Dynamic steering response

Last updated

Dynamic steering response (DSR) is a vehicle safety and advanced power steering system that can counteract unstable or difficult steering that may be caused by external forces such as strong crosswinds or uneven roads by giving proper steering assistance from the steering gear. [1] DSR assists the driver by determining the correct steering ratio in a vehicle's power steering system to provide steering corrections to stabilize vehicles and increase safety. The system determines the steering ratio(the amount of turning of the steering wheel to the amount of turning of the vehicle’s wheels) based on factors such as current road conditions and vehicle speed. This system works by having an electric motor attached to the steering gear of a vehicle reducing or increasing the torque needed to steer based on the situation. [1] Thus, less physical input from the driver is required creating a more comfortable driving experience overall. [2]

Contents

DSR was first implemented in SEAT’s 2002 León Cupra R. [3] But according to Acumen Research and Consulting, as of February 04, 2020, among the companies that have manufactured DSR systems, “the leading competitors are BMW, Ford Motor, Volvo, ZF-TRW, AUDI, Bosch, Denso Corporation, Danfoss, and Knorr-Bremse”. [4] But DSR’s implementation is not limited to commercial cars as buses and industrial vehicles have taken advantage of the technology as well.

Components

The main components of Dynamic Steering Response systems in automobiles are the control unit, sensors, and the electric motor. [5] The control unit acts as the computer of the DSR unit and gives instructions to the electric motor. Instructions are determined by evaluating data from sensors to compute appropriate steering corrections. [5] Sensors collect data such as current vehicle speed, turning angle, terrain conditions, crosswind acceleration, and torque applied to the steering wheel. [5] [6] [7] The electric motor is a device powered by electricity that adds torque in the form of mechanical energy to a steering gear(the gear responsible for translating the rotation of the steering wheel to the actual turning of a vehicle). After calculating necessary steering corrections, the control unit instructs the electric motor to apply the torque needed to the vehicle's hydraulic steering gear. [5] For the motor's control, it picks up the data at 2000 times a second (as in Volvo truck FM Series) based on the input from the driver, and from the on-board sensors. Its purpose is to provide precise steering control in every situation.

Steering Correction in Certain Situations

The Dynamic Steering Response system can adapt to varying environments that would require steering assistance. Sensors constantly monitor road conditions and vehicle speed then relay this information to the control unit. The control unit’s instruction to the electric motor will differ based on the current environmental situations the vehicle faces. [1] [2] [5]

Crosswind Stabilization

When a crosswind is detected, the DSR system’s sensors take in data such as crosswind acceleration(the force of a crosswind perpendicular to the vehicle), tire friction(the force between the tires and the surface preventing the tires from sliding), the inertia of the vehicle(the vehicle’s tendency to drive in a stable direction), and the current steering angle. Observed data such as driving behavior and offset steering bias is also taken into account. Driving behavior is determined through the accumulation of data over a longer period rather than the data that’s collected by sensors in real-time such as the data mentioned above. Offset steering bias is also determined over a longer period where the driver’s tendency to rotate the steering wheel off-center when driving straight is recorded. The control unit will utilize the data above to calculate the force of the crosswind acting on the vehicle's center of mass and determine the torque the electric motor should exert on the steering hydraulics to stiffen the steering wheel the proper amount. [7]

Uneven Roads

The DSR system's sensors constantly monitor the conditions of the road to detect obstructions such as uneven pavement or potholes. If road conditions cause a vehicle to deviate from its path, DSR will correct its path by applying necessary torque to its steering column autonomously. [1] Drivers do not have to stabilize the steering wheel by hand as DSR will counteract the vibrations of the steering wheel caused by uneven roads. [6]

Fast/Slow Speeds

In situations where the vehicle is traveling at high speeds, the DSR system will tighten the steering wheel and lower the steering ratio to allow the vehicle to travel in a stable direction. [1] [2] The steering wheel will be set in place rather than having the driver hold the wheel tightly to prevent it from shaking. At lower speeds, the DSR system will increase the steering ratio by having the electric motor provide more assistance to the hydraulic steering system. [2] Thus, less torque is needed to be applied to the steering wheel when making sharp turns. This makes the action of steering feel lighter and more controlled. [5]

Benefits

It increases the vehicle's maneuverability, making it more comfortable to drive. This takes away the physical effort of steering even at low speeds, regardless of how heavy the load is, by continuous feedback and sensing by the system. It improves the directional stability at high speeds, so that no small steering adjustments are needed. It diminishes the effect of road disturbances such as bumps and potholes, on the steering wheel at the cockpit. It detects the unwanted deviations in the wheels, with the electric servo motor balances it out.

Dynamic Steering Response systems reduce the torque required by drivers to make turns and stabilize their vehicles. In 2018, a study done by the International Journal of Occupational Safety and Ergonomics determined that dynamic steering reduced overall muscle activity on average by 15-25% when turning. They also reported a 68% reduction of muscle activity on steering maneuvers that required full ranges of motion from the drivers. [8] Dynamic steering makes driving a more comfortable experience as pain and risk of injury from muscle activity is greatly reduced. [2]

DSR systems also make driving more safer as vehicle stability and steering control is greatly improved. Obstacles on the road such as uneven grounds or potholes can cause unstable driving. But with DSR, vehicles now have greater directional stability counteracting the forces of uneven surfaces and potholes, reducing accidents. In addition to the reduction of driving fatigue, precise control of turns and stability at higher speeds ultimately increases safety with the implementation of DSR. The issue of possible electrical or sensor failure in DSR is also accounted for. In the case of this event, DSR is programmed to shut itself and the electric motor off to revert the vehicle back to hydraulic steering(steering without the assistance of DSR). [5] [9]

[10]

Related Research Articles

<span class="mw-page-title-main">Steering</span> The control of the direction of motion of vehicles and other objects

Steering is the control of the direction of locomotion.

<span class="mw-page-title-main">Volvo S60</span> Swedish compact executive sedan

The Volvo S60 is a compact executive car manufactured and marketed by Volvo since 2000.

<span class="mw-page-title-main">Electronic stability control</span> Computerized safety automotive technology

Electronic stability control (ESC), also referred to as electronic stability program (ESP) or dynamic stability control (DSC), is a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding). When ESC detects loss of steering control, it automatically applies the brakes to help steer the vehicle where the driver intends to go. Braking is automatically applied to wheels individually, such as the outer front wheel to counter oversteer, or the inner rear wheel to counter understeer. Some ESC systems also reduce engine power until control is regained. ESC does not improve a vehicle's cornering performance; instead, it helps reduce the chance of the driver losing control of the vehicle.

A traction control system (TCS), is typically a secondary function of the electronic stability control (ESC) on production motor vehicles, designed to prevent loss of traction of the driven road wheels. TCS is activated when throttle input and engine power and torque transfer are mismatched to the road surface conditions.

<span class="mw-page-title-main">Limited-slip differential</span> Differential gearbox that limits the rotational speed difference of output shafts

A limited-slip differential (LSD) is a type of differential gear train that allows its two output shafts to rotate at different speeds but limits the maximum difference between the two shafts. Limited-slip differentials are often known by the generic trademark Positraction, a brand name owned by General Motors and originally used for its Chevrolet branded vehicles.

<span class="mw-page-title-main">Locking differential</span> Mechanical component which forces two transaxial wheels to spin together

A locking differential is a mechanical component, commonly used in vehicles, designed to overcome the chief limitation of a standard open differential by essentially "locking" both wheels on an axle together as if on a common shaft. This forces both wheels to turn in unison, regardless of the traction available to either wheel individually.

<span class="mw-page-title-main">Lane departure warning system</span> Mechanism designed to warn a driver when the vehicle begins to move out of its lane

In road-transport terminology, a lane departure warning system (LDWS) is a mechanism designed to warn the driver when the vehicle begins to move out of its lane on freeways and arterial roads. These systems are designed to minimize accidents by addressing the main causes of collisions: driver error, distractions and drowsiness. In 2009 the U.S. National Highway Traffic Safety Administration (NHTSA) began studying whether to mandate lane departure warning systems and frontal collision warning systems on automobiles.

<span class="mw-page-title-main">Drive by wire</span> Automotive technology

Drive by wire or DbW technology in the automotive industry is the use of electronic or electro-mechanical systems in place of mechanical linkages that control driving functions. The concept is similar to fly-by-wire in the aviation industry. Drive-by-wire may refer to just the propulsion of the vehicle through electronic throttle control, or it may refer to electronic control over propulsion as well as steering and braking, which separately are known as steer by wire and brake by wire, along with electronic control over other vehicle driving functions.

<span class="mw-page-title-main">Tilting three-wheeler</span> Tilting three-wheeled vehicle

A tilting three-wheeler, tilting trike, leaning trike, or even just tilter, is a three-wheeled vehicle and usually a narrow-track vehicle whose body and or wheels tilt in the direction of a turn. Such vehicles can corner without rolling over despite having a narrow axle track because they can balance some or all of the roll moment caused by centripetal acceleration with an opposite roll moment caused by gravity, as bicycles and motorcycles do. This also reduces the lateral acceleration experienced by the rider, which some find more comfortable than the alternative. The narrow profile can result in reduced aerodynamic drag and increased fuel efficiency. These types of vehicles have also been described as "man-wide vehicles" (MWV).

Power steering is a system for reducing a driver's effort to turn a steering wheel of a motor vehicle, by using a power source to assist steering.

A transmission control unit (TCU), also known as a transmission control module (TCM), or a gearbox control unit (GCU), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation. A TCU in a modern automatic transmission generally uses sensors from the vehicle, as well as data provided by the engine control unit (ECU), to calculate how and when to change gears in the vehicle for optimum performance, fuel economy and shift quality.

An active suspension is a type of automotive suspension that uses an onboard control system to control the vertical movement of the vehicle's wheels and axles relative to the chassis or vehicle frame, rather than the conventional passive suspension that relies solely on large springs to maintain static support and dampen the vertical wheel movements caused by the road surface. Active suspensions are divided into two classes: true active suspensions, and adaptive or semi-active suspensions. While semi-adaptive suspensions only vary shock absorber firmness to match changing road or dynamic conditions, active suspensions use some type of actuator to raise and lower the chassis independently at each wheel.

The following outline is provided as an overview of and topical guide to automobiles:

Cornering Brake Control (CBC) is an automotive safety measure that improves handling performance by distributing the force applied on the wheels of a vehicle while turning corners. Introduced by BMW in 1992, the technology is now featured in modern electric and gasoline vehicles such as cars, motorcycles, and trucks. CBC is often included under the Electronic Stability Control (ESC) safety feature provided by vehicle manufacturers.

A wheelspin occurs when the force delivered to the tire tread exceeds that of available tread-to-surface friction and one or more tires lose traction. This leads the wheels to "spin" and causes the driver to lose control over the tires that no longer have grip on the road surface. Wheelspin can also be done intentionally such as in drifting or doing a burnout.

<span class="mw-page-title-main">Steer-by-wire</span> Automotive technology

Steer-by-wire, in the context of the automotive industry, is a technology or system that allows steering some or all of a vehicle's wheels without a steering column connected to the wheel axles. It is different from electric power steering or power-assist, as those systems still rely on the steering column to transfer some steering torque to the wheels. It is often associated with other drive by wire technologies.

<span class="mw-page-title-main">Differential steering</span> The steering method used by tanks and similar tracked vehicles

Differential steering is the means of steering a land vehicle by applying more drive torque to one side of the vehicle than the other. Differential steering is the primary means of steering tracked vehicles, such as tanks and bulldozers, is also used in certain wheeled vehicles commonly known as skid-steer, and even implemented in some automobiles, where it is called torque vectoring, to augment steering by changing wheel direction relative to the vehicle. Differential steering is distinct from torque steer, which is usually considered a negative side effect of drive-train design choices.

S-AWC is the brand name of an advanced full-time four-wheel drive system developed by Mitsubishi Motors. The technology, specifically developed for the new 2007 Lancer Evolution, the 2010 Outlander, the 2014 Outlander, the Outlander PHEV and the Eclipse Cross have an advanced version of Mitsubishi's AWC system. Mitsubishi Motors first exhibited S-AWC integration control technology in the Concept-X model at the 39th Tokyo Motor Show in 2005. According to Mitsubishi, "the ultimate embodiment of the company's AWC philosophy is the S-AWC system, a 4WD-based integrated vehicle dynamics control system".

All Wheel Control (AWC) is the brand name of a four-wheel drive (4WD) system developed by Mitsubishi Motors. The system was first incorporated in the 2001 Lancer Evolution VII. Subsequent developments have led to S-AWC (Super All Wheel Control), developed specifically for the new 2007 Lancer Evolution. The system is referred by the company as its unique 4-wheel drive technology umbrella, cultivated through its motor sports activities and long history in rallying spanning almost half a century.

Crosswind stabilization (CWS) is a relatively new advanced driver-assistance system in cars and trucks that was first featured in a 2009 Mercedes-Benz S-Class. CWS assists drivers in controlling a vehicle during strong wind conditions such as driving over a bridge or when overtaking a semi-truck. CWS uses yaw rate, lateral acceleration, steering angle, and velocity sensors to determine how much assistance to give the driver in a certain scenario whether it be at different speeds or while turning. Using different components throughout the vehicle like brakes, differentials, and suspension, CWS can implement the readings from force sensors to properly assist the driver in a given situation.

References

  1. 1 2 3 4 5 Cannon, Jason (2019-09-19). "Test drive: Volvo Dynamic Steering". Commercial Carrier Journal. Archived from the original on 2020-01-30.
  2. 1 2 3 4 5 "STUDY SHOWS CLEAR BENEFITS FOR THE DRIVER WITH VOLVO DYNAMIC STEERING". Volvo Buses. 2020-01-14. Archived from the original on 2020-09-27.
  3. ↑ SEAT NEWS (2003-07-03). "New SEAT León Cupra R". VWVortex.
  4. ↑ "Automotive Dynamic Steering Market Size Worth Around US$ 2,017.4 Mn by 2026". GlobeNewswire. 2020-02-04.
  5. 1 2 3 4 5 6 7 "HOW IT WORKS: WHAT IS VOLVO DYNAMIC STEERING?". Volvo Buses. 2020-01-22. Archived from the original on 2020-09-29.
  6. 1 2 Seo, Ja-Ho; Oh, Kwang-Seok; Noh, Hong-Jun (2019-06-21). "Model predictive control–based steering control algorithm for steering efficiency of a human driver in all-terrain cranes". Advances in Mechanical Engineering. 11 (6). doi: 10.1177/1687814019859783 . S2CID   197447570.
  7. 1 2 Pfeiffer, Jens; Rudibert, King (2018-02-09). "Robust control of drag and lateral dynamic response for road vehicles exposed to cross‑wind gusts". Experiments in Fluids. 59 (3): 45. Bibcode:2018ExFl...59...45P. doi: 10.1007/s00348-017-2479-7 . S2CID   125804163.
  8. ↑ Ahlström, Christer; Gink Lövgren, Maria; Nilsson, Mats; Dukic Willstrand, Tania; Anund, Anna (2019-07-03). "The effect of an active steering system on city bus drivers' muscle activity". International Journal of Occupational Safety and Ergonomics. 25 (3): 377–385. doi: 10.1080/10803548.2018.1445465 . ISSN   1080-3548. PMID   29482453. S2CID   3583520.
  9. ↑ Berg, Tom (2019-09-17). "Volvo Dynamic Steering cuts driver effort, fatigue". Landline. Archived from the original on 2020-10-30.
  10. ↑ "Volvo Trucks".
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.