Energy Catalyzer

Last updated

The Energy Catalyzer (also called E-Cat) is a claimed cold fusion reactor [1] [2] devised by inventor Andrea Rossi [3] with support from the late physicist Sergio Focardi. [4] [5] An Italian patent, which received a formal but not a technical examination, describes the apparatus as a "process and equipment to obtain exothermal reactions, in particular from nickel and hydrogen". [6] Rossi and Focardi said the device worked by infusing heated hydrogen into nickel powder, transmuting it into copper and producing excess heat. [7] [8] An international patent application [1] received an unfavorable international preliminary report on patentability in 2011 because it was adjudged to "offend against the generally accepted laws of physics and established theories". [9]

Contents

The device has been the subject of demonstrations and tests several times, and commented on by various academics and others. No independent tests have ever been made, and no peer-reviewed tests of the device have ever been published. Steve Featherstone wrote in Popular Science that by the summer of 2012 Rossi's "outlandish claims" for the E-Cat seemed "thoroughly debunked". [10]

Demonstrations

Invited guests attended several demonstrations in Bologna in 2011. [11] The device has not been independently verified. Of a January demonstration, Discovery Channel analyst Benjamin Radford wrote that "If this all sounds fishy to you, it should," and that "In many ways cold fusion is similar to perpetual motion machines. The principles defy the laws of physics, but that doesn't stop people from periodically claiming to have invented or discovered one." [12] According to Phys.org (11 August 2011), the demonstrations held from January to April 2011 had several flaws that compromised their credibility and Rossi had refused to perform tests that could verify his claims. [2]

University of Bologna researchers have attended some E-Cat demonstrations, but only as observers. On 5 November 2011, the University of Bologna clarified that its researchers had not been involved in the demonstrations and that none of those took place at the university. Rossi had signed a contract with the university, but the contract was terminated and no research was done because Rossi did not make the first payment. [13] [14] [15] [16] [17]

Skeptic Ian Bryce speculated that the E-Cat was misconnected during demonstrations, and that the power attributed to fusion is supplied to the device through the earth wire. [18] [19] Dick Smith offered Rossi one million dollars to demonstrate that the E-Cat system worked as claimed, while the power through the earth wire was also being measured, which Rossi refused. [20] [21] Peter Thieberger, a senior physicist at Brookhaven National Laboratory, said it would be very difficult for this misconnection to happen by accident and that the issue could only be cleared with a fully independent test. [18]

On 28 October 2011 the unit was "customer tested" and was said to release 2,635 kWh during five and a half hours of self-sustained mode, an average power of 479 kilowatts – just under half the promised power of one megawatt. Independent observers were not allowed to watch the measurements or make their own, and the plant remained connected to a power supply during the test allegedly to supply power to the fans and the water pumps. [22] [23] [24]

After working with Rossi, Sergio Focardi concluded that nuclear fusion reactions happen inside the Energy Catalyzer. Focardi states that the nuclear process is facilitated by a secret additive, known only by Rossi and not by him. According to Focardi, the process would be much less intense without this additive. [11] Rossi and Focardi are then reported to have been unable to find a peer-reviewed scientific journal that would publish their paper describing how they claim the Energy Catalyzer operates. [25] Their paper appears only in Rossi's self-published blog, [26] Journal of Nuclear Physics. [27]

In May 2013 a non-peer-reviewed paper describing "results obtained from evaluations of the operation of the E-Cat HT in two test runs" was submitted to the arXiv digital archive. [28] Although the authors of the paper wrote that they were not in control of all of the aspects of the process, they concluded that, even by the most conservative of measurements, the device produced excess heat with a resulting energy density that was at least one order of magnitude, and possibly several, higher than any other conventional energy source. [29] [30] [31] The test was partly funded by the Swedish energy research consortium, Elforsk. [32] Elforsk stated on their website that the results were very remarkable, but that it was highly questionable to speculate whether nuclear transformation had occurred when no access had been provided to the reactants. [33] In a response to the original manuscript archived on arXiv, commentators criticized the testing as not truly independent, described the report as having "characteristics more typically found in pseudo‐scientific texts", and stated that "The authors seem to jump to conclusions fitting pre‐conceived ideas where alternative explanations are possible." [34] [35] [36] Astrophysicist Ethan Siegel commented at ScienceBlogs saying Rossi did not allow the reactants or products to be measured on this occasion. In the previous tests there were not enough 62
Ni and 64
Ni (the only two nickel isotopes which can fuse with hydrogen), at 3.6% and 0.9% respectively, in the reactants to explain the 10% copper output; these isotope levels are typical of natural copper, rather than of fusion by-product. According to Siegel, Rossi also refused to unplug the machine while it was operating despite it being an easy way to surreptitiously power the device. He also added that the supposedly independent testers had to rely on data supplied by Rossi. [37]

In October 2014 a non-peer-reviewed paper by the same authors as the May 2013 report describes results from evaluations in March 2014 of an upgraded version of the E-Cat which runs at higher temperatures. Unlike previous demonstrations, the test was carried out with monitoring equipment and in a laboratory not supplied by Rossi, and was run over an extended duration (32 days). [38] However, as with the previous report, the authors were not in full control of the process; Rossi intervened during the insertion of the fuel charge, start up of the reactor, shut down of the reactor, and extraction of the spent fuel. Overall, the total excess heat measured was calculated to be well beyond that possible by any conventional, non-nuclear source. In this report, they present analyses of samples of spent fuel, concluding from the isotopes found that "nuclear reactions are therefore indicated to be present in the run process, which however is hard to reconcile with the fact that no radioactivity was detected outside the reactor during the run." Following fuel and ash isotopic analysis, the authors speculate as to isotopes of especially nickel and lithium being part of the reaction, in particular transmutation of 58
Ni and 60
Ni to 62
Ni, and from 7
Li to 6
Li through some unknown process.

Particle physicist Tommaso Dorigo commented on the 2014 test, called the isotopic measurements "startling" but he expressed deep concern about Rossi being involved in collecting the spent fuel, that the testers may have "overlooked some simple trick" and that "given the extraordinary nature of the claim… this constitutes a major flaw, which totally invalidates any conclusions one might otherwise draw." [39] Astrophysicist Ethan Siegel was highly critical of the test, stating that the testers were not independent, that Rossi could have tampered with the fuel samples, that the 'open calorimeter' setup used was inappropriate, and that "it’s relatively easy to fake the amount of energy being drawn through a power cord if there is a hookup to an external source." [40]

On 31 January 2019, Rossi's company released a new product (E-Cat SK) via live video stream. The product is reported as currently available to be leased by factories as a source of heat. After viewing the video, Tom Casten noted that "The E-Cat demonstration makes giant claims of scientific breakthroughs with no validation". [41] Similarly, the Australian physicist and aerospace engineer Ian Bryce noted that, in the video demonstration, the "inputs, outputs, and measurement points are not defined, making the results largely meaningless", that the nuclear reaction purportedly occurring within the E-Cat SK would "release much deadly radiation. Yet the meters show zero ionizing radiation and no neutrons. Fortunate for the bystanders!" and concludes, regarding Rossi's E-Cat cold fusion device, "there is no real doubt about it being a fake". [42]

Reactions to the claims

Theoretical astrophysicist Ethan Siegel and nuclear physicist Peter Thieberger have pointed out that the claims for the E-Cat are incompatible with the fundamentals of nuclear physics. [43] [44] In particular, the Coulomb barrier for the claimed fusion reaction is so high that it is insurmountable anywhere in the known universe, including the interior of stars. The reaction also would create gamma radiation that would have penetrated the few inches of shielding apparently provided by the E-Cat, inducing acute radiation syndrome in persons in the vicinity of the purported demonstrations. [43] Given numerous other scientific inconsistencies – such as the ratio of isotopes in the supposed copper "fusion product" being identical to that in natural copper [45] – the authors argued that it is now time "for the E-Cat's proponents to provide the provable, testable, reproducible science that can answer these straightforward physics objections." [43]

Peter Ekström, lecturer at the Department of Nuclear Physics at Lund University in Sweden, concluded in May 2011, "I am convinced that the whole story is one big scam, and that it will be revealed in less than one year." [46] He cited the unlikelihood of a chemical reaction being strong enough to overcome the Coulomb barrier, the lack of gamma rays, the lack of explanation for the origin of the extra energy, the lack of the expected radioactivity after fusing a proton with 58Ni, the unexplained occurrence of 11% iron in the spent fuel, the 10% copper in the spent fuel having the same isotopic ratios as natural copper, and the lack of any unstable copper isotope in the spent fuel as if the reactor only produced stable isotopes. [46] Kjell Aleklett, physics professor at Uppsala University, said the percentage of copper was too high for any known reaction of nickel, and the copper had the same isotopic ratio as natural copper. He also stated, "Known chemical reactions cannot explain the amount of energy measured. A nuclear reaction can explain the amount of energy, but the knowledge we have today says that this reaction cannot take place." [47] Scientific skeptic James Randi, discussing the E-Cat in the context of previous cold fusion claims, suggested that it will eventually be proven to be a fraud. [48]

Other cold fusion supporters have been more supportive of the claims. For example, in 2011 Dennis M. Bushnell, Chief Scientist at NASA Langley Research Center, described LENR as a "promising" technology and praised the work of Rossi and Focardi. [49]

Theoretical nuclear physicist Yeong E. Kim of Purdue University has proposed a potential theoretical explanation of the reported results of the device, [50] but has stated that, for confirmation of this theory, "it is very important to carry out Rossi-type experiments independently." [51] Kim had previously put forward this theory to explain the results of the now-discredited [52] Fleischman and Pons cold fusion experiment in 1989. [53]

Steve Featherstone wrote in Popular Science that by the summer of 2012 Rossi's "outlandish claims" for the E-Cat seemed "thoroughly debunked" and that Rossi "looked like a con man clinging to his story to the bitter end." [10]

Patents

An application in 2008 to patent the device internationally received an unfavorable preliminary report on patentability at the World Intellectual Property Organization [54] from the European Patent Office, noting that the description of the device was based on "general statements and speculations" and citing "numerous deficiencies in both the description and in the evidence provided to support its feasibility" as well as incompatibilities with "generally accepted laws of physics and established theories." [55] The patent application was published on 15 October 2009. [1]

On 6 April 2011 an application was approved by the Italian Patent and Trademark Office, which issued a patent for the invention, valid only in Italy. Under then-current Italian law, the examination of the application was more formal and less technical than for the corresponding PCT application. [56] [1] [57]

In March 2014 the US Patent Office replied to Rossi's US patent application with a provisional decision to reject it, saying "The specification is objected to as inoperable. Specifically there is no evidence in the corpus of nuclear science to substantiate the claim that nickel will spontaneously ionize hydrogen gas and therefore 'absorb' the resulting proton". [58] [59]

Lawsuit

In January 2014 a newly formed company, Industrial Heat LLC, announced that it had acquired rights to Rossi's E-Cat technology. [60] [61] [62] In April 2016, Rossi filed a lawsuit in the USA against Industrial Heat, alleging that he was not paid an $89 million licensing fee due after a one-year test period of an E-Cat unit. Industrial Heat's comment on the lawsuit was that after three years of effort they were unable to reproduce Rossi's E-Cat test results. [63] [64] [65] [66] On 5 July 2017 the parties settled; the terms of the settlement were not released. [67] [68]

See also

Related Research Articles

<span class="mw-page-title-main">Cold fusion</span> Hypothetical type of nuclear reaction

Cold fusion is a hypothesized type of nuclear reaction that would occur at, or near, room temperature. It would contrast starkly with the "hot" fusion that is known to take place naturally within stars and artificially in hydrogen bombs and prototype fusion reactors under immense pressure and at temperatures of millions of degrees, and be distinguished from muon-catalyzed fusion. There is currently no accepted theoretical model that would allow cold fusion to occur.

<span class="mw-page-title-main">Neutron</span> Subatomic particle with no charge

The neutron is a subatomic particle, symbol
n
 or
n0
, which has no electric charge, and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, they are both referred to as nucleons. Nucleons have a mass of approximately one atomic mass unit, or dalton. Their properties and interactions are described by nuclear physics. Protons and neutrons are not elementary particles; each is composed of three quarks.

<span class="mw-page-title-main">Nuclear fusion</span> Process of combining atomic nuclei

Nuclear fusion is a reaction in which two or more atomic nuclei, usually deuterium and tritium, combine to form one or more different atomic nuclei and subatomic particles. The difference in mass between the reactants and products is manifested as either the release or absorption of energy. This difference in mass arises due to the difference in nuclear binding energy between the atomic nuclei before and after the reaction. Nuclear fusion is the process that powers active or main-sequence stars and other high-magnitude stars, where large amounts of energy are released.

<span class="mw-page-title-main">Fusor</span> An apparatus to create nuclear fusion

A fusor is a device that uses an electric field to heat ions to a temperature at which they undergo nuclear fusion. The machine induces a potential difference between two metal cages, inside a vacuum. Positive ions fall down this voltage drop, building up speed. If they collide in the center, they can fuse. This is one kind of an inertial electrostatic confinement device – a branch of fusion research.

<span class="mw-page-title-main">Nuclear technology</span> Technology that involves the reactions of atomic nuclei

Nuclear technology is technology that involves the nuclear reactions of atomic nuclei. Among the notable nuclear technologies are nuclear reactors, nuclear medicine and nuclear weapons. It is also used, among other things, in smoke detectors and gun sights.

<span class="mw-page-title-main">Neutron source</span> Device that emits neutrons

A neutron source is any device that emits neutrons, irrespective of the mechanism used to produce the neutrons. Neutron sources are used in physics, engineering, medicine, nuclear weapons, petroleum exploration, biology, chemistry, and nuclear power. Neutron source variables include the energy of the neutrons emitted by the source, the rate of neutrons emitted by the source, the size of the source, the cost of owning and maintaining the source, and government regulations related to the source.

<span class="mw-page-title-main">Neutron moderator</span> Substance that slows down particles with no electric charge

In nuclear engineering, a neutron moderator is a medium that reduces the speed of fast neutrons, ideally without capturing any, leaving them as thermal neutrons with only minimal (thermal) kinetic energy. These thermal neutrons are immensely more susceptible than fast neutrons to propagate a nuclear chain reaction of uranium-235 or other fissile isotope by colliding with their atomic nucleus.

This timeline of nuclear fusion is an incomplete chronological summary of significant events in the study and use of nuclear fusion.

Robert W. Bussard was an American physicist who worked primarily in nuclear fusion energy research. He was the recipient of the Schreiber-Spence Achievement Award for STAIF-2004. He was also a fellow of the International Academy of Astronautics and held a Ph.D. from Princeton University.

<span class="mw-page-title-main">Aneutronic fusion</span> Form of fusion power

Aneutronic fusion is any form of fusion power in which very little of the energy released is carried by neutrons. While the lowest-threshold nuclear fusion reactions release up to 80% of their energy in the form of neutrons, aneutronic reactions release energy in the form of charged particles, typically protons or alpha particles. Successful aneutronic fusion would greatly reduce problems associated with neutron radiation such as damaging ionizing radiation, neutron activation, reactor maintenance, and requirements for biological shielding, remote handling and safety.

<span class="mw-page-title-main">Neutron activation</span> Induction of radioactivity by neutron radiation

Neutron activation is the process in which neutron radiation induces radioactivity in materials, and occurs when atomic nuclei capture free neutrons, becoming heavier and entering excited states. The excited nucleus decays immediately by emitting gamma rays, or particles such as beta particles, alpha particles, fission products, and neutrons. Thus, the process of neutron capture, even after any intermediate decay, often results in the formation of an unstable activation product. Such radioactive nuclei can exhibit half-lives ranging from small fractions of a second to many years.

Naturally occurring nickel (28Ni) is composed of five stable isotopes; 58
Ni
, 60
Ni
, 61
Ni
, 62
Ni
 and 64
Ni
, with 58
Ni
 being the most abundant. 26 radioisotopes have been characterised with the most stable being 59
Ni
 with a half-life of 76,000 years, 63
Ni
 with a half-life of 100.1 years, and 56
Ni
 with a half-life of 6.077 days. All of the remaining radioactive isotopes have half-lives that are less than 60 hours and the majority of these have half-lives that are less than 30 seconds. This element also has 8 meta states.

<span class="mw-page-title-main">National Spherical Torus Experiment</span> US nuclear fusion reactor

The National Spherical Torus Experiment (NSTX) is a magnetic fusion device based on the spherical tokamak concept. It was constructed by the Princeton Plasma Physics Laboratory (PPPL) in collaboration with the Oak Ridge National Laboratory, Columbia University, and the University of Washington at Seattle. It entered service in 1999. In 2012 it was shut down as part of an upgrade program and became NSTX-U, for Upgrade.

<span class="mw-page-title-main">Patterson power cell</span> Supposed energy device

The Patterson power cell is a cold fusion device invented by chemist James A. Patterson, which he claimed created 200 times more energy than it used. Patterson claimed the device neutralized radioactivity without emitting any harmful radiation. Cold fusion was the subject of an intense scientific controversy in 1989, before being discredited in the eyes of mainstream science. Physicist Robert L. Park describes the device as fringe science in his book Voodoo Science.

<span class="mw-page-title-main">Yoshiaki Arata</span>

Yoshiaki Arata was a Japanese physicist. Arata was one of the pioneering researchers into nuclear fusion in Japan and a former professor at Osaka University. He was reported to be a strong nationalist, speaking only Japanese in public. He received the Order of Culture in 2006.

<span class="mw-page-title-main">Nuclear transmutation</span> Conversion of an atom from one element to another

Nuclear transmutation is the conversion of one chemical element or an isotope into another chemical element. Nuclear transmutation occurs in any process where the number of protons or neutrons in the nucleus of an atom is changed.

Sergio Focardi was an Italian physicist and professor emeritus at the University of Bologna. He led the Department of Bologna of the (Italian) National Institute for Nuclear Physics and the Faculty of Mathematical, Physical and Natural Sciences at the University of Bologna.

Andrea Rossi is an Italian entrepreneur who claimed to have invented a cold fusion device.

<span class="mw-page-title-main">Plasma-facing material</span>

In nuclear fusion power research, the plasma-facing material (PFM) is any material used to construct the plasma-facing components (PFC), those components exposed to the plasma within which nuclear fusion occurs, and particularly the material used for the lining the first wall or divertor region of the reactor vessel.

The history of nuclear fusion began early in the 20th century as an inquiry into how stars powered themselves and expanded to incorporate a broad inquiry into the nature of matter and energy, as potential applications expanded to include warfare, energy production and rocket propulsion.

References

  1. 1 2 3 4 Patent application WO 2009125444,Andrea Rossi,"Method and Apparatus for carrying out nickel and hydrogen exothermal reactions",published 2009-10-15.
  2. 1 2 Zyga, Lisa (11 August 2011). "Controversial energy-generating system lacking credibility (w/ video)". PhysOrg .
  3. ↑ Mark Gibbs (17 October 2011). "Hello Cheap Energy, Hello Brave New World". Forbes . the E-Cat is a cold fusion (CF) device (the inventor, Andrea Rossi, prefers to term the technology 'Low Energy Nuclear Reaction' which appears to be the same thing as CF but a less contentious phrasing).
  4. ↑ Lisa Zyga (20 January 2011). "Italian Scientists claim to have demonstrated cold fusion". PhysOrg . Andrea Rossi and Sergio Focardi of the University of Bologna announced that they developed a cold fusion device
  5. ↑ Peter Clarke (24 January 2011). "Italian scientists claim cold fusion success". EE Times . Andrea Rossi and Sergio Focardi of the physics department of the University of Bologna. The two claim to have developed a cold fusion reactor
  6. ↑ "processo ed apparecchiatura per ottenere reazioni esotermiche, in particolare da nickel ed idrogeno" [process and equipment to obtain exothermal reactions, in particular from nickel and hydrogen]. Italian Office for Patents and Trademarks. Archived from the original on 3 February 2016. Retrieved 7 May 2011. Patent Number 0001387256, Deposited 9 April 2008, Issued 6 April 2011, Inventor: Andrea Rossi.
  7. ↑ S. Focardi; A. Rossi (22 March 2010). "A new energy source from nuclear fusion". CiteSeerX   10.1.1.380.5549 .
  8. ↑ Deotto, Fabio (19 January 2011). "Fusione fredda realizzata a Bologna. Sarà vero?" (in Italian). Daily Wired.
  9. ↑ Lisa Zyga (20 January 2011), "Italian Scientists claim to have demonstrated cold fusion", Physorg.com
  10. 1 2 Featherstone, Steve (2012). "Andrea Rossi's Black box infinite energy: a lone Italian inventor says he has built a machine that can power the world. Could the answer to humanity's energy troubles be so simple?". Popular Science . 281 (5): 62.
  11. 1 2 Angelo Saso (3 May 2011). La magia del signor Rossi (in Italian). Rai News. Archived from the original on 13 June 2011. Retrieved 10 July 2011.. Retrieved on 10 July 2011.)
  12. ↑ Benjamin Radford (21 January 2011). "Cold fusion: Cold Fusion Claims Resurface". Discovery.com. Retrieved 21 May 2011.
  13. ↑ "E-cat: l'Università di Bologna non è coinvolta" (in Italian). UNIBO Magazine. University of Bologna. 5 November 2011.
  14. ↑ Mackinson, Thomas (9 November 2011). "Fusione fredda fatta in casa Grande scoperta o grande bufala?". Il Fatto Quotidiano. "The University of Bologna – the notice states – is not involved on E-Cat experiments conducted by Leonardo Corp.
  15. ↑ Mannella, Lorenzo (14 October 2011). "Fusione fredda a Bologna. I dubbi continuano". Daily Wired (Italian edition).. Retrieved on 10 November 2011.
  16. ↑ "E-cat: non-ci sono misure in atto". Università di Bologna. 27 August 2012.
  17. ↑ E-cat: dichiarazione del Dipartimento di Fisica, 26 January 2012, University of Bologna.
  18. 1 2 Natalie Wolchover (2 September 2012). "Fraud claims over E-Cat 'cold fusion' machine heating up". NBC News .
  19. ↑ Ian Bryce. "How Rossi Cold Fusion Tests Misled the World's Scientists" (PDF). Australian Skeptics press release. Archived from the original (PDF) on 1 February 2014.
  20. ↑ "Dick Smith: "Rossi E-CAT ... too fantastic to be true"". Forbes. 24 February 2012. Retrieved 3 October 2012. The "checking the wires" detail is in "E-Cat Proof Challenge: $1,000,000 is a "Clownerie"? (Updated)". Forbes. 14 February 2012.
  21. ↑ "Update – Inventor Rejects Dick Smith Million Dollar Offer". Australian Skeptics. Archived from the original on 21 April 2013. Retrieved 3 October 2012.
  22. ↑ Brandon, John. (2 November 2011). "Cold Fusion Experiment: Major Success or Complex Hoax?". Fox News. Archived from the original on 3 November 2011.
  23. ↑ Hambling, David (29 October 2011). "Success for Andrea Rossi's E-Cat cold fusion system, but mysteries remain". Wired. In other words, a group of unknown, unverifiable people carried out tests which cannot be checked. (...) as a demonstration it would have been more impressive for the reactor in its shipping container to be visibly disconnected while operating.
  24. ↑ Zreick, Irene (15 November 2011). "Fusione fredda: a chi fa gola l'E-Cat?". Focus. (in Italian). Retrieved 18 November 2011. "Il cliente era rappresentato da Domenico Fioravanti, ingegnere, colonnello del Genio in pensione, che pare abbia scelto personalmente che cosa controllare, e come, durante il test. In conferenza Fioravanti affiancava Rossi, ma non-c'è stato modo di strappare neppure un indizio sull'identità dell'azienda rappresentata."
    TRANSLATION: "The customer was represented by Domenico Fioravanti, engineer, retired colonel of the military engineering, who seemed to choose personally what to control, and how, during the test. In the course of the [press] conference Fioravanti was side by side with Rossi, but even a single hint concerning the identity of the represented company was impossible to get."
  25. ↑ Clarke, Peter (24 January 2011). "Italian scientists claim cold fusion success". EE Times.
  26. ↑ Jennifer Ouellette (2011). "Could starships use cold fusion propulsion?". Journal of Nuclear Physics, which is Andrea Rossi's own private journal.
  27. ↑ Focardi, S; Rossi, A (28 February 2010). "A new energy source from nuclear fusion". Journal of Nuclear Physics (blog). Retrieved 18 November 2011.
  28. ↑ Levi, G.; Foschi, E.; Hartman, T.; Höistad, B.; Pettersson, R.; Tegnér, L.; Essén, H. (2013). "Indication of anomalous heat energy production in a reactor device". arXiv: 1305.3913 [physics.gen-ph].
  29. ↑ Mark Gibbs (20 May 2013). "Finally! Independent Testing of Rossi's E-Cat Cold Fusion Device: Maybe The World Will Change After All". Forbes.
  30. ↑ Lisa Zyga (23 May 2013). "Tests find Rossi's E-Cat has an energy density at least 10 times higher than any conventional energy source". PhysOrg .
  31. ↑ Francie Diep (21 May 2013). "Cold Fusion Machine Gets Third-Party Verification, Inventor Says. The E-Cat strikes again". Popular Science.
  32. ↑ Hambling, David. "Cold Fusion gets red hot and aims for EU". Wired UK. Archived from the original on 8 February 2014. Retrieved 2 February 2014.
  33. ↑ "Elforsk" (in Swedish). Archived from the original on 11 February 2014. Retrieved 4 February 2014.
  34. ↑ Ericsson, Göran (2013). "Comments on the report "Indications of anomalous heat energy production in a reactor device containing hydrogen loaded nickel powder"". arXiv: 1306.6364 [physics.gen-ph].
  35. ↑ Dansie, Mark (2 July 2013). "Rossi, The Need For Third Party Validation". Revolution-Green.com. Archived from the original on 4 July 2014. Retrieved 4 July 2013.
  36. ↑ More On Rossi's E-Cat: Ericsson And Pomp Rebut "Independent" Test, 12 July 2013
  37. ↑ Siegel, Ethan (21 May 2013). "The E-Cat is back, and people are still falling for it!". ScienceBlogs . Retrieved 23 May 2013.
  38. ↑ Levi, G.; Foschi, E.; Höistad, B.; Pettersson, R.; Tegnér, L.; Essén, H. (2014). "Observation of abundant heat production from a reactor device and of isotopic changes in the fuel" (PDF). Archived from the original (PDF) on 31 October 2014. Retrieved 11 February 2015.
  39. ↑ Dorigo, Tommaso (11 October 2014). "Cold Fusion: A Better Study on the Infamous E-Cat". Science20 . Retrieved 17 February 2015.
  40. ↑ Siegel, Ethan (15 October 2014). "The E-cat, cold fusion or scientific fraud?". Medium . Retrieved 17 February 2015.
  41. ↑ Casten, Thomas (2019). "Further comments on E-Cat claims". Skeptical Inquirer. 43 (3): 49–50. Archived from the original on 8 August 2019.
  42. ↑ Bryce, Ian (2019). "Rossi's E-Cat: Expose of a claimed cold fusion device". Skeptical Inquirer. 43 (3): 40–48. Archived from the original on 8 August 2019.
  43. 1 2 3 Ethan Siegel, 2011-12-05, The Physics of why the E-Cat's Cold Fusion Claims Collapse
  44. ↑ Jennifer Ouellette, Could starships use cold fusion propulsion? // HowStuffWorks, ()
  45. ↑ "Cold Fusion: Is it Possible? Is it Real? – Starts with a Bang" . Retrieved 22 September 2016.
  46. 1 2 Ekström, Peter (6 May 2011). "Kall Fusion på italienska (Cold fusion – Italian style)" (PDF) (in Swedish and English). Archived from the original (PDF) on 15 May 2011.
  47. ↑ Aleklett, Kjell (11 April 2011). "Rossi energy catalyst – a big hoax or new physics?". Aleklett's Energy Mix (a WordPress blog). Retrieved on 10 July 2011.
  48. ↑ James Randi (18 November 2011). The Randi Show – Cold Fusion and Carl Sagan. James Randi Educational Foundation . Retrieved 21 November 2011. Starting ~7:30 Randi says: "But I... I predict that, as I said just a moment ago there, that this man [Rossi] will probably go on the stock market and sell all kinds of shares and issue all kinds of wonderful reports left and right and, um, the reports will influence everybody—er, not everybody—but those who have money to waste and, uh, they will invest in it and then gradually it will become apparent to everybody: 'Gee, maybe it doesn't work'."
  49. ↑ The Future of Energy: Part 1 Archived 9 August 2011 at the Wayback Machine Podcast Archived 11 October 2011 at the Wayback Machine approved Transcript. At 4 minutes and 34 seconds, Bushnell described several emerging energy technologies, but he identified LENR as "the most interesting and promising at this point". At 10 minutes and 35 seconds, Bushnell continued: "... in January of this year Rossi, backed by Focardi, who had been working on this for many years, and in fact doing some of the best work worldwide, came out and did a demonstration first in January, they re-did it in February, they re-did it in March, where for days they had one of these cells, a small cell, producing in the 10 to 15 kilowatts range, which is far more than enough heat to boil water for tea."
  50. ↑ Kim, Yeong E. (2012), "Nuclear Reactions in Micro/Nano-Scale Metal Particles", Few-Body Systems, 52 (1–4): 25–30, Bibcode:2013FBS....54...25K, doi:10.1007/s00601-012-0374-6, S2CID   9184580
  51. ↑ pre-print paper "Generalized Theory of Bose-Einstein Condensation Nuclear Fusion for Hydrogen-Metal System" – Yeong E. Kim – 18 June 2011 Archived 17 February 2015 at the Wayback Machine
  52. ↑ Reger, Daniel L.; Goode, Scott R.; Ball, David W. (2009). Chemistry: Principles and Practice (3, revised ed.). Cengage Learning. pp. 814–815. ISBN   978-0-534-42012-3. "After several years and multiple experiments by numerous investigators, most of the scientific community now considers the original claims unsupported by the evidence. [from image caption] Virtually every experiment that tried to replicate their claims failed. Electrochemical cold fusion is widely considered to be discredited."
  53. ↑ Kim, Yeong E. (2009), "Theory of Bose–Einstein condensation mechanism for deuteron-induced nuclear reactions in micro/nano-scale metal grains and particles", Naturwissenschaften, 96 (7): 803–811, Bibcode:2009NW.....96..803K, doi:10.1007/s00114-009-0537-6, PMID   19440686, S2CID   7500859
  54. ↑ International Preliminary Report on Patentability. World Intellectual Property Organization. Retrieved on 7 November 2011.
  55. ↑ Alasdair Wilkins (26 January 2011), No, Italian Scientists Have Not Discovered Cold Fusion, Gizmodo.
  56. ↑ Mannella, Lorenzo (14 October 2011). "Fusione fredda a Bologna. I dubbi continuano". Daily Wired (Italian edition). Retrieved on 10 November 2011. "il 6 aprile 2011 è stato rilasciato un brevetto in Italia a nome della Efa srl, la società di Maddalena Pascucci, moglie di Andrea Rossi. La dicitura recita " processo ed apparecchiatura per ottenere reazioni esotermiche, in particolare da nickel ed idrogeno"."
    TRANSLATION: On 6 April 2011 a patent was issued in Italy under the name of Efa srl, the company of Maddalena Pascucci, wife of Andrea Rossi. The heading is: "method and apparatus for carrying out nickel and hydrogen exothermal reactions".
  57. ↑ The patent granted 6 April 2011 Archived 3 February 2016 at the Wayback Machine , by the Ufficio Italiano Brevetti e Marchi Archived 16 July 2011 at the Wayback Machine . Retrieved on 10 July 2011.
  58. ↑ De Carolis, Roberta (2 April 2014). "Fusione fredda: all'E-cat negato anche il brevetto USA" (in Italian). NextMe.
  59. ↑ United States Patent and Trademark Office (26 March 2014), Office communication concerning application 12/736,193
  60. ↑ Hoyle, Amanda (24 January 2014). "Confirmed: Raleigh's Cherokee buys into controversial nuclear tech device". Triangle Business Journal . Retrieved 15 April 2016.
  61. ↑ Main, Douglas (25 January 2014). "Dubious Cold Fusion Machine Acquired By North Carolina Company". Popular Science . Retrieved 15 April 2016.
  62. ↑ Dumaine, Brian (27 September 2015). "This investor is chasing a new kind of fusion". Fortune . Retrieved 15 April 2016.
  63. ↑ Ohnesorge, Lauren K. (7 April 2016). "Scientist sues Raleigh cold fusion startup, Cherokee Investment Partners over $89M licensing fee". Triangle Business Journal . Retrieved 14 April 2016.
  64. ↑ Ramesh, M (12 April 2016). "Cold fusion: This time for real?". The Hindu . Retrieved 14 April 2016.
  65. ↑ "Case 1:16-cv-21199-CMA Document 1 Entered on FLSD Docket 04/05/2016". PACER. 5 April 2016. Retrieved 14 April 2016.
  66. ↑ Hambling, David (20 April 2016). "In Cold Fusion 2.0, Who's Scamming Whom?". Popular Mechanics . Retrieved 20 April 2016.
  67. ↑ Ohnesorge, Lauren. "Dispute between inventor and Raleigh investor over nuclear reaction device ends". Triangle Business Journal. American City Business Journals. Retrieved 4 August 2017.
  68. ↑ "Case 1:16-cv-21199-CMA Document 333 Entered on FLSD Docket 07/06/2017". PACER. 6 July 2017. Retrieved 4 August 2017.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.