Elton's quadrant

Last updated
A portrait of a sea captain holding an Elton's quadrant by John Vanderbank. The captain depicted is possibly Elton himself. John Vanderbank (1694-1739) - A Merchant Captain with Elton's Quadrant - BHC3128 - Royal Museums Greenwich.jpg
A portrait of a sea captain holding an Elton's quadrant by John Vanderbank. The captain depicted is possibly Elton himself.

An Elton's quadrant is a derivative of the Davis quadrant. It adds an index arm and artificial horizon to the instrument, and was invented by English sea captain John Elton, who patented his design in 1728 and published details of the instrument in the Philosophical Transactions of the Royal Society in 1732. [1] [2]

Contents

Construction

Drawing of Elton's Quadrant. From Philosophical Transactions of the Royal Society, No. 423, Vol 37, 1731-1732.
This instrument is derived from the Davis quadrant, adding an index arm with spirit levels to use as an artificial horizon.
The instrument is signed J. Sisson fecit - Jonathan Sisson made the instrument as drawn. Elton-quadrant.jpg
Drawing of Elton's Quadrant. From Philosophical Transactions of the Royal Society, No. 423, Vol 37, 1731-1732.
This instrument is derived from the Davis quadrant, adding an index arm with spirit levels to use as an artificial horizon.
The instrument is signed J. Sisson fecit - Jonathan Sisson made the instrument as drawn.

This instrument clearly reflects the shape and features of the Davis quadrant. The significant differences are the change in the upper arc to a simple triangular frame and the addition of an index arm. The triangular frame at the top spans 60° as did the arc on the backstaff. The main graduated arc subtends 30° as in the backstaff. The 30° arc is graduated in degrees and sixths of a degree, that is, at ten-minute intervals.

The sighting vane of the backstaff is replaced with a sight (called an eye vane [2] ) mounted on the end of the index arm.

The index arm includes a nonius [3] [2] [4] to allow reading the large scale with ten divisions between the graduations on the scale. This provides the navigator with the ability to read the scale to the nearest minute of arc. The index arm has a spirit level to allow the navigator to ensure that the index is horizontal even when he cannot see the horizon.

The instrument has a horizon vane like a Davis quadrant, but Elton refers to it as the shield or ray vane. [2] The shield is attached to the label. [5] The label is an arm that extends from the centre of the arc to the outside of the upper triangle and can be set to one of the three positions in the triangle (in the diagram, it appears to bisect the triangle as it is set to the centre or 30° position). At the upper end of the label is a Flamsteed glass or lens. [2]

The three set positions allow the instrument to read 0° to 30°, 30° to 60° or 60° to 90°. The lens projects an image of the Sun rather than a shadow of the Sun on the shield. This provides an image even when the sky is hazy or lightly overcast. In addition, at the mid-span of the label there is a mounting point for a lantern to be used during nocturnal observations.

There are two spirit levels on the shield. One, called the azimuth tube, ensures that the plane of the instrument is vertical. The other is perpendicular to the shield and will indicate when the plane of the shield is vertical and the label is horizontal.

Usage

Solar altitude by backsight

For measuring the altitude of the Sun, the Elton's quadrant can be used in the same manner as a Davis quadrant. However, with the artificial horizon, the eye vane is not required to be used.

Hold the instrument in a comfortable manner with the arc towards the Sun. Set the label so that the Sun's image is projected on the shield at the hole with the index arm roughly horizontal. Move the index arm so that the index's spirit level shows the arm is precisely horizontal. This sets the instrument and the angle can be read with the scale and nonius.

Stellar altitude by foresight

This is a means of measuring altitude of a celestial object that is very different from what can be done with a Davis quadrant. It reveals one of the significant improvements of the Elton's quadrant over the former instrument.

Set the label to a position that will put the object to be measured within the range of the instrument. Observe the object through the eye vane so that the object touches the upper edge of the shield while using the azimuth tube to ensure that the frame is vertical. Move the index arm so that the shield's horizontal tube indicates that the shield is precisely vertical. This sets the instrument and the angle can be read on the arc.

Significance to navigation

The Elton's quadrant is not very well known as a navigation instrument. It was used, though to what degree is not known. Elton had the misfortune to invent his instrument in the same period of time as the octant. In fact, John Hadley published details on his octant prior to Elton's article in the same volume of the Philosophical Transactions (article 37 vs 48).

Given that Elton's quadrant was roughly as complex as an octant in construction, there would not likely be a significant advantage in price. The octant was an easier instrument to use and Hadley had supported the use of artificial horizons on the octant in the form of spirit levels. This would have given no advantage to Elton's instrument. In addition, there were many other instruments competing for the attention of navigators in this period. In the end, the Hadley octant and later sextant took precedence as instruments for navigators.

Related Research Articles

<span class="mw-page-title-main">Sextant</span> Tool for angle measurement

A sextant is a doubly reflecting navigation instrument that measures the angular distance between two visible objects. The primary use of a sextant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation.

<span class="mw-page-title-main">Vernier scale</span> Auxiliary scale of a measurement device, used to increase precision

A vernier scale, named after Pierre Vernier, is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation, thereby increasing resolution and reducing measurement uncertainty by using vernier acuity to reduce human estimation error. It may be found on many types of instrument measuring linear or angular quantities, but in particular on a vernier caliper, which measures lengths.

<span class="mw-page-title-main">Pedro Nunes</span> Portuguese mathematician (1502–1578)

Pedro Nunes was a Portuguese mathematician, cosmographer, and professor, probably from a New Christian family.

<span class="mw-page-title-main">Theodolite</span> Optical surveying instrument

A theodolite is a precision optical instrument for measuring angles between designated visible points in the horizontal and vertical planes. The traditional use has been for land surveying, but it is also used extensively for building and infrastructure construction, and some specialized applications such as meteorology and rocket launching.

<span class="mw-page-title-main">Alidade</span> Device that allows one to sight a distant object

An alidade or a turning board is a device that allows one to sight a distant object and use the line of sight to perform a task. This task can be, for example, to triangulate a scale map on site using a plane table drawing of intersecting lines in the direction of the object from two or more points or to measure the angle and horizontal distance to the object from some reference point's polar measurement. Angles measured can be horizontal, vertical or in any chosen plane.

<span class="mw-page-title-main">John Hadley</span> English mathematician

John Hadley was an English mathematician, and laid claim to the invention of the octant, two years after Thomas Godfrey claimed the same.

<span class="mw-page-title-main">Pierre Vernier</span> French mathematician

Pierre Vernier was a French mathematician and instrument inventor. He was the inventor and eponym of the vernier scale used in measuring devices.

The backstaff is a navigational instrument that was used to measure the altitude of a celestial body, in particular the Sun or Moon. When observing the Sun, users kept the Sun to their back and observed the shadow cast by the upper vane on a horizon vane. It was invented by the English navigator John Davis, who described it in his book Seaman's Secrets in 1594.

<span class="mw-page-title-main">Jacob's staff</span> Measurement tool

The term Jacob's staff is used to refer to several things, also known as cross-staff, a ballastella, a fore-staff, a ballestilla, or a balestilha. In its most basic form, a Jacob's staff is a stick or pole with length markings; most staffs are much more complicated than that, and usually contain a number of measurement and stabilization features. The two most frequent uses are:

<span class="mw-page-title-main">Octant (instrument)</span> Measuring instrument used primarily in navigation; type of reflecting instrument

The octant, also called a reflecting quadrant, is a reflecting instrument used in navigation.

<span class="mw-page-title-main">Mariner's astrolabe</span> Nautical navigational instrument

The mariner's astrolabe, also called sea astrolabe, was an inclinometer used to determine the latitude of a ship at sea by measuring the sun's noon altitude (declination) or the meridian altitude of a star of known declination. Not an astrolabe proper, the mariner's astrolabe was rather a graduated circle with an alidade used to measure vertical angles. They were designed to allow for their use on boats in rough water and/or in heavy winds, which astrolabes are ill-equipped to handle. It was invented by the Portuguese people, a nation known for its maritime prowess that dominated the sea for multiple centuries. In the sixteenth century, the instrument was also called a ring.

<span class="mw-page-title-main">Dividing engine</span>

A dividing engine is a device employed to mark graduations on measuring instruments.

<span class="mw-page-title-main">Quadrant (instrument)</span> Navigation instrument

A quadrant is an instrument used to measure angles up to 90°. Different versions of this instrument could be used to calculate various readings, such as longitude, latitude, and time of day. Its earliest recorded usage was in ancient India in Rigvedic times by Rishi Atri to observe a solar eclipse. It was then proposed by Ptolemy as a better kind of astrolabe. Several different variations of the instrument were later produced by medieval Muslim astronomers. Mural quadrants were important astronomical instruments in 18th-century European observatories, establishing a use for positional astronomy.

<span class="mw-page-title-main">Transversal (instrument making)</span>

Transversals are a geometric construction on a scientific instrument to allow a graduation to be read to a finer degree of accuracy. Their use creates what is sometimes called a diagonal scale, an engineering measuring instrument which is composed of a set of parallel straight lines which are obliquely crossed by another set of straight lines. Diagonal scales are used to measure small fractions of the unit of measurement.

Reflecting instruments are those that use mirrors to enhance their ability to make measurements. In particular, the use of mirrors permits one to observe two objects simultaneously while measuring the angular distance between the objects. While reflecting instruments are used in many professions, they are primarily associated with celestial navigation as the need to solve navigation problems, in particular the problem of the longitude, was the primary motivation in their development.

<span class="mw-page-title-main">Sine quadrant</span> Type of quadrant used by medieval Arabic astronomers

A sine quadrant, sometimes known as a "sinecal quadrant", was a type of quadrant used by medieval Arabic astronomers. The instrument could be used to measure celestial angles, tell time, find directions, perform trigonometric computations, and determine the apparent positions of any celestial object for any time. The name is derived from the Arabic rub meaning 'a quarter' and mujayyab meaning 'marked with sine'.

<span class="mw-page-title-main">Nonius (device)</span>

Nonius is a measuring tool used in navigation and astronomy named in honour of its inventor, Pedro Nunes, a Portuguese author, mathematician and navigator. The nonius was created in 1542 as a system for taking finer measurements on circular instruments such as the astrolabe. The system was eventually adapted into the Vernier scale in 1631 by the French mathematician Pierre Vernier.

<span class="mw-page-title-main">Spencer, Browning & Rust</span>

Spencer, Browning & Rust was a London firm that manufactured instruments for navigational use during the 18th and 19th centuries. The predecessor company of Spencer and Browning was established by William Spencer and Samuel Browning in 1778, before they entered into partnership with Ebenezer Rust in 1784. After the death of Ebenezer Rust's son, the successor business was known as Spencer, Browning & Co. The firm of Spencer, Browning & Rust made a variety of navigational instruments, including octants and sextants.

Jonathan Sisson was a prominent English instrument maker, the inventor of the modern theodolite with a sighting telescope for surveying, and a leading maker of astronomical instruments.

The Greeks studied the results of the measurements of latitude by the explorer Pytheas who voyaged to Britain and beyond, as far as the Arctic Circle, in 325 BC. They used several methods to measure latitude, including the height of the Sun above the horizon at midday, measured using a gnōmōn ; the length of the day at the summer solstice, and the elevation of the Sun at winter solstice.

References

  1. 1 2 Bennett, Jim, "Catadioptrics and commerce in eighteenth-century London", in History of Science, vol xliv, 2006, pages 247-277.
  2. 1 2 3 4 5 Elton, John, The Description of a New Quadrant for Taking Altitudes Without an Horizon, Either at Sea or Land, Philosophical Transactions of the Royal Society, Vol 37, No. 423, 1731-1732.
  3. in fact, it may be a vernier scale referred to by the older, inexact name. Bennett [1] refers to it as a vernier.
  4. Daumas, Maurice, Scientific Instruments of the Seventeenth and Eighteenth Centuries and Their Makers, Portman Books, London 1989 ISBN   978-0-7134-0727-3 - Daumas points out that the name nonius continued to be used instead of vernier until the beginning of the 19th century.
  5. Label is an older term for a long, thin device, in particular the rule on an astrolabe, circumferentor or similar instrument. It differs from an alidade in that it has no sighting vanes on it. In this latter detail, Elton's use of the term may be inappropriate.