Diisopropylbenzene

Last updated

The diisopropylbenzenes(DIPB) are organic compounds with the formula C6H4(CH(CH3)2)2. Three isomers exist: 1,2- 1,3-, and 1,4-diisopropylbenzene. All are colorless liquids, immiscible in water, with similar boiling points. They are classified are aromatic hydrocarbons bearing a pair of isopropyl (CH(CH3)2) substituents. [1] DIPB has been referred to as "a common diluent" alongside hexane. [2]

Contents

Diisopropylbenzenes
Systematic name1,2-Diisopropylbenzene 1,3-Diisopropylbenzene 1,4-Diisopropylbenzene
Common nameo-Diisopropylbenzenem-Diisopropylbenzenep-Diisopropylbenzene
Chemical structure 1,2-Diisopropylbenzene.svg 1,3-Diisopropylbenzene.svg 1,4-Diisopropylbenzene.svg
CAS Number 577-55-999-62-7100-18-5
PubChem CID 11345 from PubChem CID 7450 from PubChem CID 7486 from PubChem
Chemical formula C12H18
Molar mass 162.28 g/mol
State of matter Liquid
Melting point [3] −57 °C−63 °C−17 °C
Boiling point [3] 205 °C203 °C210 °C
Solubility Very slightly soluble in water [4] 0.072 mg·l−1 in water (25 °C) [5] Practically insoluble in water [6]

Production and reactions

Diisopropylbenzenes typically arise by alkylation of benzene or isopropylbenzene with propylene:

C6H6 + CH3CH=CH2 → C6H5CH(CH3)2
C6H5CH(CH3)2 + CH3CH=CH2 → C6H4(CH(CH3)2)2

These alkylations are catalyzed by various Lewis acids, such as aluminium trichloride.

They can also be prepared and transformed by transalkylation reactions. In this way, triisopropylbenzenes are converted back to diisopropylbenzenes upon treatment with benzene or monoisopropylbenzene. As usual, these transformations are catalyzed by Lewis acids. [3]

C6H4(CH(CH3)2)2 + C6H6 → 2 C6H5CH(CH3)2

The 1,3- and 1,4- isomers are mainly of interest as precursors to the respective dihydroxylbenzene derivatives, which exploits the Hock rearrangements. All three isomers form hydroperoxides, as is implicit in the Hock rearrangement, which are of interest as radical initiators for polymerization. [7]

See also

Related Research Articles

<span class="mw-page-title-main">Tetrahydrofuran</span> Cyclic chemical compound, (CH₂)₄O

Tetrahydrofuran (THF), or oxolane, is an organic compound with the formula (CH2)4O. The compound is classified as heterocyclic compound, specifically a cyclic ether. It is a colorless, water-miscible organic liquid with low viscosity. It is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. It is an isomer of another solvent, butanone.

<span class="mw-page-title-main">1,4-Dichlorobenzene</span> Chemical compound

1,4-Dichlorobenzene (1,4-DCB, p-DCB, or para-dichlorobenzene, sometimes abbreviated as PDCB or para) is an aryl chloride and isomer of dichlorobenzene with the formula C6H4Cl2. This colorless solid has a strong odor. The molecule consists of a benzene ring with two chlorine atoms (replacing hydrogen atoms) on opposing sites of the ring.

<span class="mw-page-title-main">Cumene process</span> Industrial process

The cumene process is an industrial process for synthesizing phenol and acetone from benzene and propylene. The term stems from cumene, the intermediate material during the process. It was invented by R. Ūdris and P. Sergeyev in 1942 (USSR), and independently by Heinrich Hock in 1944.

<span class="mw-page-title-main">Dicarbonyl</span> Molecule containing two adjacent C=O groups

In organic chemistry, a dicarbonyl is a molecule containing two carbonyl groups. Although this term could refer to any organic compound containing two carbonyl groups, it is used more specifically to describe molecules in which both carbonyls are in close enough proximity that their reactivity is changed, such as 1,2-, 1,3-, and 1,4-dicarbonyls. Their properties often differ from those of monocarbonyls, and so they are usually considered functional groups of their own. These compounds can have symmetrical or unsymmetrical substituents on each carbonyl, and may also be functionally symmetrical or unsymmetrical.

Cyclohexene is a hydrocarbon with the formula (CH2)4C2H2. It is an example of a cycloalkene. At room temperature, cyclohexene is a colorless liquid with a sharp odor. Among its uses, it is an intermediate in the commercial synthesis of nylon.

<span class="mw-page-title-main">Isobutylene</span> Unsaturated hydrocarbon compound (H2C=C(CH3)2)

Isobutylene is a hydrocarbon with the chemical formula (CH3)2C=CH2. It is a four-carbon branched alkene (olefin), one of the four isomers of butylene. It is a colorless flammable gas, and is of considerable industrial value.

<span class="mw-page-title-main">Ethylbenzene</span> Hydrocarbon compound; precursor to styrene and polystyrene

Ethylbenzene is an organic compound with the formula C6H5CH2CH3. It is a highly flammable, colorless liquid with an odor similar to that of gasoline. This monocyclic aromatic hydrocarbon is important in the petrochemical industry as a reaction intermediate in the production of styrene, the precursor to polystyrene, a common plastic material. In 2012, more than 99% of ethylbenzene produced was consumed in the production of styrene.

Dodecanol, or lauryl alcohol, is an organic compound produced industrially from palm kernel oil or coconut oil. It is a fatty alcohol. Sulfate esters of lauryl alcohol, especially sodium lauryl sulfate, are very widely used as surfactants. Sodium lauryl sulfate and the related dodecanol derivatives ammonium lauryl sulfate and sodium laureth sulfate are all used in shampoos. Dodecanol is tasteless, colorless, and has a floral odor.

<span class="mw-page-title-main">Butyraldehyde</span> Chemical compound

Butyraldehyde, also known as butanal, is an organic compound with the formula CH3(CH2)2CHO. This compound is the aldehyde derivative of butane. It is a colorless flammable liquid with an unpleasant smell. It is miscible with most organic solvents.

<span class="mw-page-title-main">Vinylacetylene</span> Chemical compound

Vinylacetylene is the organic compound with the formula C4H4. The colourless gas was once used in the polymer industry. It is composed of both alkyne and alkene groups and is the simplest enyne.

<span class="mw-page-title-main">1-Nonanol</span> Chemical compound

1-Nonanol is a straight chain fatty alcohol with nine carbon atoms and the molecular formula CH3(CH2)8OH. It is a colorless oily liquid with a citrus odor similar to citronella oil.

<span class="mw-page-title-main">Divinylbenzene</span> Organic compound, C₆H₄(CH=CH₂)₂

Divinylbenzene (DVB) is an organic compound with the chemical formula C6H4(CH=CH2)2 and structure H2C=CH−C6H4−HC=CH2. It is related to styrene by the addition of a second vinyl group. It is a colorless liquid manufactured by the thermal dehydrogenation of isomeric diethylbenzenes. Under synthesis conditions, o-divinylbenzene converts to naphthalene and thus is not a component of the usual mixtures of DVB.

<span class="mw-page-title-main">Tolidine</span> Chemical compound

2-Tolidine (orthotolidine, o-tolidine; not to be confused with o-toluidine) is an organic compound with the chemical formula (C6H4(CH3)NH2)2. Several isomers are known; the 3-tolidine derivative is also important commercially. It is a colorless compound although commercial samples are often colored. It is slightly soluble in water. It forms salts with acids, such as the hydrochloride, which is commercially available.

In organic chemistry, transalkylation is a chemical reaction involving the transfer of an alkyl group from one organic compound to another. The reaction is used for the transfer of methyl and ethyl groups between benzene rings. This is of particular value in the petrochemical industry to manufacture p-xylene, styrene, and other aromatic compounds. Motivation for using transalkylation reactions is based on a difference in production and demand for benzene, toluene, and xylenes. Transalkylation can convert toluene, which is overproduced, into benzene and xylene, which are under-produced. Zeolites are often used as catalysts in transalkylation reactions.

<span class="mw-page-title-main">1-Octanol</span> Chemical compound

1-Octanol, also known as octan-1-ol, is the organic compound with the molecular formula CH3(CH2)7OH. It is a fatty alcohol. Many other isomers are also known generically as octanols. 1-Octanol is manufactured for the synthesis of esters for use in perfumes and flavorings. It has a pungent odor. Esters of octanol, such as octyl acetate, occur as components of essential oils. It is used to evaluate the lipophilicity of pharmaceutical products.

Cymene describes organic compounds with the formula CH3C6H4CH(CH3)2. Three isomers exist: 1,2- 1,3-, and 1,4-. All are colorless liquids, immiscible in water, with similar boiling points. They are classified are aromatic hydrocarbons. The bearing two substituents: an isopropyl group and a methyl group.

<span class="mw-page-title-main">Diethylbenzenes</span> Chemical compound

Diethylbenzene (DEB) refers to any of three isomers with the formula C6H4(C2H5)2. Each consists of a benzene ring and two ethyl substituents. The meta and para have the greater commercial significance. All are colorless liquids.

Ethyltolune describes organic compounds with the formula CH3C6H4CH2CH3. Three isomers exist: 1,2- 1,3-, and 1,4-. All are colorless liquids, immiscible in water, with similar boiling points. They are classified are aromatic hydrocarbons. The ring bears two substituents: a methyl group and an ethyl group.

Bis(2-ethylhexyl) maleate is the chemical compound with the structural formula (H3C 3−CH −CH2−O−C −CH=)2, where the two carboxylate groups are mutually cis. It can be described as the double ester of maleic acid with the alcohol 2-ethylhexanol. It is commonly called dioctyl maleate (DOM), reflecting the older usage of "octane" to refer to any 8-carbon alkane, straight-chained or branched.

1,3-Diisopropylbenzene is an aromatic hydrocarbon with the formula C6H4(CHMe2)2 (Me = CH3). It is one of three isomeric diisopropylbenzenes. This colorless liquid is prepared by thermal isomerization of 1,4-diisopropylbenzene over a solid acid catalyst. It is the principal industrial precursor to resorcinol via the Hock rearrangement.

References

  1. ↑ Vora BV, Kocal JA, Barger PT, Schmidt RJ, Johnson JA (2003). "Alkylation". Kirk-Othmer Encyclopedia of Chemical Technology. Vol. 2. John Wiley & Sons. doi:10.1002/0471238961.0112112508011313.a01.pub2. ISBN   9780471238966.
  2. ↑ Wang LY, Guo QJ, Lee MS (9 August 2018). "Recent advances in metal extraction improvement: Mixture systems consisting of ionic liquid and molecular extractant". Separation and Purification Technology (Review article). 210: 292–303. doi:10.1016/j.seppur.2018.08.016. S2CID   105020998.
  3. 1 2 3 Schmidt, Roland; Griesbaum, Karl; Behr, Arno; Biedenkapp, Dieter; Voges, Heinz-Werner; Garbe, Dorothea; Paetz, Christian; Collin, Gerd; Mayer, Dieter; Höke, Hartmut (2014). "Hydrocarbons". Ullmann's Encyclopedia of Industrial Chemistry. pp. 1–74. doi:10.1002/14356007.a13_227.pub3. ISBN   9783527306732.
  4. ↑ Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  5. ↑ Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  6. ↑ Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  7. ↑ Schmiedel, Klaus W.; Decker, Daniel (2011). "Resorcinol". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a23_111.pub2. ISBN   9783527303854.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.