Dunbrody (2001)

Last updated

Dunbrody ship NewRoss.jpg
Dunbrody at New Ross
History
Flag of Ireland.svg
NameDunbrody
BuilderJ F Kennedy Trust
Launched11 February 2001
General characteristics
Displacement458 tonnes (451 long tons)
Length
  • 53.7 m (176 ft 2 in) o/a
  • 36.6 m (120 ft 1 in) w/l
Beam8.5 m (27 ft 11 in)
Draft3.5 m (11 ft 6 in)
Sail plan Barque, sail area 940 m2 (10,100 sq ft)

The Dunbrody is a three-masted barque built in New Ross between 1997 and 2001 by the J F Kennedy Trust . The build team involved participants of FAS community and unemployment schemes working with a core group of experienced shipwrights . The Trust refurbished a derelict dry dock for the build


Due to a funding pause the final fit-out including production of the standing and running rigging deckhouse, interior, electrics and plumbing was done by the German company navcon.naval consulting GmbH. The ship was converted to a Lloyd's Register approved passenger sailing vessel in 2006 by the German company Neptun Peenemuende GmbH. For this two main engines, a bowthruster, watertight bulkheads and a modern navigation system were added. The ship sailed to England twice in the following years.

The Dunbrody is a full-scale seagoing replica of the Dunbrody, launched in 1845 and wrecked in 1875.

Since May 2001 the replica Dunbrody has been open to visitors at the quayside in New Ross. Visitors can see an interactive exhibition and experience life on board an emigrant ship. There is also a large database, compiled in collaboration with the Balch Institute, of emigrants who sailed from England, Ireland, Scotland & Wales in the 19th century.

The hull was built with wood planking on wooden frames. The main deck was built from wooden planking on wooden deck beams. The rigging was done in 2001 with wooden masts, topmasts and spars with steel fittings. In 2006 the lower masts were changed to steel masts, but the Topmasts and spars remained the same.

In 2010 the engines and electronics were dismounted and the ship is now permanently moored alongside in New Ross.

See also

Coordinates: 52°23′38″N6°56′53″W / 52.393841°N 6.947947°W / 52.393841; -6.947947


Related Research Articles

<span class="mw-page-title-main">Rigging</span> Ropes, cables and chains which support masts of sailing ships

Rigging comprises the system of ropes, cables and chains, which support a sailing ship or sail boat's masts—standing rigging, including shrouds and stays—and which adjust the position of the vessel's sails and spars to which they are attached—the running rigging, including halyards, braces, sheets and vangs.

<span class="mw-page-title-main">Sailing ship</span> Large wind-powered water vessel

A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships carry square sails on each mast—the brig and full-rigged ship, said to be "ship-rigged" when there are three or more masts. Others carry only fore-and-aft sails on each mast, for instance some schooners. Still others employ a combination of square and fore-and-aft sails, including the barque, barquentine, and brigantine.

<span class="mw-page-title-main">Sailing rigs</span> Description of the specific ways that a sailing craft is rigged

Sailing rigs describe the arrangement of sailing vessels' rig components, including their spars, rigging, and sails. Examples include a schooner rig, cutter rig, junk rig, etc. Rigs may be broadly categorized as fore-and-aft and square-rigged. They may incorporate a mixture of both categories. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

<span class="mw-page-title-main">Boat building</span> Design and construction of floating vessels

Boat building is the design and construction of boats and their systems. This includes at a minimum a hull, with propulsion, mechanical, navigation, safety and other systems as a craft requires.

<span class="mw-page-title-main">Mast (sailing)</span> Pole used in rigging of a sailing vessel

The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat. Its purposes include carrying sails, spars, and derricks, giving necessary height to a navigation light, look-out position, signal yard, control position, radio aerial or signal lamp. Large ships have several masts, with the size and configuration depending on the style of ship. Nearly all sailing masts are guyed.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<i>Étoile du Roy</i>

Étoile du Roy, formerly Grand Turk, is a three-masted sixth-rate frigate, designed to represent a generic warship during the Age of Sail, with her design greatly inspired by HMS Blandford. The ship was built in Marmaris, Turkey, in 1996 to provide a replica of a frigate for the production of the ITV series adapted from the novels about Royal Navy officer Horatio Hornblower by C. S. Forester. Nowadays the tall ship is used mainly in sailing events, for corporate or private charter, and for receptions in her spacious saloon or on her deck. In 2010 the French company Étoile Marine Croisières, based at Saint-Malo, Brittany, purchased the ship and renamed her Étoile du Roy.

<span class="mw-page-title-main">Topmast</span> Section of mast on sailing ship

The masts of traditional sailing ships were not single spars, but were constructed of separate sections or masts, each with its own rigging. The topmast is one of these.

<span class="mw-page-title-main">Spritsail</span>

The spritsail is a four-sided, fore-and-aft sail that is supported at its highest points by the mast and a diagonally running spar known as the sprit. The foot of the sail can be stretched by a boom or held loose-footed just by its sheets. A spritsail has four corners: the throat, peak, clew, and tack. The Spritsail can also be used to describe a rig that uses a spritsail.

<span class="mw-page-title-main">Jackass-barque</span>

A jackass-barque, sometimes spelled jackass bark, is a sailing ship with three masts, of which the foremast is square-rigged and the main is partially square-rigged and partially fore-and-aft rigged (course). The mizzen mast is fore-and-aft rigged.

<i>Thomas W. Lawson</i> (ship) American coal and oil transport ship (1902-07)

Thomas W. Lawson was a seven-masted, steel-hulled schooner built for the Pacific trade, but used primarily to haul coal and oil along the East Coast of the United States. Named for copper baron Thomas W. Lawson, a Boston millionaire, stock-broker, book author, and president of the Boston Bay State Gas Co., she was launched in 1902 as the largest schooner and largest sailing vessel without an auxiliary engine ever built.

<i>Jeanie Johnston</i>

Jeanie Johnston is a replica of a three masted barque that was originally built in Quebec, Canada, in 1847 by the Scottish-born shipbuilder John Munn. The replica Jeanie Johnston performs a number of functions: an ocean-going sail training vessel at sea and in port converts into a living history museum on 19th century emigration and, in the evenings, is used as a corporate event venue.

Sailing Ship <i>Columbia</i> Replica ship attraction at Disneyland

The Sailing Ship Columbia, located at the Disneyland park in Anaheim, California, is a full-scale replica of Columbia Rediviva, the first American ship to circumnavigate the globe. The Columbia has operated in the park for more than fifty years. Passengers of the ship take a 12-minute trip around the Rivers of America. At night, the Columbia plays the role of a pirate ship in riverfront performances of the park's nighttime show, Fantasmic!

<i>Shenandoah</i> (schooner)

The Shenandoah is a 108-foot (33 m) topsail schooner built in Maine in 1964, and operates as a cruise ship and educational vessel in the waters of Vineyard Haven Harbor, Martha's Vineyard, Massachusetts. She is claimed to be the only schooner of her size and topsail rig without an engine in the world.

<i>R. Tucker Thompson</i>

R. Tucker Thompson is a gaff-rigged topsail schooner based in Opua, Bay of Islands, New Zealand. She is operated as a non-for profit charitable trust and owned by the R. Tucker Thompson Sail Training Trust. The mission of the trust is “Learning for Life through the Sea”. The ship is used for tourism day sails in the Bay of Islands from October through April and for sail training activities between May and September. Youth sail training is particularly focused at youth from the Tai Tokerau Northland region of New Zealand. She is a member of the Australian Sail Training Association (AUSTA), and participated in the American Sail Training Association (ASTA) West Coast Tall Ships Challenge events in 2002 and 2005.

<span class="mw-page-title-main">Pinisi</span> Type of rigging of Indonesian sailing vessels

Literally, the word pinisi refers to a type of rigging of Indonesian sailing vessels. A pinisi carries seven to eight sails on two masts, arranged like a gaff-ketch with what is called 'standing gaffs' — i.e., unlike most Western ships using such a rig, the two main sails are not opened by raising the spars they are attached to, but the sails are 'pulled out' like curtains along the gaffs which are fixed at around the centre of the masts.

<span class="mw-page-title-main">Humber keel</span>

The Humber keel was a type of single-masted, square-rigged sailing craft used for inshore and inland cargo transport around Hull and the Humber Estuary, in the United Kingdom, particularly through the late 19th and early 20th centuries.

The Dunbrody was a three-masted barque built in Quebec in 1845 by Thomas Hamilton Oliver for the Graves family, merchants from New Ross in Wexford.

Kathleen and May British ship

Kathleen and May is the last remaining British built wooden hull three masted top sail schooner. Registered in Bideford, North Devon, but presently based in Liverpool, she is listed as part of the National Historic Fleet.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".