Traditional Inuit hunters lack the more elastic timbers used to make bows in temperate and tropical parts of the world. Using sinew cords for the back of the bow, and spruce timber or antler for the belly, however, they build very effective weapons. When hunting polar bears, the bows used are powerful enough, if they do not hit bone, to penetrate completely through the body of the bear.
Spruce wood is nearly inelastic in compression, but usually the best available material for the belly of the bow. Driftwood, antler from caribou, or musk ox horn, have also been used. [1] First, the stave is shaped by stone or iron tools, often to a broad shape up to some 5cm wide to help the material to withstand compression. If made from antler or bone, which are stiff and brittle, the stave might be made of several pieces to allow it to bend. The stave could be straight, reflexed, or deflexed. [2]
The back of the bow is then made of caribou sinews twisted into cables, and attached to the bowstave and to each other by knotting. (In more temperate climates, animal glue has been used to attach sinew to the backs of bows, but this is not practical for use in the Arctic because animal glue gels almost instantly in freezing air. [3] Additionally, Arctic material culture traditionally often lacked both the fuel supplies and the vessels that are needed for prolonged boiling to make animal glue.) Knotted cables can also be raised from the back of the bowstave by spacers, making the bow lighter and more efficient.
The mechanical properties of sinew-backed bows change with changes in humidity, so the bows need frequent adjustment by the archer. The adjustment of tension is done by twisting the backing cables, using short rods of ivory, wood, or bone inserted through the cables. [4]
Varieties of cable-backed bow have been made by non-Inuit cultures. Tlingit and Haida people have also made such bows. [5] A distinct variant of cable-backed bow is the Penobscot bow or Wabenaki bow, invented by Frank Loring (Chief Big Thunder) about 1900. [6] It consists of a small bow attached by cables on the back of a larger main bow.
Blunt arrowheads can be used for hunting small game. "Such an arrow kills a small bird or little animal like a lemming or ground squirrel by stunning it, and does not tear a great hole in it. The boys' arrows nowadays are often headed with empty copper cartridge cases, and I have seen one of these shot clean through the body of a small bird." [7]
Arrows used for hunting larger game in traditional Inuit culture are barbed, [7] often with detachable heads. "For hunting the reindeer the arrow had a long, sharp, bayonet-shaped head made of antler, barbed on one edge and fitted loosely into the shaft. As the Eskimos told us, when they hit a deer with one of these arrows the shaft could drop out, leaving the barbed head in the wound, and the deer would go off, "sleep one night, and then die." [7] "Geese, gulls, and other large fowls were shot with arrows that had long, five-sided heads of walrus ivory, not very sharp and barbed on one edge..." [7] Those used for hunting sea otters were red, attached loosely to the barb with a long red cord. The hunter would shoot and then chase the sea otter, which would be hampered in swimming by the trailing arrowshaft. The hunter would be able to see the shaft's bright color and locate the sea otter, exhausted from the chase. [3]
One sealskin case protects the bow and arrows against moisture, but also has ivory implements to twist, tighten and adjust the bow and cable if needed. [3]
In the late 19th century, sealskin cases to protect the bows and sealskin quivers were noted. "The bow was carried, strung ready for use, in a sheath of tanned sealskin slung across the shoulders in such a way that it could easily be drawn out under the right arm. Nowadays they carry their rifles in similar sheaths. Attached to the sheath was a quiver, also of sealskin, in which they used to keep an assortment of arrows, some of each kind, according to the hunter's needs." [7]
Archery is the sport, practice, or skill of using a bow to shoot arrows. The word comes from the Latin arcus, meaning bow. Historically, archery has been used for hunting and combat. In modern times, it is mainly a competitive sport and recreational activity. A person who practices archery is typically called an archer, bowman, or toxophilite.
An arrow is a fin-stabilized projectile launched by a bow. A typical arrow usually consists of a long, stiff, straight shaft with a weighty arrowhead attached to the front end, multiple fin-like stabilizers called fletchings mounted near the rear, and a slot at the rear end called a nock for engaging the bowstring. A container or bag carrying additional arrows for convenient reloading is called a quiver. Bhann in hindi,(బాణం)bhanam in Telugu, and these were used as a weapon in wars during the time of kings, and even now to hunt preys and as an Olympic game.
In modern archery, a compound bow is a bow that uses a levering system, usually of cables and pulleys, to bend the limbs.
The bow and arrow is a ranged weapon system consisting of an elastic launching device (bow) and long-shafted projectiles (arrows). Humans used bows and arrows for hunting and aggression long before recorded history, and the practice was common to many prehistoric cultures. They were important weapons of war from ancient history until the early modern period, where they were rendered increasingly obsolete by the development of the more powerful and accurate firearms. Today, bows and arrows are mostly used for hunting and sports.
In archery, the shape of the bow is usually taken to be the view from the side. It is the product of the complex relationship of material stresses, designed by a bowyer. This shape, viewing the limbs, is designed to take into account the construction materials, the performance required, and the intended use of the bow.
A composite bow is a traditional bow made from horn, wood, and sinew laminated together, a form of laminated bow. The horn is on the belly, facing the archer, and sinew on the outer side of a wooden core. When the bow is drawn, the sinew and horn store more energy than wood for the same length of bow. The strength can be made similar to that of all-wood "self" bows, with similar draw-length and therefore a similar amount of energy delivered to the arrow from a much shorter bow. However, making a composite bow requires more varieties of material than a self bow, its construction takes much more time, and the finished bow is more sensitive to moisture.
An arrowhead or point is the usually sharpened and hardened tip of an arrow, which contributes a majority of the projectile mass and is responsible for impacting and penetrating a target, as well as to fulfill some special purposes such as signaling.
Fletching is the fin-shaped aerodynamic stabilization device attached on arrows, bolts, darts, or javelins, and are typically made from light semi-flexible materials such as feathers or bark. Each piece of such fin is a fletch, also known as a flight or feather. A fletcher is a person who attaches fletchings to the shaft of arrows.
A ranged weapon is any weapon that can engage targets beyond hand-to-hand distance, i.e. at distances greater than the physical reach of the user holding the weapon itself. The act of using such a weapon is also known as shooting. It is sometimes also called projectile weapon or missile weapon because it typically works by launching solid projectiles ("missiles"), though technically a fluid-projector and a directed-energy weapon are also ranged weapons. In contrast, a weapon intended to be used in hand-to-hand combat is called a melee weapon.
A bowyer is a master-craftsman who makes bows. Though this was once a widespread profession, the importance of bowyers and of bows was diminished by the introduction of gunpowder weaponry. However, the trade has survived and many bowyers continue to produce high-end bows.
A flatbow is a bow with non-recurved, flat, relatively wide limbs that are approximately rectangular in cross-section. Because the limbs are relatively wide, flatbows will usually narrow and become deeper at the handle, with a rounded, non-bending handle for easier grip. This design differs from that of a longbow, which has rounded limbs that are circular or D shaped in cross-section, and is usually widest at the handle. A flatbow can be just as long as a longbow, but can also be very short. Typical lengths would be 68–70 inches (172.5–178 cm) for a flatbow, 70–72 inches (178–183 cm) for an English longbow, and 72–76 inches (183–193 cm) for a warbow-weight English longbow; but these styles may easily overlap each other. Traditional flatbows are usually wooden self bows, though laminated and composite flatbows have been made in ancient and modern times. Modern flatbows commonly use fiberglass.
A longbow is a type of tall bow that makes a fairly long draw possible. A longbow is not significantly recurved. Its limbs are relatively narrow and are circular or D-shaped in cross section. Flatbows can be just as long, but in cross-section, a flatbow has limbs that are approximately rectangular.
Archery, or the use of bow and arrows, was probably developed in Africa by the later Middle Stone Age. It is documented as part of warfare and hunting from the classical period until the end of the 19th century, when it was made obsolete by the invention and spread of repeating firearms.
A self bow or simple bow is a bow made from a single piece of wood. Extra material such as horn nocks on the ends, or built-up handles, would normally be accepted as part of a self bow. Some modern authorities would also accept a bow spliced together in the handle from two pieces of wood.
A laminated bow is an archery bow in which different materials are laminated together to form the bow stave itself. Traditional composite bows are normally not included, although their construction with horn, wood, and sinew might bring them within the above definition.
A bowstring joins the two ends of the bow stave and launches the arrow. Desirable properties include light weight, strength, resistance to abrasion, and resistance to water. Mass has most effect at the center of the string; one gram (0.035 oz) of extra mass in the middle of the string slows the arrow about as much as 3.5 grams (0.12 oz) at the ends.
This is a list of archery terms, including both the equipment and the practice. A brief description for each word or phrase is also included.
A cable-backed bow is a bow reinforced with a cable on the back. The cable is made from either animal, vegetable or synthetic fibers and is tightened to increase the strength of the bow. A cable will relieve tension stress from the back of the bow by raising its neutral plane: the border between the back of the bow that stretches and the belly of the bow that compresses when bent. A good cable-backed bow can thus be made of poor-quality wood, weak in tension. The material, the diameter, the distance from the back of the wooden element, and the level of stress (tightness) of the cable determines how much it relieves tension stress from the wooden element of the bow and increases the power of the shot.
In archery, a recurve bow is one of the main shapes a bow can take, with limbs that curve away from the archer when unstrung. A recurve bow stores more energy and delivers energy more efficiently than the equivalent straight-limbed bow, giving a greater amount of energy and speed to the arrow. A recurve will permit a shorter bow than the simple straight limb bow for given arrow energy, and this form was often preferred by archers in environments where long weapons could be cumbersome, such as in brush and forest terrain, or while on horseback.
The Holmegaard bows are a series of self bows found in the bogs of Northern Europe dating from the Mesolithic period. They are named after the Holmegaard area of Denmark in which the first and oldest specimens were found, and are the oldest bows discovered anywhere in the world.