Dannemora mine

Last updated

The open pit around 1780-1800. Pen drawing by Elias Martin Dannemora Elias Martin 1700.jpg
The open pit around 1780–1800. Pen drawing by Elias Martin

The Dannemora mine (Dannemora gruvor) at Dannemora in Uppsala County, Sweden was once one of the most important iron ore mines in Sweden. The mine was closed by its owners SSAB in 1992. It may have been open since the 13th century, but the first documentary reference was in 1481. [1]

Contents

The mine has a depth of 640 metres and supplied oregrounds iron by the Walloon process (Vallonsmide) using a blast furnace and finery forge. Ironworks making sites included Österbybruk and Lövstabruk). Their products were particularly pure iron, due to the manganese content of the iron ore. This made it the best material for conversion to blister steel, the main variety of steel made in Great Britain between the 1610s and the 1850s. [2]

The new pithead gear at Dannemora, built in 1952 The pithead Dannemora mines Sweden.JPG
The new pithead gear at Dannemora, built in 1952
Marten Triewald's engine house Engine house Marten Triewald.JPG
Mårten Triewald's engine house
Site office at Dannemora mines The site office Dannemora mines Sweden.JPG
Site office at Dannemora mines
Dannemora mining area Dannemora mining area.jpg
Dannemora mining area

History

Joachim Piper renewed the mining privileges at Dannemora in 1532 and devoted substantial resources to the mine, mainly producing iron but also other minerals. the ownership structure changed in 1545, and a dozen wealthy individuals entered as the owners, so that a number of Germans and even King Gustav Vasa took part. The Germans were most interested in the export of pig iron but the king persuaded them to start production of wrought iron. It lasted only a few years and following a related bankruptcy, the king took over the operation fully. [1]

Under 17th century, Dannemora iron had an uncontestedly high status among Swedish iron localities, especially in England where it was used in the steel raw material for tools, weapons, springs and other special purposes. A large part went to Sheffield, England. Thus Dannemora contributed to Sheffield's worldwide reputation as a steel city. [1]

Around 1700 there were about sixty workers at Dannemora residents of the neighbourhoods around the mine. The number of workers who obtained their support from the mine is likely to be several hundred. In each mine large quantities of wood would be used, a method not abandoned until the 1730s. The reason for this was partly because gunpowder would be more expensive than wood, but also for danger's sake. [1]

Throughout the mine's history, it had problems with water being situated by a lake. A pile-dam was built during the 17th century, and water- and wind-powered pumps were used. In 1728, at the initiative of Mårten Triewald (1691–1747), a steam-driven pump was installed, a Newcomen atmospheric engine, the first in Sweden, but it was never a success. The failure was probably due to the technology, which worked flawlessly in England, being new to Sweden and was run by inexperienced staff. During blasting to remove two waterfalls in the 1750s, water swept away a blast furnace, a mill and two sawmills. Despite a newly built dam, the mines were flooded in the spring flood of 1795 and it took until 1815 before the situation became normal. In 1805 a new steam engine of 10 horsepower was installed. [3]

During the century 1770–1870, production was between 15,000 and 20,000 tonnes. In the 1870s, it rose to 40,000 tonnes and exports of pig iron from the Österby ironworks became significant. In order to facilitate shipments of ore Dannemora Hargs Railway (Dannemora–Hargs Järnväg) was built between Dannemora mines and Hargshamn in 1878. During the 20th century, production was 50,000 tonnes, but a strike in 1927 stopped operations entirely. Only in 1935 was it resumed. 1955 a new facility, with sorting plant and concentrator was finished and the annual production reached 600,000 tons. During the latter part of the 1970s, output decreased but still amounted to about one million tonnes of crude ore, of which the bulk was exported. [4]

Shareholders of Dannemora mines had declined since the late 19th century through closures and mergers. In 1937 the four remaining owners (Fagersta Bruk, Iggesunds Bruk, Hargs Bruk and Stora Kopparbergs Berglag) formed AB Dannemora Mines. In 1974 Stora Kopparberg became the sole owner of the Dannemora mine. Only four years later, during the crisis that hit the Swedish steel industry in the late 1970s, however, the state-owned SSAB was forced to take over the mine.

Current status

The current owner is Dannemora Mineral AB, which was listed May 25, 2007. The initial stock placement was heavily oversubscribed. In 2008, preparations began to resume mining of iron ore as well as other more precious metals. The mine was emptied of water and a new sorting mill and loading terminal was built. The railroad to the port at Hargshamn was refurbished. An opening ceremony featuring H M King Carl XVI Gustaf was held on 13 June 2012. [5] The company went bankrupt in 2015 due to a decrease in iron price by 70 %. [6]

The main access ramp is being extended down to the 350 m level, and a new ore elevator is being put in. The estimated ore reserves have been revised up to 35 million tonnes, sufficient for at least 14 years production.

Related Research Articles

<span class="mw-page-title-main">Hällefors Municipality</span> Municipality in Örebro County, Sweden

Hällefors Municipality is a municipality in Örebro County in central Sweden. Its seat is located in the town of Hällefors.

<span class="mw-page-title-main">Surahammar Municipality</span> Municipality in Västmanland County, Sweden

Surahammar Municipality is a municipality in Västmanland County in central Sweden. Its seat is located in the town of Surahammar.

<span class="mw-page-title-main">Bergslagen</span>

Bergslagen is a historical, cultural, and linguistic region located north of Lake Mälaren in northern Svealand, Sweden, traditionally known as a mining district. In Bergslagen, the mining and metallurgic industries have been important since the Middle Ages although Malmfälten, the mining district of northernmost Sweden centred at the towns of Kiruna and Malmberget, has been of greater importance during the 20th century.

<span class="mw-page-title-main">Cementation process</span> Obsolete steel-making process

The cementation process is an obsolete technology for making steel by carburization of iron. Unlike modern steelmaking, it increased the amount of carbon in the iron. It was apparently developed before the 17th century. Derwentcote Steel Furnace, built in 1720, is the earliest surviving example of a cementation furnace. Another example in the UK is the cementation furnace in Doncaster Street, Sheffield.

<span class="mw-page-title-main">Fagersta</span> Place in Västmanland, Sweden

Fagersta is a locality and the seat of Fagersta Municipality in Västmanland County, Sweden, with 11,130 inhabitants in 2010.

Luossavaara-Kiirunavaara Aktiebolag (LKAB) is a state owned Swedish mining company. The company mines iron ore at Kiruna and at Malmberget in northern Sweden. The company was established in 1890, and has been 100% state-owned since the 1950s. The iron ore is processed to pellets and sinter fines, which are transported by Iore trains (Malmbanan) to the harbours at Narvik and Luleå and to the steelmill at Luleå (SSAB). Their production is sold throughout much of the world, with the principal markets being European steel mills, as well as North Africa, the Middle East and Southeast Asia. LKAB's mines supply at least 80% of Europe's iron ore.

<span class="mw-page-title-main">Torshälla</span> Place in Södermanland, Sweden

Torshälla is a locality situated in Eskilstuna Municipality, Södermanland County, Sweden with 7,612 inhabitants in 2010. It is mainly known for steel manufacturing, centered on the Nyby Bruk steel mill, and also for its historic old town centre.

<span class="mw-page-title-main">Roslagsbanan</span> Railway line in Sweden

Roslagsbanan is a narrow gauge commuter railway system in Roslagen, Stockholm County, Sweden. Its combined route length is 65 kilometres and there are 38 stations. It is built to the Swedish three foot gauge. The Storstockholms Lokaltrafik (SL) classifies it as "light rail" in its maps.

<span class="mw-page-title-main">Finery forge</span>

A finery forge is a forge used to produce wrought iron from pig iron by decarburization in a process called "fining" which involved liquifying cast iron in a fining hearth and removing carbon from the molten cast iron through oxidation. Finery forges were used as early as the 3rd century BC in China. The finery forge process was replaced by the puddling process and the roller mill, both developed by Henry Cort in 1783–4, but not becoming widespread until after 1800.

Dannemora is an old mining town and a locality situated in Östhammar Municipality, Uppsala County, Sweden. It had 213 inhabitants in 2010.

<span class="mw-page-title-main">Herräng</span> Place in Uppland, Sweden

Herräng is the northernmost locality in Norrtälje Municipality, Stockholm County, Sweden, with 422 inhabitants in 2010. It is located 40 kilometres north of the municipal seat Norrtälje along the coast of Singöfjärden, a bay on Roslagen.

<span class="mw-page-title-main">Oregrounds iron</span>

Oregrounds iron was a grade of iron that was regarded as the best grade available in 18th century England. The term was derived from the small Swedish city of Öregrund, the port from which the bar iron was shipped. It was produced using the Walloon process.

Upsala-Lenna Järnväg (ULJ) is a narrow-gauge heritage railway in Uppsala County, Sweden. It is 33 km (21 mi) long and is a part of the once extensive Roslagen network. The gauge is the 891 mm, unique to Sweden. The railway is run by the SRJmf society.

<span class="mw-page-title-main">Lövstabruk</span> Place in Uppland, Sweden

Lövstabruk is a village on a common in the parish of Österlövsta, Tierp Municipality, Uppsala County, Sweden. In 2010 it had a population of 96, compared to some 1300 at its height during the 18th century. The word lövsta is derived from lösta, an old Swedish word for "glade". The contemporary spelling in the 18th century was Leufsta, with French orthography reflecting the Walloon origin of the workforce. The latter part of the name, bruk, means both "mill town" and "ironworks".

<span class="mw-page-title-main">Falun Mine</span> UNESCO World Heritage Site in Dalarna County, Sweden

Falun Mine was a mine in Falun, Sweden, that operated for a millennium from the 10th century to 1992. It produced as much as two-thirds of Europe's copper needs and helped fund many of Sweden's wars in the 17th century. Technological developments at the mine had a profound influence on mining globally for two centuries. The mine is now a museum and in 2001 was designated a UNESCO World Heritage Site.

<span class="mw-page-title-main">Nyby bruk</span>

Nyby bruk is a steel mill and former mill village, today part of Torshälla in Eskilstuna Municipality, Södermanland County, Sweden.

<span class="mw-page-title-main">Grill family</span> Swedish family

The Grill family are noted for their contribution to the Swedish iron industry and for exports of iron and copper during the 18th century. Starting as silversmiths and experts on noble metals the Grills became engaged in a wide range of businesses. After 1700 the family began its rise to prominence. They owned ironworks, while operating wharves, and importing material related to shipbuilding. The Grills benefited from mercantilist policy. With a positive balance on their account the Grills became engaged in banking, also in the Dutch Republic; around 1720 in the market for government liabilities and then mediating large credits and clearing international bills of exchange. The Grills had significant influence with the Swedish East India Company (SOIC); three members became directors of the SOIC and the Grill firm traded as members of the SOIC and privately.

<span class="mw-page-title-main">Stortyskarna</span>

The passenger train locomotives number 27–29 of Stockholm–Roslagens Järnvägar, usually referred to as stortyskarna, were the largest steam locomotives ever built for the Swedish three foot gauge railways. Initially used in fast passenger trains from Stockholm to Rimbo and Hallstavik, they were moved to freight service after the Stockholm–Rimbo Line was electrified in 1946. They hauled iron ore from Dannemora mine and transporter wagons from Uppsala, but were replaced by diesel locomotives during the 1950s. Two locomotives were leased at different times to the narrow-gauge network in Västergötland. Their last service was between Rimbo and Hallstavik in 1960. SRJ 28 has been preserved.

<span class="mw-page-title-main">Mining in Sweden</span> Mining industry in Sweden

The mining industry in Sweden has a history dating back 6,000 years.

Gysinge is a town in the municipality of Sandviken in the county of Gävleborg, Sweden. There are actually two localities: Gysinge with 123 inhabitants and Gysinge with 174 inhabitants. The history of Gysinge is closely linked with that of the Gysinge forge. It is also the main entry point to Färnebofjärden National Park, established in 1998.

References

  1. 1 2 3 4 "Dannemora gruvor 1481-1992". Kulturbilder. 26 February 2014. Retrieved 1 December 2018.
  2. "Vallonsmide". Nordisk familjebok. Retrieved 1 December 2018.
  3. "Mårten Triewald". Nordisk familjebok. Retrieved 1 December 2018.
  4. Stig Lundin. "Dannemora–Hargs Järnväg (DHJ)". stiglundin.se/jarnvag. Retrieved 1 December 2018.
  5. "Dannemora Gruvor". Dannemora Mineral AB. Retrieved 1 December 2018.
  6. "Dannemora Mineral - Konkursen har bäddat för en spännande framtid" (in Swedish). Retrieved 14 December 2021.

This article is based mainly on the Swedish Wikipedia article, whose sources are given as:

60°12′10″N17°51′45″E / 60.20278°N 17.86250°E / 60.20278; 17.86250