Dickey E-Racer

Last updated

E-Racer
E-Racer.jpg
Modified E-Racer
Role Homebuilt aircraft
National origin United States
Manufacturer Shirl Dickey Enterprises
DesignerShirl Dickey
First flight1984
StatusProduction completed
Number builtat least 15
Developed from Rutan Long-EZ

The Dickey E-Racer, also called the Sierra Delta E-Racer, is an American homebuilt aircraft that was designed by Shirl Dickey and produced by Shirl Dickey Enterprises of Phoenix, Arizona. It was first flown in 1984. When it was available the aircraft was supplied in the form of plans for amateur construction, with some parts available to facilitate faster construction. [1] [2]

Contents

Design and development

The aircraft is based upon the Rutan Long-EZ. It features a cantilever mid-wing canard layout with tip rudders, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fully retractable tricycle landing gear and a single engine in pusher configuration. [1]

The aircraft is made from E-glass. Its 26.2 ft (8.0 m) span wing has a wing area of 94.00 sq ft (8.733 m2) and employs a Roncz R1145MS airfoil for the canard airfoil, and the main wing uses a modified Eppler 1230 airfoil. The standard engine used in the Mark 1 is the 240 hp (179 kW) Buick V-8 automotive conversion powerplant. [1] [3]

The aircraft has a typical empty weight of 1,000 lb (450 kg) and a gross weight of 1,800 lb (820 kg), giving a useful load of 700 lb (320 kg). With full fuel of 46 U.S. gallons (170 L; 38 imp gal) the payload for pilot, passenger and baggage is 424 lb (192 kg). [1]

Like most canard designs the E-Racer has a long take-off and landing roll. The standard day, sea level take-off roll is 1,200 ft (366 m). The landing roll is 1,500 ft (457 m). [1] [2]

At one time pre-fabricated wings and canard were available to speed construction. The manufacturer estimates the construction time from the supplied plans as 2000 hours. [1] [2]

Operational history

By 1998 the company reported that four aircraft were flying and six by 1999. [1] [2]

In December 2013, 15 examples were registered in the United States with the Federal Aviation Administration. [4]

Variants

E-Racer Mark 1
Initial version powered by a 240 hp (179 kW) Buick V-8 automotive conversion powerplant [1]
E-Racer Mark 2
Later version powered by aircraft engine powerplants [1] [2]
King Racer
Later version with a larger cockpit [2]

Specifications (E-Racer Mark 1)

Data from AeroCrafter, The Incomplete Guide to Airfoil Usage and KitPlanes [1] [2] [3]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Rutan Long-EZ</span> Homebuilt aircraft with canard layout

The Rutan Model 61 Long-EZ is a tandem 2-seater homebuilt aircraft designed by Burt Rutan's Rutan Aircraft Factory. The Long-EZ has a canard layout, a swept wing with wingtip rudders, and a pusher engine and propeller. The tricycle landing gear has fixed main wheels with streamlined spats and a retractable nosewheel. Its predecessor was the VariEze, plans for which were first available to homebuilders in 1976. The prototype Long-EZ, N79RA, first flew on June 12, 1979.

<span class="mw-page-title-main">Berkut 360</span> Type of aircraft

The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.

<span class="mw-page-title-main">Bradley Aerobat</span> American homebuilt aircraft

The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Rutan Solitaire</span> American motorglider

The Rutan Model 77 Solitaire is an American, single seat, canard, mid-wing motor glider that was developed by Burt Rutan in response to the 1982 Sailplane Homebuilders Association Design Contest for a homebuilt glider. It first flew in 1982. The Solitaire was declared the winner of the contest and its unusual layout attracted a great deal of attention. For a time in the 1980s the aircraft was available as plans and as a kit.

<span class="mw-page-title-main">Hummel H5</span> American homebuilt aircraft

The Hummel H5 is an American amateur-built aircraft, designed by Morry Hummel and produced by Hummel Aviation. The aircraft is supplied as a kit or plans for amateur construction.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The Bagalini Baganfibio is an Italian homebuilt flying boat that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The CEI Free Spirit Mk II, also called the Cabrinha Free Spirit Mark II and the Cabrinha Model 423, is a three-seat American homebuilt aircraft that was designed by Richard Cabrinha and produced by CEI of Auburn, California, introduced at AirVenture in 1995. The aircraft was intended to be supplied as a kit for amateur construction, but only prototypes seem to have been completed.

<span class="mw-page-title-main">Collins Dipper</span> American homebuilt aircraft

The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.

<span class="mw-page-title-main">Historical P-51 Mustang</span> American homebuilt fighter replica

The Historical P-51 Mustang is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original North American P-51 Mustang and when it was available was supplied as a kit for amateur construction.

The Historical P-40C Tomahawk is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original Curtiss P-40C Tomahawk and when it was available was supplied as a kit for amateur construction.

The Javelin V6 STOL is an American STOL homebuilt aircraft that was designed and produced by Javelin Aircraft of Wichita, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction.

The Sport Racer is an American homebuilt racing aircraft that was designed and produced by Sport Racer Inc of Valley Center, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction.

<span class="mw-page-title-main">Stolp SA-900 V-Star</span> American light aircraft

The Stolp SA-900 V-Star is an American aerobatic homebuilt biplane, currently produced by Aircraft Spruce & Specialty Co in the form of plans for amateur construction. In the 1990s it was also available as a kit from Stolp Starduster Corporation of Riverside, California.

The Time Warp Spitfire Mk V is an American homebuilt aircraft that was designed and produced by Time Warp Aircraft of Lakeland, Florida, introduced in 1996 at Sun 'n Fun. When it was available the aircraft was supplied as a kit for amateur construction.

The Coelho AC-11 is a Brazilian homebuilt aircraft that was designed and produced by Altair Coelho of Eldorado do Sul and introduced in 1994. The aircraft was intended to be supplied as a kit for amateur construction, but only one was completed.

The Bradley BA-200 ATAC was an American homebuilt aircraft that was designed by Bradley Aerospace of Chico, California, introduced in the mid-1990s. The aircraft was intended to be supplied as a kit for amateur construction, but is likely that only one was constructed.

The Parrish Dart is an American canard-configuration homebuilt aircraft that was designed by Jimmy R. Parrish and produced by Parrish Aircraft Xperimental, Inc. of Plantation, Florida. It first flew in the Autumn of 1995. When it was available the aircraft was supplied in the form of plans for amateur construction.

<span class="mw-page-title-main">Performance Aircraft Formula GT</span> American homebuilt airplane

The Performance Aircraft Formula GT is an American homebuilt aircraft that was designed and produced by Performance Aircraft of Olathe, Kansas, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Specter Aircraft Specter II</span> American homebuilt aircraft

The Specter Aircraft Specter II was an American homebuilt aircraft that was designed and produced by Specter Aircraft of Bancroft, Idaho, introduced in 1997. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 8 9 10 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 146. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. 1 2 3 4 5 6 7 Downey, Julia: 1999 Plans Aircraft Directory, Kitplanes, Volume 16, Number 1, January 1999, page 57. Primedia Publications. ISSN 0891-1851
  3. 1 2 Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on July 19, 2011. Retrieved December 25, 2013.
  4. ↑ Federal Aviation Administration (December 23, 2013). "Make / Model Inquiry Results" . Retrieved December 23, 2013.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.