheels via a 3-speed manual transmission controlled from a lever in the middle of the floor. The wheels were attached to rigid axles each suspended on a traditional transverse leaf spring. [3]

Like its smaller predecessor the car came with a timber frame body coated with synthetic leather. At this stage the only body offered was a two-door four seater limousine sedan/saloon with a perpendicular style characteristic of the period. [4]

DKW 4=8 Typ V 800 (1930–1931)

It had been hoped that the reconfigured fuel feed arrangement and the use of four smaller cylinders in place of two larger ones would address the problem of high fuel consumption and the need for frequent spark-plug replacement which had been a feature of the manufacturer's first car, the predecessor of the Typ 4=8. When it became clear that fuel and spark-plug consumption were still excessive, a replacement model was introduced in 1930, the DKW V 800 4=8. This had a smaller 782 cc engine and only 20 PS of claimed power. [5] The performance of the car was reduced, but not the fuel consumption. The engine tended to overheat, even in cold weather, and could become very jerky in operation. [1]

The car was now offered either as a two-door cabrio-limousine (a soft topped four seater with fixed side windows) or as a full two-seater cabriolet.

DKW 4=8 Typ V 1000 (1931–1932)

In 1931 engine capacity was increased again, now to 990 cc, and claimed power returned to 25 PS. The name changed to DKW 4=8 Typ V 1000. The 990cc engine specification that continued to be included through several successive model upgrades, although changes to compression ratios and the increase in production and sales levels suggest that detailed work continued in order to address the more acute engine problems reported on the early cars. 1931 was also the year that the mechanically operated brake system was replaced by a hydraulically controlled one. [3]

The timber framed body was now available as a four-seater limousine (sedan/saloon), a soft-topped, four-seater cabrio-limousine, or as a full two-seater cabriolet, all three body types supplied with two doors and all three offered at the same manufacturer's published retail price of 3,300 Marks.

DKW Sonderklasse Typ 432 ( 1932)

An interim replacement in 1932 was primarily distinguished by reshaped front wheel arches and slightly more stylish bodywork at the front. The car also acquired a new name and a new gear box. The DKW Sonderklasse Typ 432 was still powered by the now familiar 990cc 2-stroke V4 engine and the gear lever was still in the middle of the floor, but now the driver had a choice from four forward gear ratios rather than three. [3]

The wheel base was also moderately lengthened from 2,700 mm (110 in) to 2,760 mm (109 in). The overall length of this interim 1932 car, which was offered only as a soft-topped four seater cabrio-limousine, increased from 3,680 mm (145 in) to 4,000 mm (160 in), apparently reflecting an increased rear overhang. [4]

DKW Sonderklasse 1001 (1932–1934)

Later in 1932, in October, the car appeared with a further lengthened wheel base and claimed power from the 990 cc engine increased from 25 PS at 3,200 rpm to 26 PS at 3,500 rpm. [6] The name was modified to DKW 1001 Sonderklasse and the rear suspension was redesigned, now featuring a "floating axle" (in German Schwebeachse) suspended from a high level laterally mounted leaf spring.

The wheelbase was again lengthened, this time from 2,760 mm (109 in) to 2,850 mm (112 in), with corresponding increases in overall body length. Once again customers could choose between a four-seater limousine (sedan/saloon), a soft-topped four seater cabrio-limousine or a full (two-seater) cabriolet, all three body types supplied with two doors and all three offered at the same manufacturer's published retail price down to 3,000 Marks, reflecting the currency deflation affecting many European economies in the mid-1930s.

The increased wheelbase enabled the manufacturer to provide more elegant bodies, with longer wings over the wheels and more elegantly raked rears, but the body was found to be less durable than that of the previous model. The traditional timber-frame construction seemed to be reaching the frontiers of its structural possibilities, and the cars tended to flex on bumpy roads or even, in the case of a few older cars, to come apart in the middle. [1]

DKW Schwebeklasse (1934–1935)

1934 saw the arrival of a new model, still powered by the familiar 990cc engine and using the gearbox and underpinnings of the previous model, but the floating axle for the rear wheels was now joined by a second floating axle, suspended from a high level transversely mounted leaf spring, for the front wheels. [6] The new suspension was said to confer superior handling, and DKW celebrated with another name change for the car which now became the DKW Schwebeklasse.

DKW Schwebeklasse (1935–1937)

In July 1935 the engine was bored out slightly further than before. Engine capacity now increased to 1054 cc and claimed power output to 32 PS. This was not a completely new engine, however: the stroke length of 68.5 mm remained unchanged as did the 2-stroke 4-cylinder configuration. The Solex FH 26 S carburettor had been replaced in 1934, during the previous car's production run, with twin Solex 26 BFH carburetters, and this new fuel feed arrangement was retained with the larger engine that arrived in 1935. [6]

The Schwebeklasse came with a strikingly more streamlined silhouette than its predecessor, with longer front and rear overhangs. Timber-frame construction was at this stage retained, but there was no further increase in the wheelbase length, and the body was more rigid than that of the earlier model, though durability remained an issue. [1] The choice of bodies was now between a four-seater limousine (sedan/saloon) and a soft-topped four seater cabrio-limousine: the two-seater cabriolet was no longer offered. [7]

DKW Sonderklasse (1937–1940)

The name DKW Sonderklasse returned in 1937. The engine and suspension were unchanged from those on the previous year's car. Keen-eyed buyers might have spotted the reduction in brake-drum diameters on all four wheels from 250mm to 225mm.

The big news for 1937 was an all new steel body. This put an end to concerns that had arisen since 1932 when the timber frame bodies had gained a reputation for distorting or even snapping as the manufacturer introduced modified bodies with successively lengthened wheel-bases. The new body, which DKW celebrated with a return to the DKW Sonderklasse name, was in fact shared with the Wanderer W24 from DKW's fellow member of the Auto Union. In this form the Sonderklasse continued to be produced in useful volumes and without further significant changes until 1940.

Commercial

During eleven years between 1929 and 1940 DKW produced approximately 24,000 of their small rear wheel drive cars. Approximately 8,000 of these were steel bodied cars produced during the final three years of production.

Related Research Articles

<span class="mw-page-title-main">Audi 80</span> Motor vehicle

The Audi 80 is a compact executive car produced by the Audi subdivision of the Volkswagen Group across four generations from 1966 to 1996. It shared its platform with the Volkswagen Passat from 1973 to 1986 and was available as a saloon, and station wagon — the latter marketed by Audi as the Avant. The coupé and convertible models were not badged as members of the range, but used a derivative of the same platforms.

<span class="mw-page-title-main">Opel Laubfrosch</span> Motor vehicle

The Opel 4 PS, popularly known as the Laubfrosch (treefrog), is a small two-seater car introduced by the auto maker Opel early in 1924. Subsequently, various versions of the little Laubfrosch were produced until it was replaced by the Opel 1.2 litre.

<span class="mw-page-title-main">Adler Diplomat</span> Motor vehicle

The Adler Diplomat is a substantial six-cylinder “limousine” (saloon) built by the Frankfurt auto-maker, Adler. It was introduced in March 1934 as a direct replacement for the manufacturer's Standard 6. Less directly the six-cylinder Diplomat also replaced the Adler Standard 8 since Adler's large eight-cylinder car was discontinued in 1934 without a direct replacement of its own.

<span class="mw-page-title-main">Mercedes-Benz W10</span> Motor vehicle

The Mercedes-Benz Mannheim 350 replaced the W03/Typ 350 models in 1929. The structure originated by Ferdinand Porsche was modified by Hans Nibel.

<span class="mw-page-title-main">DKW Typ P</span> Motor vehicle

The DKW Typ P was the first motor car made by DKW. It was a light-weight design with a unit body made of wood and imitation leather. It was powered by a two stroke inline twin engine.

<span class="mw-page-title-main">Audi Type P</span> Motor vehicle

The Audi Type P was a small two-door sedan/saloon car introduced by Audi in 1931. It was discontinued by 1932.

<span class="mw-page-title-main">DKW F2</span> Motor vehicle

The DKW F2, firstly marketed as "DKW Meisterkasse", is a front wheel drive economy car, produced from 1932 to 1935 at the company’s Zwickau plant. DKW launched the F2 model at the Berlin Motor Show in April 1932. It shared its 584cc engine and drivetrain with its DKW F1 predecessor, but offered a longer wheelbase and a larger body.

<span class="mw-page-title-main">DKW F4</span> Motor vehicle

The DKW F4 Meisterklasse was a small car produced at the company’s Zwickau plant by DKW between 1934 and 1935. It shared its 692cc engine and front wheel drive configuration with its immediate predecessor, the DKW F2 Meisterklasse, along with its 2,610 mm (103 in) wheelbase, but the body had been restyled again, and was now more stylish, the perpendicular rear end of the F2 now replaced with a sloping rear on the mainstream body types

<span class="mw-page-title-main">Adler Trumpf</span> Motor vehicle

The Adler Trumpf is a small family car introduced by the Frankfurt based auto-maker, Adler in March 1932, with Trumpf production fully starting in the late summer that year. In a move reminiscent of British Leyland in the 1970s, Adler launched two similarly sized cars in the same year, one of which followed the 1931 DKW F1's then innovative front-wheel drive layout, and the other model using the conventional rear-wheel drive configuration still used by then market leader, Opel's 1.2 litre 'model 6'.

<span class="mw-page-title-main">Adler Trumpf Junior</span> Motor vehicle

The Adler Trumpf Junior is a small family car introduced by the Frankfurt based auto-maker Adler, early in 1934. The Adler Trumpf had by now been available for two years, and the Trumpf Junior was conceived as a similar but smaller car which would broaden the range and claim a share of a growing market which DKW were creating with their F1 model, and its successors, for small inexpensive front wheel drive cars.

<span class="mw-page-title-main">Opel 1,3 Liter</span> Motor vehicle

The Opel 1,3 Liter is a small car manufactured by Opel. Production commenced in January 1934, although a few pre-production cars had been built during the final part of 1933.

<span class="mw-page-title-main">Opel 2.0 litre</span> Motor vehicle

The Opel 2 Liter, also known as the Opel »6«, is an executive car that was manufactured by Opel. Produced from January 1934, the 2 Liter replaced the Opel 1.8 litre which had ceased production in November 1933. Production continued till June 1937, but the replacement model, the Opel Super 6, was already in production in November 1936, after which production volumes for the 2 Liter were very much diminished.

<span class="mw-page-title-main">Opel 8/40 PS</span> Motor vehicle

The Opel 7/34 PS is a large but relatively inexpensive six-cylinder-powered car manufactured by Opel, introduced in October 1927. It was replaced in 1928 by the Opel 8/40 PS which was virtually identical except that the cylinder capacity had been increased. Significant changes to the chassis took place in February 1929, after which production of the model continued till September 1930. The 8/40 PS was replaced by the Opel 1.8 Liter in 1931, also a compact six-cylinder car.

<span class="mw-page-title-main">Mercedes-Benz W21</span> Motor vehicle

The Mercedes-Benz W 21 was a six-cylinder passenger car launched in 1933 using the name Mercedes-Benz Typ 200. It was one of several Mercedes-Benz models known, in its own time, as the Mercedes-Benz 200 and is therefore in retrospect more commonly referred to using its Mercedes-Benz works number, “W21”.

<span class="mw-page-title-main">Mercedes-Benz W142</span> Motor vehicle

The Mercedes-Benz W 142 was a six-cylinder passenger car launched in February 1937, as a successor to the Mercedes-Benz Typ 290. The car was known by its name Typ 320 at the time of its production and service, but is in retrospect commonly referred to using its Mercedes-Benz works number, "W142", which gives a more unambiguously unique nomenclature.

<span class="mw-page-title-main">Mercedes-Benz W08</span> Motor vehicle

The Mercedes-Benz W08 was a large luxury car produced by Daimler-Benz. It was introduced in Autumn 1928, as Mercedes-Benz's first eight-cylinder passenger car. Also known by various “type numbers”, it remained in production with various modifications and upgrades until the later summer of 1939, the longest lived Mercedes-Benz model of the 1920s and 1930s.

<span class="mw-page-title-main">Mercedes-Benz W18</span> Motor vehicle

The Mercedes-Benz W18 was a six-cylinder automobile introduced as the Mercedes-Benz Typ 290 in 1933. It was a smaller-engined successor to the manufacturer’s Typ 350 / 370 Mannheim model. In terms of the German auto-business of the 1930s it occupied a market position roughly equivalent to that filled by the Mercedes-Benz E-Class in the closing decades of the twentieth century. The W18 was replaced in 1937 by the manufacturer’s W142.

<span class="mw-page-title-main">Mercedes 15/70/100 PS</span> Motor vehicle

The Mercedes 15/70/100 PS was a large automobile introduced by Daimler in 1924. Production continued till 1929 by which time Daimler had merged with Benz & Cie as a result of which the car's name had changed to Mercedes-Benz Typ 400.

<span class="mw-page-title-main">Mercedes 24/100/140 PS</span> Motor vehicle

The Mercedes 24/100/140 PS was a large luxury car introduced by Daimler of Untertürkheim in 1924. Production continued until 1929 by which time Daimler had merged with Benz & Cie and the car's name changed to Mercedes-Benz Typ 630. The car was conceptually and structurally similar to the contemporary Mercedes 15/70/100 PS, but the 24/100/140 PS was longer, heavier, more powerful, faster and more expensive.

<span class="mw-page-title-main">Mercedes-Benz W11</span> Motor vehicle

The Mercedes-Benz W11 was a midsize six-cylinder automobile introduced by Daimler-Benz it 1929. It was developed from the Mercedes-Benz W02 first seen in 1926, and the W11 shared its chassis and bodywork with the W02, but the W11 came with a larger more powerful engine, a new name and a wider list of “standard bodies” from which customers could choose.

References

This entry incorporates information from the German Wikipedia equivalent article.

  1. 1 2 3 4 Oswald, p 87
  2. Oswald, p. 86
  3. 1 2 3 Oswald, p 89
  4. 1 2 Oswald, p 91
  5. Oswald, pp. 87 & 89
  6. 1 2 3 Oswald, p 93
  7. Oswald, pp. 92 & 93