Fault (breeding)

Last updated • 6 min readFrom Wikipedia, The Free Encyclopedia

In animal breed standards, a fault is an aspect of appearance or temperament that is considered detrimental to the breed type of the animal's breed. In dogs, faults have to do with the externally observable qualities of the dog such as appearance, movement, and temperament. Qualities separately tested such as tests for ability in specific work or sports, tests for genetic health, tests for general health or specific inherited disease, or any other specific tests for characteristics that cannot be directly observed are not referred to as faults. Minor faults may or may not have anything to do with the individual dog's ability to work or suitability as a pet.

Contents

Defining specific faults

Faults are formally defined in reference to the breed standard of the specific dog breed, and, due to the extreme variability of the dog ("Phenotypic variation among dog breeds, whether it be in size, shape, or behavior, is greater than for any other animal" [1] ), a single set of faults cannot be generically described for all dog breeds. Wikipedia articles for individual breeds should describe what are considered faults in that particular breed.

Purpose and use

Faults are evaluated as part of the judging process in conformation shows. As the purpose of conformation shows is to assist breeders in the selection of breeding stock by rewarding with championships the dogs which, through external observation only, are the best representatives of the breed, major faults or an excess of minor faults would prevent a dog from completing a championship and being bred. Faults may or may not interfere with the individual dog's working ability, or its qualities as a pet. Current advances in genetic testing are also used by responsible breeders in selecting breeding stock, in addition to visual evaluations by a judge in the conformation ring, although genetic testing and other tests are outside the scope of the written breed standard.

Major and minor faults

Faults may be either major faults (preventing the dog from being shown in the conformation ring or being bred by responsible breeders) or minor faults, such as coat texture, that can easily be corrected by careful breeding of the next generation. A major fault would be a breed type fault "which diminishes the overall look of the breed." [2] Another major fault would be visible structural problems of the dog that prevent the animal from doing the type of work for which it was bred. Dogs that run with great speed use the flexibility of their back; a back that is too arched or too flat will restrict the dog's speed, and would be seen as a fault. [3] Other major faults may involve temperament; "Aggressive behaviour is a serious temperament fault in a Lab." [4]

Interpretation of the standards

Since dogs have enormous variation in their appearance, what is or is not considered desirable or undesirable depends on the individual breed's appearance and historical background (what kind of work it was bred to do). Individual breed clubs, whose members write the breed standard for their breed, decide which aspects of appearance and temperament that breeders should work towards eliminating in the breed. Those undesirable aspects of appearance and temperament are called faults. What constitutes a fault may differ from breed to breed. For example, an aloof and somewhat aggressive temperament might be suitable for a livestock guardian dog, but would be a completely unacceptable fault in a lap dog. [5] Faults may be serious enough to require disqualification in a conformation show, eliminating the dog from winning a championship in conformation, or they may be minor, to be measured by the judge against the dog's good qualities.

Some breed standards are punctilious in the extreme, spelling out exactly what constitutes a fault in every part of the animal, and the degree to which each fault must be penalized. Some are more loosely written, leaving more open to interpretation by the judge, or not describing an attribute at all, which leaves the matter up to the individual judge's opinion. Some breed standards states that a particular fault is to be penalized to the degree of the severity of the fault, leaving the exact determination up to the judge. Definitions which are open to human interpretation cause much ill-will at conformation shows when exhibitors disagree with the decision of the judge, despite the fact that the fanciers hire the judges and pay entry fees for the judge's opinion of their breeding stock.

For example, most breed standards list a ‘scissor bite’ as the correct one. A level bite, an under-bite or an overbite may be considered faults, depending on the breed standard description. In a conformation show, the judge must decide the degree of severity of the faulty bite, and therefore how much the dog must be marked down in relation to other dogs. However, some breed standards describe only a level bite as acceptable; other breed standards accept the scissor bite. The all-breed judge must know which bite is or is not a fault for each breed that he or she judges.

A given coat colour may be acceptable, it may be preferred, it may be the only acceptable colour, or it may be a fault. Sometimes these colours change over time, often after much in-fighting and bitterness.For many years, the only acceptable coat pattern in a Dalmatian was white with black spots, very recently liver spots have been accepted as a variant, but black still appears to be the preference of most. However, other colors like with lemon, blue, brindle and tricolor spots are disqualified. A black German Shepherd Dog is penalized; a white GSD is disqualified, as the color is believed to be linked to deafness and other serious health problems. Many GSD fanciers like the white colour and continue to breed for the white coat; some lobby for its acceptance into the breed standard, others argue for the creation of a new breed. In the future, genetic testing may show which of these variants in color are actually linked to health problems and which are not, which may lead to modification of the breed standards. Other breeds such as the Flat-coated Retriever only black and liver are acceptable, but yellow is a disqualification.

Working dogs

The breed standards for working dogs usually specify that scars, broken teeth or other damage that evidence injuries sustained during a working career (often termed ‘honourable scars and injuries') are not to be penalized in conformation showing. The Australian Cattle Dog is an example of this as are some terriers, where the breed standards specifically state that scars are not to be penalized as faults in conformation.

Details of breed standards and precise definition of faults are decided upon by breed clubs and are often hotly debated. Sometimes even minute details are argued over by fanciers and breeders to a degree that would astound the average pet owner who never plans on breeding his or her pet. Fanciers note that such irrelevant seeming qualities have the capacity to change the breed over time.

Often it is the breeders of working dogs who are the most vehement, pointing out that changes in fashion and fancy have led to what they see as a loss in working dog qualities of many breed that have show lines, through rewarding of external appearance without requirements for work. In some breed clubs, such as the Jack Russell Terrier Club of America, working ability and health are valued over conformation to the breed standard. However, even in the JRTCA breed standard only externally observed aspects of the dog are described, as working tests and genetic tests are beyond the scope of a breed standard, which exists as a description of the dog, not its DNA. [6]

See also

Related Research Articles

<span class="mw-page-title-main">American Kennel Club</span> American purebreed dog registry

The American Kennel Club (AKC) is a registry of purebred dog pedigrees in the United States. In addition to maintaining its pedigree registry, this kennel club also promotes and sanctions events for purebred dogs, including the Westminster Kennel Club Dog Show, an annual event which predates the official forming of the AKC, the National Dog Show and the AKC National Championship. The AKC is a non-member partner with the Fédération Cynologique Internationale. The AKC recognizes 200 dog breeds, as of 2022.

<span class="mw-page-title-main">Staffordshire Bull Terrier</span> British breed of dog

The Staffordshire Bull Terrier, also called the Staffy or Stafford, is a purebred dog of small to medium size in the terrier group that originated in the northern parts of Birmingham and in the Black Country of Staffordshire, for which it is named. They descended from 19th-century bull terriers that were developed by crossing bulldogs with various terriers to create a generic type of dog generally known as bull and terriers. Staffords share the same ancestry with the modern Bull Terrier, although the two breeds developed along independent lines, and do not resemble each other. Modern Staffords more closely resemble the old type of bull terrier, and were first recognised as a purebred dog breed by The Kennel Club of Great Britain in 1935.

<span class="mw-page-title-main">Barbet (dog)</span> Dog breed

The Barbet is a breed of dog; it is a medium-sized French water dog. It is listed in Group 8 by the Société Centrale Canine, the French Kennel Club and the Fédération Cynologique Internationale.

<span class="mw-page-title-main">Dog show</span> Competitive exhibition of dogs

A dog show is an animal show, an event where dogs are exhibited. A conformation show, also referred to as a breed show, is a kind of dog show in which a judge, familiar with a specific dog breed, evaluates individual purebred dogs for how well the dogs conform to the established breed type for their breed, as described in a breed's individual breed standard.

<span class="mw-page-title-main">Goldendoodle</span> Dog breed

The Goldendoodle, also known as a Groodle, is a designer dog created by crossbreeding a Golden Retriever and a Poodle. First widely bred in the 1990s, they are bred in three different sizes—each corresponding to the size of Poodle used as a parent.

<span class="mw-page-title-main">Mongrel</span> Dog with mixed breeds

A mongrel, mutt or mixed-breed dog is a dog that does not belong to one officially recognized breed, including those that result from intentional breeding. Although the term mixed-breed dog is sometimes preferred, many mongrels have no known purebred ancestors.

<span class="mw-page-title-main">Rat Terrier</span> Dog breed

The Rat Terrier is an American dog breed with a background as a farm dog and hunting companion. They share much ancestry with the small hunting dogs known as feists. Common throughout family farms in the 1920s and 1930s, they are now recognized by the United (UKC) and American Kennel Clubs (AKC) and are considered a rare breed. Rat Terriers are an intelligent and active breed that can be kept both for pest control and as a family pet.

<span class="mw-page-title-main">Portuguese Water Dog</span> Dog breed

The Portuguese Water Dog originated from the Algarve region of Portugal. From there the breed expanded to all around Portugal's coast, where they were taught to herd fish into fishermen's nets, retrieve lost tackle or broken nets, and act as couriers from ship to ship, or ship to shore. Portuguese Water Dogs rode in fishing trawlers as they worked their way from the Atlantic waters of Portugal to the waters off the coast of Iceland fishing for cod.

<span class="mw-page-title-main">Breed standard</span> Written description of what a breed should look like

In animal husbandry or animal fancy, a breed standard is a description of the characteristics of a hypothetical or ideal example of a breed. The description may include physical or morphological detail, genetic criteria, or criteria of athletic or productive performance. It may also describe faults or deficiencies that would disqualify an animal from registration or from reproduction. The hypothetical ideal example may be called a "breed type".

<span class="mw-page-title-main">Dog crossbreed</span> Dog type

Dog crossbreeds, sometimes called designer dogs, are dogs which have been intentionally bred from two or more recognized dog breeds. They are not dogs with no purebred ancestors, but are not otherwise recognised as breeds in their own right, and do not necessarily breed true.

<span class="mw-page-title-main">Nova Scotia Duck Tolling Retriever</span> Dog breed

The Nova Scotia Duck Tolling Retriever is a medium-sized gundog bred primarily for hunting. It is often referred to as a "toller". It is the smallest of the retrievers, and is often mistaken for a small Golden Retriever. Tollers are intelligent, eager to please, alert, and energetic. The name "toller" is derived from their ability to lure waterfowl within gunshot range. The breed originated in Yarmouth County, Nova Scotia, Canada. The American Kennel Club ranks the toller as the 87th most popular dog breed.

<span class="mw-page-title-main">Glen of Imaal Terrier</span> Dog breed

The Glen of Imaal Terrier is a breed of dog of the terrier category and one of four Irish terrier breeds. It is sometimes called the Irish Glen of Imaal Terrier or the Wicklow Terrier, and the name of the breed is often shortened by fanciers to just Glen.

<span class="mw-page-title-main">Bull Terrier</span> Dog breed

The Bull Terrier is a breed of dog in the terrier family. There is also a miniature version of this breed which is officially known as the Miniature Bull Terrier. This breed originates in 19th century England. Originally bred for vermin control and bloodsports, this breed can be independent and stubborn.

<span class="mw-page-title-main">Curly-coated Retriever</span> Dog breed

The Curly-coated Retriever is a breed of dog originally bred in England for upland bird and waterfowl hunting. It is the tallest of the retrievers and is easily distinguishable by the mass of tight curls covering its body. Curly Coated and Wavy Coated were the first two recognised retriever breeds, established as early as 1860.

<span class="mw-page-title-main">Eurasier</span> Dog breed

The Eurasier, or Eurasian, is a spitz type breed of dog that originated in Germany through cross-breeding between popular European and Asian Spitz. It is widely known as a wonderful companion that maintains its own personality, has a dignified reserve with strangers, has a strong bond to its family, and is relatively easy to train.

<span class="mw-page-title-main">Boykin Spaniel</span> Dog breed

The Boykin Spaniel is a medium-sized breed of dog, a Spaniel bred for hunting wild turkeys and ducks in the Wateree River Swamp of South Carolina, in the United States. It is the state dog of South Carolina, where it was discovered and further developed by hunters in the 1900s. 1 September, 1984 is Boykin Spaniel Day in South Carolina.

<span class="mw-page-title-main">Bull and terrier</span> Mixed breed

Bull and terrier was a common name for crossbreeds between bulldogs and terriers in the early 1800s. Other names included half-and-halfs and half-breds. It was a time in history when, for thousands of years, dogs were classified by use or function, unlike the modern pets of today that were bred to be conformation show dogs and family pets. Bull and terrier crosses were originally bred to function as fighting dogs for bull- and bear-baiting, and other popular blood sports during the Victorian era. The sport of bull baiting required a dog with attributes such as tenacity and courage, a wide frame with heavy bone, and a muscular, protruding jaw. By crossing bulldogs with various terriers from Ireland and Great Britain, breeders introduced "gameness and agility" into the hybrid mix.

<span class="mw-page-title-main">Conformation (dog)</span> Dog appearances, by breed

Conformation in dogs refers solely to the externally visible details of a dog's structure and appearance, as defined in detail by each dog breed's written breed standard. A dog that conforms to most of the items of description in its individual breed standard is said to have good conformation. Unlike equine conformation, there are no fixed rules for dog conformation, as dogs are the most variable in appearance of any animals. Instead, conformation in dogs is based on the dog type from which the breed developed, along with many details that have been added to the breed standard for purposes of differentiation from other breeds, for working reasons, or for enhancing the beauty of the animals from the viewpoint of the fanciers who wrote the breed standards.

<span class="mw-page-title-main">Golden Retriever</span> Scottish breed of dog

The Golden Retriever is a Scottish breed of retriever dog of medium size. It is characterised by a gentle and affectionate nature and a striking golden coat. It is commonly kept as a pet and is among the most frequently registered breeds in several Western countries. It is a frequent competitor in dog shows and obedience trials; it is also used as a gun dog and may be trained for use as a guide dog.

<span class="mw-page-title-main">Australian Cobberdog</span> Purebred dog breed

The Australian Cobberdog is a purebred dog breed developed in Australia by the Rutland Manor and Tegan Park Labradoodle Breeding & Research Centres. The breed was created as a continuation of Wally Conron's efforts to create a definable and carefully researched labradoodle. This effort was also in response to the increase in demand for labradoodles which had led to breeders referring to any combination of Labrador Retrievers and Poodles as labradoodles without temperament or hypoallergenic criteria. The inconsistency of standards for labradoodles led to the distinction of Australian Labradoodle and the further distinction of Cobberdog attributed to a purebred dog breed with more strict standards for breeding, temperament, and appearance.

References

  1. "Scientists fetch useful information from dog genome publications, Cold Spring Harbor Laboratory, December 7, 2005; published online in Bio-Medicine". Archived from the original on November 19, 2020. Retrieved November 4, 2008.
  2. "Definition of a Show Dog, by Steve Wolfson, published online by the American Rottweiler Club, accessed 3 October 2008". Archived from the original on 6 September 2008. Retrieved 4 November 2008.
  3. K-9 Structure and Terminology, by Edward M. Gilbert Jr. and Thelma R. Brown, Chapter 2, Dog Gaits; Howell Books, 1995 ISBN   0-87605-421-1
  4. Labrador Retrievers by Edith Bryan, Calgary Purebred Labrador Retriever Rescue, accessed 3 October 2008
  5. As an example, the Maltese standard requires the dog to be "Sweet-tempered." Archived 2008-10-14 at the Wayback Machine
  6. Jack Russell Terrier breed standard