Day-Leeds

Last updated

The Day-Leeds was a British automobile manufactured by Job Day & Sons of Leeds, Yorkshire. [1]

William Henry Day was a chartered accountant who in 1886 set up as a manufacturing chemist. With his brothers Albert and Charles they set up the company of Job Day & Sons making engines designed by William Henry and under Albert packaging machinery. It was named after their father Job Day, a Lincolnshire farmer. [2]

In 1912 they made their first car, a cyclecar powered by an air cooled 998 cc V-twin engine which they built themselves. The tubular steel chassis had half-elliptic springs all round. [3] Drive was to the rear axle through a cone clutch, three speed gearbox with differential and finally a belt or chain to each rear wheel. A top speed of 50 mph (80 km/h) was claimed. [1] The bodywork was open with two seats and acetylene lighting at the front and a single oil light at the rear. The basic car cost £110 or £120 with windscreen, hood, lights and horn. It was no longer being advertised in 1913 so production may have ceased. [2]

As well as cars a range of motor cycles was also offered with a 499cc single cylinder engine. [2]

For 1914 a completely new and more conventional light car was shown at the 1913 London Motor Show with a four-cylinder 1130 cc engine made by Turner but this was soon replaced by a 1286 cc water cooled side valve engine made by themselves. [1] The engine was designed by W L Adams of the Laxtonia Engineering Works of Peterborough who also designed a World War I aero engine. The car had semi elliptic leaf springs, rear wheel only brakes and a wheelbase of 7 feet 9 inches (2,360 mm) and a track of 3 feet 9 inches (1,140 mm). [3] Drive was to the rear axle through a cone clutch, separate three speed gearbox and torque tube.

The model was revived after World War I with electric lighting now fitted. Body types included a two-seat open car and a coupe made by nearby company Lockwood and Clarkson. The price quoted on the UK market in 1919 was £400 for the open two seater and this seems to have been uncompetitive as the price was progressively reduced to £225 when production ceased in 1926. It is thought that around 300 cars were made in the post war period. [4]

Only two cars are thought to survive, one in England and the other in Australia showing that some cars were exported. [2]

Production of packing machinery continued with the company being absorbed by the Baker Perkins company. [1]

Models

ModelYearsCylindersCapacityWheelbaseWeight
8.91912–1913V-twin998 cc5.5 cwt (280 kg)
101914 1919-24four1286 cc7 ft 9in (2362) mm14.5 cwt (710 kg)

Related Research Articles

<span class="mw-page-title-main">Arab (automobile)</span> Motor vehicle

The Arab was a high-performance English automobile designed by Reid Railton and manufactured in Letchworth, Hertfordshire, between 1926 and 1928. The factory had previously been used by the Phoenix car company.

The Ashton-Evans was an English car manufactured in Birmingham from 1919 to 1928 by Joseph Evans & Co of Liverpool Street Mills an engineering company who also made railway locomotives and aircraft parts. In 1919 a new company Ashton-Evans Motors Ltd was formed. The cars were designed by E Bailey who had been with Sunbeam and later J. Bedford.

<span class="mw-page-title-main">Swift Motor Company</span>

The Swift Motor Company made Swift Cars in Coventry, England from 1900 until 1931. It grew progressively from James Starley's Coventry Sewing Machine Company, via bicycle and motorised cycle manufacture. The cars ranged from a single-cylinder car in 1900 using an MMC engine, through a Swift-engined twin-cylinder 7-horsepower light car in 1904, and a 3-litre model in 1913. After the First World War a successful range was sold during the 1920s, but the Cadet of 1930 was its last vehicle as it could not compete economically with volume manufacturers such as Ford and Morris Motors.

<span class="mw-page-title-main">Coventry Premier</span>

Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.

<span class="mw-page-title-main">Dante Giacosa</span> Italian automobile designer

Dante Giacosa was an Italian automobile designer and engineer responsible for a range of Italian automobile designs — and for refining the front-wheel drive layout to an industry-standard configuration. He has been called the deus ex machina of Fiat.

The Rodley was a British microcar designed by Henry Brown and built by the Rodley Automobile Company in Rodley, West Yorkshire between 1954 and 1956. Henry Brown also designed the Scootacar microcar.

The Elfe was a French automobile, manufactured in Lavallois, Paris, from 1919 until about 1925 by Ateliers Defrance Freres. The company was founded by M. Eugene Mauve, who was also the instigator of the Bol d'Or race for cyclecars and latterly motorcycles, now held at the Le Mans circuit in France. During its brief life, the company entered numerous races, under various names including ELFE, Elfe-Anzani, Elfe-DeFrance and Mauve.

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912. A Daimler-Knight sleeve valve engine option was available on the original model in 1911 and 1912.

<span class="mw-page-title-main">Austin 10 hp</span> Motor vehicle

The Austin 10 hp is a high-quality small car produced between 1910 and 1915 by the British car manufacturer Austin Motor Company Limited at their Longbridge, Worcestershire plant near Birmingham. 1,336 cars were made, 213 with the 1125 cc engine and 1,123 with the 1615 cc engine. Like the 1087 cc Austin 7 hp produced by both Austin and Du Cros's Swift Motor Company it was not very successful when sold with the small engine.

<span class="mw-page-title-main">Rolls-Royce 15 hp</span> Motor vehicle

The Rolls-Royce 15 hp was one of four cars to be produced as a result of an agreement of 23 December 1904 between Charles Rolls and Henry Royce. Badged as a Rolls-Royce, the 15 hp was produced by Royce's company, Royce Ltd., at its factory in Cooke Street, Hulme, Manchester. It was sold exclusively by Rolls' motor dealership, C.S.Rolls & Co., at a price of GBP500. The 15 hp was exhibited at the Paris Salon in December 1904, along with the 10 hp, 20 hp and engine for the 30 hp models, but as the new three-cylinder engine was not ready the chassis was incomplete.

<span class="mw-page-title-main">Rover 12</span> Name given to several medium-sized family cars from the British Rover car company

The Rover 12 was a name given to several medium-sized family cars from the British Rover car company between 1905 and 1948.

The Palmerston was a British car made by the Palmerston Motor Company based in Bournemouth, England between 1920 and 1923.

<span class="mw-page-title-main">Vauxhall 30-98</span> Motor vehicle

The Vauxhall 30–98 is a car manufactured by Vauxhall at Luton, Bedfordshire from 1913 to 1927. In its day, its best-known configuration was the Vauxhall Velox standard 4-seater with open tourer body. Vauxhall's own description was the 30–98 hp Vauxhall-Velox sporting car. The 30–98 is also known to enthusiasts by Vauxhall's chassis code E.

<span class="mw-page-title-main">Auburn Speedster</span> American automobile model (1925–1937)

The Auburn Speedster was an American car, manufactured by the Auburn Automobile Company of Auburn, Indiana and manufactured in Union City, Indiana. A total of 887 cars were manufactured between 1928 and 1936, across 3 series. The first two series were designed by stylist Alan Leamy. The Auburn 851 Speedster of 1935 was styled by designer Gordon Buehrig, who also was responsible for the Cord Model 810. Al Jenkins broke 70 America speed records in the 1935 car.

<span class="mw-page-title-main">Austin 15 hp</span> Motor vehicle

The Austin 15 hp is a 2.8-litre motor car manufactured by the British manufacturer Austin and first displayed at the seventh exhibition of motor vehicles which opened at London's Olympia in November 1908. Its tax rating was 20 horsepower. It was sold between 1908 and 1915.

<span class="mw-page-title-main">Little Midland</span> Motor vehicle

The Little Midland or LM was a British 4-wheeled cyclecar made from 1910 to 1922 by the Little Midland Light Car Co Ltd in various places in Lancashire.

<span class="mw-page-title-main">Wilson-Pilcher</span> English car company

Wilson-Pilcher was an English car company founded in 1901 and acquired by Sir WG Taken Armstrong Whitworth & Co., Limited in 1904.

<span class="mw-page-title-main">Morris Oxford bullnose</span> Motor vehicle

The "bullnose" Morris Oxford is a series of motor car models produced by British manufacturer Morris from 1913 to 1926. It was named by W R Morris after the city in which he grew up and which his cars were to industrialise.

<span class="mw-page-title-main">Alvis 10/30</span> Motor vehicle

The Alvis 10/30 is a car introduced by British car maker Alvis Car and Engineering Company Ltd in 1920. It was the company's first production vehicle and was made until 1923. A range of body styles was available.

<span class="mw-page-title-main">Cluley</span>

The Cluley was a British automobile manufactured between 1921 and 1928 by Clarke, Cluley & Co based in Coventry.

References

  1. 1 2 3 4 Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN   1-57958-293-1.
  2. 1 2 3 4 Worthington-Williams, Michael (March 1995). "The Day-Leeds Story". The Automobile. 13: 42–46.
  3. 1 2 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN   0-333-16689-2.
  4. Baldwin, N. (1994). A-Z of Cars of the 1920s. Devon, UK: Bay View Books. ISBN   1-870979-53-2.