Founded by David Hafler and Ed Laurent in Philadelphia, Pennsylvania in 1955, Dynaco was an American hi-fi audio system manufacturer popular in the 1960s and 1970s for its wide range of affordable, yet high quality audio components..[1] Its best known product was the ST-70 tube stereo amplifier. They also manufactured other tube and solid state amplifiers, preamplifiers, radio tuners and bookshelf loudspeakers. Dynaco was liquidated in 1980, and the trademark is now owned by Radial Engineering Ltd.
In 1950 David Hafler and Herb Keroes started a Philadelphia-based company called Acrosound to build and sell audio-quality output transformers, primarily for home electronics hobbyists.[1] The two men refined and developed the ultra-linear audio circuit pioneered by British audio electronics engineer Alan Blumlein, using taps from the output transformer to feed signal back into the output stage screen grid circuitry.[1] The Acrosound transformer circuit was later used in many home-built and commercial hi-fi amplifiers in the early 1950s.[1] In order to appeal to a wider consumer market, Hafler decided to design and build entire power amplifiers as build-it-yourself kits, complete with preassembled, tested circuit boards that only required the customer to wire the boards to the transformers, controls, and power supply to complete the project.[1] This was a considerable advance over other audio system kits of the day, which generally required the purchaser to assemble and test the PC boards themselves, a relatively precise and time-consuming task.[1]
In 1954 Dave Hafler and Herb Keroes parted company.[1] During a visit to the New York-based Brociner Electronics the same year, Hafler met an audio engineer named Ed Laurent, who had designed a novel single-tube driver circuit for a power amplifier.[1] In 1955, the two men founded the Dyna Company (later Dynaco) with the intention of not only producing transformers but high-quality audio circuitry.[1] The company was incorporated in October 1955, with business premises located at 617 N. 41st St in Philadelphia.[1] Dynaco's first product was the Mk. II 50-watt power amplifier.[1] Available as a kit or preassembled unit, the Mk. II was sold for several years until its replacement in 1956 by the Mk. III amplifier, which produced 60 watts.[1] Hafler wrote an article for Radio-Electronics Magazine in 1955 delineating the design of a high-power version of the Williamson amplifier using ultra-linear circuitry and Dynaco's new output transformers.[1] The Williamson amplifier utilized a slightly different circuit design from the Mk. II and Mk. III.[1] Shortly thereafter, the company moved its business operations to 3912 Powelton Avenue in Philadelphia, where they remained for several years.[1]
Products
Today, Dynaco is best remembered for its highly regarded vacuum tube stereo amplifier, the Stereo 70 (ST 70). Introduced in 1959, the ST 70 was available as a kit (Dynakit) intended for assembly by the purchaser or as a complete factory-wired unit. The ST 70 used four EL34 output tubes, one GZ34/5AR4 rectifier tube, two 7199 input (driver) tubes, two output transformers, one power transformer, and a preassembled printed circuit board (PCB) containing the driver circuit. It produced 35 watts per channel. The driver circuit had a single 7199 pentode/triode tube per channel and used the driver tube to handle both voltage amplification and phase splitting. The output transformers are an ultralinear design, whereby part of the primary winding is fed back to the output tube's screen grid. This design reduced distortion and improved audio quality.
A masterpiece of efficient circuit design, the ST 70 provided reliable, high-quality audio amplification at an affordable price. The popularity of the ST 70 contributed more than any other single product to continuing consumer interest in tube-based stereo amplifiers at a time of increasing market dominance by solid state audio products. Because of its excellent value for cost, Dynaco tube amplifiers were often referred to as "the poor man's McIntosh." More than 350,000 ST-70 amplifiers had been sold when production finally ceased, making the ST 70 the most popular tube power amplifier ever made.[citation needed]
A smaller tube amplifier, the 17.5wpc Stereo 35, was introduced in 1963, and was followed the next year by the SCA 35, the company's first integrated (preamp + power amp) tube amplifier. In 1992, an updated version of the Stereo 70, the Stereo 70 II, was produced by Sound Valves for Panor Corporation. Even today, upgraded components, rebuilding kits, and complete tube amplifiers using the basic Stereo 70 design are still in production, and the ST 70 has inspired numerous other amplifier designs, such as Ars-Sonum's Filarmonia SE. Dynaco continued to build both mono and stereo amplifiers until 1977.
The company's final contribution to vacuum tube technology was the massive Mk. VI mono power amplifier of 1976, which produced 120 watts (continuous).
In later years, the company began to produce a line of solid-state audio components, commencing in 1966 with the introduction of the Stereo 120 power amplifier (60 wpc). Because of early problems involving circuit, power supply, and transistor failures, the ST 120 was not as popular as earlier Dynaco tube amplifiers. Numerous small circuit changes were introduced by Dynaco over the years in an attempt to improve the stability and reliability of the ST 120, without much success. With the PAT-4 preamplifier in 1967, the company affirmed its ability to design reliable solid state equipment at an affordable price. In 1969 the Dynaquad 4-channel matrix decoder system was introduced, helping to start the quadrophonic sound craze. In the 1970s, the Stereo 400 was developed and marketed. This was a high power amplifier at 200 watts per channel that offered automatic protection circuitry to prevent electrical destruction of the loudspeaker. The FM-5 tuner was offered as was the SCA-80 integrated amplifier in the early 1970s time line. Dynaco's solid-state kits were different from the popular Heathkit products (and Dynaco's own vacuum tube kits) because of their preassembled circuit boards. These boards were wired at the factory, tested and packaged with the unassembled chassis. It remained only for the consumer to attach the switches and controls to the chassis pieces, assemble the chassis and power supply, and solder connecting wires to the circuit boards. This saved considerable time and reduced error in assembly.
Dynaco also distributed the famous SEAS 'A-Series' of bookshelf loudspeakers that were manufactured in Denmark, using input from Dynaco's David Hafler and SEAS's Ragnar Lian. The A-Series were marketed between from 1970 until Dynaco's demise in the 1980s. The Dynaco A-25 model proved to be extremely successful, selling between 600,000 and 1,000,000 units.[2] A modified aperiodicbass reflex design using SEAS speakers in a handsome wood cabinet, the A-25 sold for $79.95 each in 1969[3] making it competitive with much more expensive loudspeakers. The patented aperiodic (essentially non-resonant) woofer design utilized a highly damped vent instead of a reflex port, whose acoustic resistance is very carefully controlled. The resistant venting action lowered the "Q" of the system and reduced impedance variation near resonance in the A-Series speakers. Dynaco followed the A-25 with the slightly larger A-35, which featured a dual-chambered, non-vented design in a walnut-veneered cabinet with even greater transparency and fidelity. Over time, Dynaco marketed a wide range of loudspeakers, ranging from the small A-10 model to the floor standing A-50 series. After some 30 years, these loudspeakers still command good prices in markets such as eBay, and are a testimonial to their quality.
Concurrent with A-25 production, Dynaco introduced the QD-1 speaker adapter which synthesized 4-channel sound from the stereo amplifier output. This "Dynaco patent" required a single resistor and a threeway potentiometer for the two rear speakers, generating phase difference signals for a feeling of ambience. The system worked best when the stereo sound had been recorded via two bidirectional microphones on the same spot. When microphone set-up changed to the use of multiple directional microphones and multitrack tape recording and postprocessing (i.c. in the CD era), the QD-1 was less effective.
Dynaco became a wholly owned subsidiary of Tyco, Inc. in 1969. David Hafler remained with the company a few years longer, but left in 1974 to join Ortofon, manufacturer and importer of high-end phono cartridges. In 1977, Hafler founded the Hafler Company, continuing the tradition of high quality but inexpensive kits and assembled hi-fi gear.
In the late 1970s, Dynaco released a short-lived set of new loudspeakers developed by Ed Laurent, the Phase III. The speakers were well regarded by the audiophile community, but their introduction was apparently too late to make any strong impression in the marketplace, and Ed Laurent left shortly afterward to join SEAS Corporation. After Dynaco closed its USA operations, its former Canadian subsidiary released the Dynaco A-150, A-250, and A-350 speakers, all manufactured in Canton, Massachusetts.[1] Critical reviews of the new audio speakers were not favorable, and they disappeared from the market in the mid-1980s.[1]
Sale of company
Dynaco was acquired by ESS Labs, LLC in 1979; the Dynaco division was closed in 1980 and its assets acquired by Stereo Cost Cutters (later called Sound Values and Sound Valves).
In 1991 the Pan Orient Corporation (later Panor Corporation) acquired the Dynaco trademark, and in 1993 began marketing electronic audio components with the Dynaco brand. Panor introduced some new products, such as the Stereo 70 II. Panor/Dynaco's most ambitious stereo tube amplifier was the Stereo 160, a 75 wpc, all-tube stereo power amplifier with switchable pentode/triode modes, adjustable tube bias potentiometers, and 6550 output tubes.
While Panor owns the Dynaco brand name and trademark, there is no longer any direct connection with the company founded by David Hafler.[1]
Dynaco tube equipment
Dynaco introduced tube audio amplifiers, tuners, and preamplifiers between 1955 and 1976.
An audio power amplifier is an electronic amplifier that amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all manner of sound systems including sound reinforcement, public address, home audio systems and musical instrument amplifiers like guitar amplifiers. It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers.
A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal. Low to medium power valve amplifiers for frequencies below the microwaves were largely replaced by solid state amplifiers in the 1960s and 1970s. Valve amplifiers can be used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS, high quality stereo amplifiers, military applications and very high power radio and UHF television transmitters.
The Williamson amplifier is a four-stage, push-pull, Class A triode-output valve audio power amplifier designed by D. T. N. Williamson during World War II. The original circuit, published in 1947 and addressed to the worldwide do it yourself community, set the standard of high fidelity sound reproduction and served as a benchmark or reference amplifier design throughout the 1950s. The original circuit was copied by hundreds of thousands amateurs worldwide. It was an absolute favourite on the DIY scene of the 1950s, and in the beginning of the decade also dominated British and North American markets for factory-assembled amplifiers.
PS Audio is an American company specializing in high-fidelity audio components equipment for audiophiles and the sound recording industry. It currently produces audio amplifiers, preamplifiers, power related products, digital-to-analog converters, streaming audio, music management software and cables.
DIY Audio, do it yourself audio. Rather than buying a piece of possibly expensive audio equipment, such as a high-end audio amplifier or speaker, the person practicing DIY Audio will make it themselves. Alternatively, a DIYer may take an existing manufactured item of vintage era and update or modify it. The benefits of doing so include the satisfaction of creating something enjoyable, the possibility that the equipment made or updated is of higher quality than commercially available products and the pleasure of creating a custom-made device for which no exact equivalent is marketed. Other motivations for DIY audio can include getting audio components at a lower cost, the entertainment of using the item, and being able to ensure quality of workmanship.
McIntosh Laboratory is an American manufacturer of handcrafted high-end audio equipment headquartered in Binghamton, New York. It is a subsidiary of McIntosh Group, which is under the ownership umbrella of Highlander Partners, a Dallas-based private equity firm.
Robert W. (Bob) Carver is an American designer of audio equipment based in the Pacific Northwest.
Gryphon Audio Designs is a manufacturer of high-end audio equipment located in Denmark. Gryphon is known for their extremely expensive cost-no-object audio equipment, with few updates and product changes compared to their competition.
QUAD Electroacoustics is a British manufacturer of hi-fi equipment, based Huntingdon, Cambridgeshire. QUAD is part of the IAG Group, with corporate headquarters located in Shenzhen, China.
A single-ended triode (SET) is a vacuum tube electronic amplifier that uses a single triode to produce an output, in contrast to a push-pull amplifier which uses a pair of devices with antiphase inputs to generate an output with the wanted signals added and the distortion components subtracted. Single-ended amplifiers normally operate in Class A; push-pull amplifiers can also operate in Classes AB or B without excessive net distortion, due to cancellation.
Sunn is a brand of musical instrument amplifiers based in Tualatin, Oregon, United States.
David Hafler was an American audio engineer. He was best known for his work on an improved version of the Williamson amplifier using the ultra-linear circuit of Alan Blumlein.
A valve audio amplifier (UK) or vacuum tube audio amplifier (US) is a valve amplifier used for sound reinforcement, sound recording and reproduction.
Luxman is a brand name of Japanese Luxman Corporation (ラックスマン株式会社) that manufactures luxury audio components. Luxman produces a variety of high-end audio products, including turntables, amplifiers, receivers, tape decks, CD players and speakers.
Technical specifications and detailed information on the valve audio amplifier, including its development history.
Constant-voltage speaker systems refer to networks of loudspeakers which are connected to an audio amplifier using step-up and step-down transformers to simplify impedance calculations and to minimize power loss over the speaker cables. They are more appropriately called high-voltage audio distribution systems. The voltage is constant only in the sense that at full power, the voltage in the system does not depend on the number of speakers driven. Constant-voltage speaker systems are also commonly referred to as 25-, 70-, 70.7-, 100 or 210-volt speaker systems; distributed speaker systems; or high-impedance speaker systems. In Canada and the US, they are most commonly referred to as 70-volt speakers. In Europe, the 100 V system is the most widespread, with amplifier and speaker products being simply labeled with 100 V.
Tube sound is the characteristic sound associated with a vacuum tube amplifier, a vacuum tube-based audio amplifier. At first, the concept of tube sound did not exist, because practically all electronic amplification of audio signals was done with vacuum tubes and other comparable methods were not known or used. After introduction of solid state amplifiers, tube sound appeared as the logical complement of transistor sound, which had some negative connotations due to crossover distortion in early transistor amplifiers. However, solid state amplifiers have been developed to be flawless and the sound is later regarded neutral compared to tube amplifiers. Thus the tube sound now means 'euphonic distortion.' The audible significance of tube amplification on audio signals is a subject of continuing debate among audio enthusiasts.
The NAD 3020 is a stereo integrated amplifier by NAD Electronics, considered to be one of the most important components in the history of high fidelity audio. Launched in 1978, this highly affordable product delivered a good quality sound, which acquired a reputation as an audiophile amplifier of exceptional value. By 1998, the NAD 3020 had become the most well known and best-selling audio amplifier in history.
Dynaquad, or DY, was a matrix decoder 4-channel quadraphonic sound system developed by Dynaco in 1969.
Nostalgic Kits Central Pictures, schematics, specifications and more of a large number of Dynaco products
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
