 | This article needs additional citations for verification .(September 2014) |
The automotive steering column is a device intended primarily for connecting the steering wheel to the steering mechanism.
A steering column may also perform the following secondary functions:
Modern vehicles are fitted with a steering lock which is an anti-theft device. It is fitted to the steering column usually below the steering wheel. The lock is combined with the ignition switch and engaged and disengaged either by a mechanical ignition key or electronically from the vehicles electronic control unit. These locks were introduced on many General Motors products in 1969 drastically reducing thefts of these GM models, [1] and on Ford, Chrysler, and AMC products in 1970.
A common device to enhance car safety is the collapsible steering column. This is designed to collapse in the event of a collision to protect the driver from harm. The column can collapse after impact with a tolerance ring inserted between the inner shaft of the steering column and the external housing. The wavelike protrusions on the circumference of the tolerance ring act as a spring to hold the two parts in place in normal driving conditions. At a specific level of force, for example in the event of a collision, the tolerance ring allows the inner shaft to slip inside the housing, so the column can collapse, absorbing energy from the impact. [2]
In virtually all modern vehicles, the lower section of the inner shaft is articulated with universal joints which helps control movement of the column in a frontal impact, and also gives engineers freedom in mounting the steering gear itself.
In the United States, steering columns are governed by several federal regulatory requirements, notably FMVSS 108, 114 and 208. The Chinese directive GB15740- 2006 obligates Chinese car manufacturers to incorporate anti-theft mechanisms in their vehicles. [3] European Union Commission Directive 95/56/EC (1995) mandates all cars exported to European markets must be fitted with anti-theft security devices. This regulation also requires that a steering lock must be able to withstand forces of 100Nm applied to the steering wheel without failing. [4]
A differential is a gear train with three drive shafts that has the property that the rotational speed of one shaft is the average of the speeds of the others. A common use of differentials is in motor vehicles, to allow the wheels at each end of a drive axle to rotate at different speeds while cornering. Other uses include clocks and analog computers.
Motor vehicle theft is the criminal act of stealing or attempting to steal a motor vehicle. Nationwide in the United States in 2020, there were 810,400 vehicles reported stolen, up from 724,872 in 2019. Property losses due to motor vehicle theft in 2020 were estimated at $7.4 billion. There were 505,100 car thefts in the EU in 2019, a 43% decrease from 2008.
Steering is a system of components, linkages, and other parts that allows a driver to control the direction of the vehicle.
A manual transmission (MT), also known as manual gearbox, standard transmission, or stick shift, is a multi-speed motor vehicle transmission system, where gear changes require the driver to manually select the gears by operating a gear stick and clutch.
A parking pawl is a device fitted to a motor vehicle's automatic transmission that locks up the transmission when the transmission shift lever selector is placed in the Park position. "Park" is the first position of the lever in all cars sold in the United States since 1965 through SAE J915, and in most other vehicles worldwide.
In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. An overdrive is sometimes mistakenly called a freewheel, but is otherwise unrelated.
A limited-slip differential (LSD) is a type of differential that allows its two output shafts to rotate at different speeds but limits the maximum difference between the two shafts. Limited-slip differentials are often known by the generic trademark Positraction, a brand name owned by General Motors.
A steering wheel is a type of steering control in vehicles.
In automotive design, a front-engine, front-wheel-drive (FWD) layout, or FF layout, places both the internal combustion engine and driven roadwheels at the front of the vehicle.
A car key or an automobile key is a key used to open and/or start an automobile. Modern key designs are usually symmetrical, and some use grooves on both sides, rather than a cut edge, to actuate the lock. It has multiple uses for the automobile with which it was sold. A car key can open the doors, as well as start the ignition, open the glove compartment and also open the trunk (boot) of the car. Some cars come with an additional key known as a valet key that starts the ignition and opens the driver's side door, but prevents the valet from gaining access to valuables that are located in the trunk or the glove box. Some valet keys, particularly those to high-performance vehicles, go so far as to restrict the engine's power output to prevent joyriding. Recently, features such as coded immobilizers have been implemented in newer vehicles. More sophisticated systems make ignition dependent on electronic devices, rather than the mechanical keyswitch. A number of these systems, such as KeeLoq and Megamos Crypto have been demonstrated to be weak and vulnerable to cryptanalytic attacks.
The Maserati Khamsin is a grand tourer produced by Italian automobile manufacturer Maserati between 1974 and 1982. The Khamsin was sold alongside the DeTomaso-based Maserati Kyalami — also a V8 2+2 GT car - between 1976 and 1982.
An immobiliser or immobilizer is an electronic security device fitted to a motor vehicle that prevents the engine from being started unless the correct key is present. This prevents the vehicle from being "hot wired" after entry has been achieved and thus reduces motor vehicle theft. Research shows that the uniform application of immobilisers reduced the rate of car theft by 40%.
The following outline is provided as an overview of and topical guide to automobiles:
An anti-hijack system is an electronic system fitted to motor vehicles to deter criminals from hijacking them. Although these types of systems are becoming more common on newer cars, they have not caused a decrease in insurance premiums as they are not as widely known as other more common anti-theft systems such as alarms or steering locks. It can also be a part of an alarm or immobiliser system. An approved anti-hijacking system will achieve a safe, quick shutdown of the vehicle it is attached to. There are also mechanical anti-hijack devices.
Active steering describes a steering system for a vehicle in which the relationship between the driver’s steer inputs and the angle of the steered road wheels may be continuously and intelligently altered. Whilst active steering systems may be found in agricultural equipment and heavy plant, this article concentrates on the application of active steering in BMW passenger cars.
A motorcycle transmission is a transmission created specifically for motorcycle applications. They may also be found in use on other light vehicles such as motor tricycles and quadbikes, go-karts, offroad buggies, auto rickshaws, mowers, and other utility vehicles, microcars, and even some superlight racing cars.
The Lanchester Eighteen at first known as the 15/18 was announced at the beginning of October 1931. Quite unlike any previous Lanchester it was their first new car following BSA's takeover of The Lanchester Motor Company Limited in January 1931. A medium sized car was a new departure for Lanchester.
Car controls are the components in automobiles and other powered road vehicles, such as trucks and buses, used for driving and parking.
Tolerance rings are radially sprung rings that are press fitted between two mating components to act as frictional fasteners. They are flexible shims designed to fix two cylindrical parts together. The wavelike protrusions that run around the circumference of the ring generate a retention force to provide an optimal fit between the two mating components without the need for adhesive or excessive assembly force, simplifying the process for manufacturers. They allow for any misalignment caused by thermal expansion or excessive vibration. Tolerance rings can be used as bearing mounts and as a means of dealing with torque transfer, torque overload protection and axial slip between mating components. They are often used to isolate undesirable vibration in engines and electric motors, for noise-free mechanism operation in passenger vehicles and domestic appliances, where noise reduction has become a major trend in recent years. Modifications to tolerance rings can be made to tune the dynamic stiffness and, therefore, the frequencies that can be isolated.